Hi Sakari, Thank you for the review. On Tue, Aug 4, 2020 at 9:18 AM Sakari Ailus <sakari.ailus@xxxxxxxxxxxxxxx> wrote: > > Hi Prabhakar, > > On Mon, Aug 03, 2020 at 03:31:47PM +0100, Lad Prabhakar wrote: > > Fallback to parallel mode if bus_type doesn't match the supported > > interfaces by the driver. > > > > Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@xxxxxxxxxxxxxx> > > --- > > drivers/media/i2c/ov5640.c | 6 ++++++ > > 1 file changed, 6 insertions(+) > > > > diff --git a/drivers/media/i2c/ov5640.c b/drivers/media/i2c/ov5640.c > > index 08c67250042f..4e88b0540740 100644 > > --- a/drivers/media/i2c/ov5640.c > > +++ b/drivers/media/i2c/ov5640.c > > @@ -3074,6 +3074,12 @@ static int ov5640_probe(struct i2c_client *client) > > return ret; > > } > > > > + /* fallback to parallel mode */ > > + if (sensor->ep.bus_type != V4L2_MBUS_PARALLEL && > > + sensor->ep.bus_type != V4L2_MBUS_CSI2_DPHY && > > + sensor->ep.bus_type != V4L2_MBUS_BT656) > > + sensor->ep.bus_type = V4L2_MBUS_PARALLEL; > > You basically need the type from the v4l2_fwnode_endpoint_parse(), and if > you don't have any of the above bus types, probe should fail. The old > bindings were documented in a way that either parallel or CSI-2 bus will be > used, and there were no defaults. So all should be well. > The bus_type is coming from v4l2_fwnode_endpoint_parse(), I'll add the check to fail if type doesn't match the supported interfaces and drop the above check. Cheers, Prabhakar > -- > Sakari Ailus
