Re: [PATCH v5 2/6] PCI: uniphier: Add misc interrupt handler to invoke PME and AER

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 2020/07/15 19:04, Kunihiko Hayashi wrote:
Hi Lorenzo,

On 2020/07/14 22:27, Lorenzo Pieralisi wrote:
On Thu, Jun 18, 2020 at 05:38:09PM +0900, Kunihiko Hayashi wrote:
The misc interrupts consisting of PME, AER, and Link event, is handled
by INTx handler, however, these interrupts should be also handled by
MSI handler.

Define what you mean please.

[snip]

I think this is wrong. pp->irq_domain is the DWC MSI domain, how do
you know that hwirq 0 *is* the AER/PME interrupt ?

When AER/PME drivers are probed, AER/PME interrupts are registered
as MSI-0.

The pcie_message_numbers() function refers the following fields of
PCI registers,

    - PCI_EXP_FLAGS_IRQ (for PME)
    - PCI_ERR_ROOT_AER_IRQ (for AER)

and decides AER/PME interrupts numbers in MSI domain.
Initial values of both fields are 0, so these interrupts are set to MSI-0.

However, pcie_uniphier driver doesn't know that these interrupts are MSI-0.
Surely using 0 here is wrong.
I think that the method to get virq for AER/PME from pcieport is needed.

To avoid using hard-coded MSI-0, I'll add new function to get a virq number
corresponding to each service (AER/PME) to portdrv.

I'll update the series in v6.

Thank you,
---
Best Regards
Kunihiko Hayashi



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux