Some r8a7745-iwg22d-sodimm.dts device nodes are not sorted alphabetically. This patch fixes the sorting of nodes and also fixes a typo in the stmpe node. Signed-off-by: Biju Das <biju.das.jz@xxxxxxxxxxxxxx> --- v1->v2:- Fixed sorting of sound node v1:- https://patchwork.kernel.org/patch/11690969/ --- arch/arm/boot/dts/r8a7745-iwg22d-sodimm.dts | 112 ++++++++++---------- 1 file changed, 56 insertions(+), 56 deletions(-) diff --git a/arch/arm/boot/dts/r8a7745-iwg22d-sodimm.dts b/arch/arm/boot/dts/r8a7745-iwg22d-sodimm.dts index b15b1b088a32..1c7b37a01f0a 100644 --- a/arch/arm/boot/dts/r8a7745-iwg22d-sodimm.dts +++ b/arch/arm/boot/dts/r8a7745-iwg22d-sodimm.dts @@ -53,42 +53,6 @@ clock-frequency = <26000000>; }; - rsnd_sgtl5000: sound { - compatible = "simple-audio-card"; - simple-audio-card,format = "i2s"; - simple-audio-card,bitclock-master = <&sndcodec>; - simple-audio-card,frame-master = <&sndcodec>; - - sndcpu: simple-audio-card,cpu { - sound-dai = <&rcar_sound>; - }; - - sndcodec: simple-audio-card,codec { - sound-dai = <&sgtl5000>; - }; - }; - - vccq_sdhi0: regulator-vccq-sdhi0 { - compatible = "regulator-gpio"; - - regulator-name = "SDHI0 VccQ"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - - gpios = <&gpio0 20 GPIO_ACTIVE_LOW>; - gpios-states = <1>; - states = <3300000 1>, <1800000 0>; - }; - - vccq_panel: regulator-vccq-panel { - compatible = "regulator-fixed"; - regulator-name = "Panel VccQ"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - gpio = <&gpio1 13 GPIO_ACTIVE_LOW>; - enable-active-high; - }; - backlight_lcd: backlight { compatible = "pwm-backlight"; pwms = <&tpu 3 5000000 PWM_POLARITY_INVERTED>; @@ -107,19 +71,40 @@ }; }; }; -}; -&du { - pinctrl-0 = <&du0_pins>; - pinctrl-names = "default"; + vccq_panel: regulator-vccq-panel { + compatible = "regulator-fixed"; + regulator-name = "Panel VccQ"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio1 13 GPIO_ACTIVE_LOW>; + enable-active-high; + }; - status = "okay"; + vccq_sdhi0: regulator-vccq-sdhi0 { + compatible = "regulator-gpio"; - ports { - port@0 { - endpoint { - remote-endpoint = <&lcd_in>; - }; + regulator-name = "SDHI0 VccQ"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + + gpios = <&gpio0 20 GPIO_ACTIVE_LOW>; + gpios-states = <1>; + states = <3300000 1>, <1800000 0>; + }; + + rsnd_sgtl5000: sound { + compatible = "simple-audio-card"; + simple-audio-card,format = "i2s"; + simple-audio-card,bitclock-master = <&sndcodec>; + simple-audio-card,frame-master = <&sndcodec>; + + sndcpu: simple-audio-card,cpu { + sound-dai = <&rcar_sound>; + }; + + sndcodec: simple-audio-card,codec { + sound-dai = <&sgtl5000>; }; }; }; @@ -150,6 +135,21 @@ status = "okay"; }; +&du { + pinctrl-0 = <&du0_pins>; + pinctrl-names = "default"; + + status = "okay"; + + ports { + port@0 { + endpoint { + remote-endpoint = <&lcd_in>; + }; + }; + }; +}; + &hscif1 { pinctrl-0 = <&hscif1_pins>; pinctrl-names = "default"; @@ -171,6 +171,15 @@ status = "okay"; clock-frequency = <400000>; + sgtl5000: codec@a { + compatible = "fsl,sgtl5000"; + #sound-dai-cells = <0>; + reg = <0x0a>; + clocks = <&audio_clock>; + VDDA-supply = <®_3p3v>; + VDDIO-supply = <®_3p3v>; + }; + stmpe811@44 { compatible = "st,stmpe811"; reg = <0x44>; @@ -179,7 +188,7 @@ /* 3.25 MHz ADC clock speed */ st,adc-freq = <1>; - /* ADC converstion time: 80 clocks */ + /* ADC conversion time: 80 clocks */ st,sample-time = <4>; /* 12-bit ADC */ st,mod-12b = <1>; @@ -203,15 +212,6 @@ st,touch-det-delay = <5>; }; }; - - sgtl5000: codec@a { - compatible = "fsl,sgtl5000"; - #sound-dai-cells = <0>; - reg = <0x0a>; - clocks = <&audio_clock>; - VDDA-supply = <®_3p3v>; - VDDIO-supply = <®_3p3v>; - }; }; &pci1 { -- 2.17.1
