From: "Vineetha G. Jaya Kumaran" <vineetha.g.jaya.kumaran@xxxxxxxxx> Hi, This patch set enables support for PWM on the Intel Keem Bay SoC. Keem Bay is an ARM based SoC, and the GPIO module allows configuration of 6 PWM outputs. Patch 1 adds the PWM driver and Patch 2 is for the required Device Tree bindings documentation. This driver was tested on the Keem Bay evaluation module board. Thank you. Best regards, Vineetha Changes since v2: -Include documentation about HW limitation/behaviour -Use hex values for KMB_PWM_COUNT_MAX -Redefine register macros -Utilize FIELD_GET/FIELD_PREP for calculating pwm_l/h_count and pwm_count -Round up duty cycle/period values -Get current hardware state in .apply instead of cached values -Do a polarity check before .enabled -Round high time/low time to closest value -Set enable bit in KMB_PWM_LEADIN_OFFSET to 0 in probe -Correct the naming for MODULE_ALIAS -Add additionalProperties: false in DT bindings Changes since v1: -Updated licensing info, "clocks" property and example in DT bindings -Updated name of DT bindings document to match compatible string -Removed 1 patch for addition of new sysfs attribute "count" -Added support for COMPILE_TEST in Kconfig -Updated naming of defines and regmap attribute -Updated calculation of waveform high time and low time -Added range checking for waveform high/low time -Implemented .get_state -Removed register writes for lead-in and count values (left to default) -Updated register access to single-access -Folded keembay_pwm_enable/disable_channel, keembay_pwm_config_period/duty_cycle, and keembay_pwm_config into keembay_pwm_apply -Updated error messages/error codes -Removed pwm_disable from keembay_pwm_remove -Removed clk_prepare/clk_enable/clk_disable from driver Lai, Poey Seng (1): pwm: Add PWM driver for Intel Keem Bay Vineetha G. Jaya Kumaran (1): dt-bindings: pwm: keembay: Add bindings for Intel Keem Bay PWM .../devicetree/bindings/pwm/intel,keembay-pwm.yaml | 47 ++++ drivers/pwm/Kconfig | 9 + drivers/pwm/Makefile | 1 + drivers/pwm/pwm-keembay.c | 236 +++++++++++++++++++++ 4 files changed, 293 insertions(+) create mode 100644 Documentation/devicetree/bindings/pwm/intel,keembay-pwm.yaml create mode 100644 drivers/pwm/pwm-keembay.c -- 1.9.1
