Re: [PATCH v8 1/2] dt-binding: Add DSI/LVDS TC358775 bridge bindings

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Vinay.

On Wed, Jul 29, 2020 at 06:01:21PM +0530, Vinay Simha B N wrote:
> Hi All,
> 
> Please Review the patch
> 
> On Fri, Jul 10, 2020 at 7:11 PM Vinay Simha BN <simhavcs@xxxxxxxxx> wrote:
> 
> > - license modified to (GPL-2.0-only OR BSD-2-Clause)
> > - single-link and dual-link lvds description and
> >   examples are added
> > - proper indentation
> > - VESA/JEIDA formats picked from panel-lvds dts
> > - dsi data-lanes property removed, it will be picked
> >   from dsi0 ports
> > - dual-link lvds port added and implemented
> > - converted from .txt to .yaml
> >
> > Signed-off-by: Vinay Simha BN <simhavcs@xxxxxxxxx>
> > Reviewed-by: Sam Ravnborg <sam@xxxxxxxxxxxx>
> > Reviewed-by: Rob Herring <robh@xxxxxxxxxx>

The binding is already reviewed by Rob and me - as you have recorded
above. It will be applied when the driver is ready.

	Sam

> > ---
> > v1:
> >  Initial version wast .txt file
> >
> > v2:
> >  From txt to yaml file format
> >
> > v3:
> > * Andrzej Hajda review comments incorporated
> >   dual port lvds implemented
> >
> > * Laurent Pinchart review comments incorporated
> >   dsi lanes property removed and it is dynamically
> >   picked from the dsi ports
> >   VESA/JEIDA format picked from panel-lvds dts
> >
> > v4:
> > * Sam Ravnborg review comments incorporated
> >   }' is indented properly in examples data-lanes
> >   description for single-link and dual-link lvds
> >
> > v5:
> > * Sam Ravnborg review comments incorporated
> >   license modified to (GPL-2.0-only OR BSD-2-Clause)
> >   changelog added
> >
> > v6:
> > * No changes, revision version mentioned to inline with
> >   driver file
> >
> > v7:
> > * change log added
> >   Reviewed-by: Sam Ravnborg <sam@xxxxxxxxxxxx>
> >
> > v8:
> > * Reviewed-by: Rob Herring <robh@xxxxxxxxxx>
> > * change log modified in reverse chronological order
> > ---
> >  .../bindings/display/bridge/toshiba,tc358775.yaml  | 215
> > +++++++++++++++++++++
> >  1 file changed, 215 insertions(+)
> >  create mode 100644
> > Documentation/devicetree/bindings/display/bridge/toshiba,tc358775.yaml
> >
> > diff --git
> > a/Documentation/devicetree/bindings/display/bridge/toshiba,tc358775.yaml
> > b/Documentation/devicetree/bindings/display/bridge/toshiba,tc358775.yaml
> > new file mode 100644
> > index 0000000..31f085d
> > --- /dev/null
> > +++
> > b/Documentation/devicetree/bindings/display/bridge/toshiba,tc358775.yaml
> > @@ -0,0 +1,215 @@
> > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> > +%YAML 1.2
> > +---
> > +$id: http://devicetree.org/schemas/display/bridge/toshiba,tc358775.yaml#
> > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > +
> > +title: Toshiba TC358775 DSI to LVDS bridge bindings
> > +
> > +maintainers:
> > + - Vinay Simha BN <simhavcs@xxxxxxxxx>
> > +
> > +description: |
> > + This binding supports DSI to LVDS bridge TC358775
> > +
> > + MIPI DSI-RX Data 4-lane, CLK 1-lane with data rates up to 800 Mbps/lane.
> > + Video frame size:
> > + Up to 1600x1200 24-bit/pixel resolution for single-link LVDS display
> > panel
> > + limited by 135 MHz LVDS speed
> > + Up to WUXGA (1920x1200 24-bit pixels) resolution for dual-link LVDS
> > display
> > + panel, limited by 270 MHz LVDS speed.
> > +
> > +properties:
> > +  compatible:
> > +    const: toshiba,tc358775
> > +
> > +  reg:
> > +    maxItems: 1
> > +    description: i2c address of the bridge, 0x0f
> > +
> > +  vdd-supply:
> > +    maxItems: 1
> > +    description:  1.2V LVDS Power Supply
> > +
> > +  vddio-supply:
> > +    maxItems: 1
> > +    description: 1.8V IO Power Supply
> > +
> > +  stby-gpios:
> > +    maxItems: 1
> > +    description: Standby pin, Low active
> > +
> > +  reset-gpios:
> > +    maxItems: 1
> > +    description: Hardware reset, Low active
> > +
> > +  ports:
> > +    type: object
> > +    description:
> > +      A node containing input and output port nodes with endpoint
> > definitions
> > +      as documented in
> > +      Documentation/devicetree/bindings/media/video-interfaces.txt
> > +    properties:
> > +      "#address-cells":
> > +        const: 1
> > +
> > +      "#size-cells":
> > +        const: 0
> > +
> > +      port@0:
> > +        type: object
> > +        description: |
> > +          DSI Input. The remote endpoint phandle should be a
> > +          reference to a valid mipi_dsi_host device node.
> > +
> > +      port@1:
> > +        type: object
> > +        description: |
> > +          Video port for LVDS output (panel or connector).
> > +
> > +      port@2:
> > +        type: object
> > +        description: |
> > +          Video port for Dual link LVDS output (panel or connector).
> > +
> > +    required:
> > +      - port@0
> > +      - port@1
> > +
> > +required:
> > + - compatible
> > + - reg
> > + - vdd-supply
> > + - vddio-supply
> > + - stby-gpios
> > + - reset-gpios
> > + - ports
> > +
> > +examples:
> > + - |
> > +    #include <dt-bindings/gpio/gpio.h>
> > +
> > +    /* For single-link LVDS display panel */
> > +
> > +    i2c@78b8000 {
> > +        /* On High speed expansion */
> > +        label = "HS-I2C2";
> > +        reg = <0x078b8000 0x500>;
> > +        clock-frequency = <400000>; /* fastmode operation */
> > +        #address-cells = <1>;
> > +        #size-cells = <0>;
> > +
> > +        tc_bridge: bridge@f {
> > +            compatible = "toshiba,tc358775";
> > +            reg = <0x0f>;
> > +
> > +            vdd-supply = <&pm8916_l2>;
> > +            vddio-supply = <&pm8916_l6>;
> > +
> > +            stby-gpios = <&msmgpio 99 GPIO_ACTIVE_LOW>;
> > +            reset-gpios = <&msmgpio 72 GPIO_ACTIVE_LOW>;
> > +
> > +            ports {
> > +                #address-cells = <1>;
> > +                #size-cells = <0>;
> > +
> > +                port@0 {
> > +                    reg = <0>;
> > +                    d2l_in_test: endpoint {
> > +                        remote-endpoint = <&dsi0_out>;
> > +                    };
> > +                };
> > +
> > +                port@1 {
> > +                    reg = <1>;
> > +                    lvds_out: endpoint {
> > +                        remote-endpoint = <&panel_in>;
> > +                    };
> > +                };
> > +            };
> > +        };
> > +    };
> > +
> > +    dsi@1a98000 {
> > +        reg = <0x1a98000 0x25c>;
> > +        reg-names = "dsi_ctrl";
> > +
> > +        ports {
> > +            #address-cells = <1>;
> > +            #size-cells = <0>;
> > +            port@1 {
> > +                reg = <1>;
> > +                dsi0_out: endpoint {
> > +                    remote-endpoint = <&d2l_in_test>;
> > +                    data-lanes = <0 1 2 3>;
> > +                };
> > +             };
> > +         };
> > +     };
> > +
> > + - |
> > +    /* For dual-link LVDS display panel */
> > +
> > +    i2c@78b8000 {
> > +        /* On High speed expansion */
> > +        label = "HS-I2C2";
> > +        reg = <0x078b8000 0x500>;
> > +        clock-frequency = <400000>; /* fastmode operation */
> > +        #address-cells = <1>;
> > +        #size-cells = <0>;
> > +
> > +        tc_bridge_dual: bridge@f {
> > +            compatible = "toshiba,tc358775";
> > +            reg = <0x0f>;
> > +
> > +            vdd-supply = <&pm8916_l2>;
> > +            vddio-supply = <&pm8916_l6>;
> > +
> > +            stby-gpios = <&msmgpio 99 GPIO_ACTIVE_LOW>;
> > +            reset-gpios = <&msmgpio 72 GPIO_ACTIVE_LOW>;
> > +
> > +            ports {
> > +                #address-cells = <1>;
> > +                #size-cells = <0>;
> > +
> > +                port@0 {
> > +                    reg = <0>;
> > +                    d2l_in_dual: endpoint {
> > +                        remote-endpoint = <&dsi0_out_dual>;
> > +                    };
> > +                };
> > +
> > +                port@1 {
> > +                    reg = <1>;
> > +                    lvds0_out: endpoint {
> > +                        remote-endpoint = <&panel_in0>;
> > +                    };
> > +                };
> > +
> > +                port@2 {
> > +                    reg = <2>;
> > +                    lvds1_out: endpoint {
> > +                        remote-endpoint = <&panel_in1>;
> > +                    };
> > +                };
> > +            };
> > +        };
> > +    };
> > +
> > +    dsi@1a98000 {
> > +        reg = <0x1a98000 0x25c>;
> > +        reg-names = "dsi_ctrl";
> > +
> > +        ports {
> > +            #address-cells = <1>;
> > +            #size-cells = <0>;
> > +            port@1 {
> > +                reg = <1>;
> > +                dsi0_out_dual: endpoint {
> > +                    remote-endpoint = <&d2l_in_dual>;
> > +                    data-lanes = <0 1 2 3>;
> > +                };
> > +             };
> > +         };
> > +     };
> > +...
> > --
> > 2.1.2
> >
> >
> 
> -- 
> regards,
> vinaysimha

> _______________________________________________
> dri-devel mailing list
> dri-devel@xxxxxxxxxxxxxxxxxxxxx
> https://lists.freedesktop.org/mailman/listinfo/dri-devel




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux