Re: [PATCH v7 3/3] ARM: dts: stm32: add initial support for stm32mp157-odyssey board

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hello Marcin,

On 8/9/20 6:44 PM, Marcin Sloniewski wrote:
> Add support for Seeed Studio's stm32mp157c odyssey board.
> Board consists of SoM with stm32mp157c with 4GB eMMC and 512 MB DDR3 RAM
> and carrier board with USB and ETH interfaces, SD card connector,
> wifi and BT chip AP6236.
> 
> In this patch only basic kernel boot is supported and interfacing
> SD card and on-board eMMC.
> 
> Signed-off-by: Marcin Sloniewski <marcin.sloniewski@xxxxxxxxx>

Reviewed-by: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>

> ---

> +
> +&rng1 {
> +	status = "okay";
> +};

I think we should put this into the SoC dtsi instead.

Cheers
Ahmad


-- 
Pengutronix e.K.                           |                             |
Steuerwalder Str. 21                       | http://www.pengutronix.de/  |
31137 Hildesheim, Germany                  | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux