Hi, On Fri, Jul 31, 2020 at 11:18:28AM +0300, Laurentiu Palcu wrote: > From: Laurentiu Palcu <laurentiu.palcu@xxxxxxx> > > Hi, > > This patchset adds initial DCSS support for iMX8MQ chip. Initial support > includes only graphics plane support (no video planes), no HDR10 capabilities, > no graphics decompression (only linear, tiled and super-tiled buffers allowed). > > Support for the rest of the features will be added incrementally, in subsequent > patches. > > The patchset was tested with both HDP driver (in the downstream tree) and the upstream > MIPI-DSI driver (with a couple of patches on top, to make it work correctly with DCSS). > > Thanks, > Laurentiu > > Changes in v9: > * Fixed a compilation issue found by Guido in his setup: 'select > VIDEOMODE_HELPERS' was missing from Kconfig; > * Use imx8mq-clock.h in the bindings file so one can understand what > those clock values mean; > * no other changes done. Couldn't address the hang Guido reported as > it's not happening in my setup. However, in my tree, there are some > extra NWL and ADV patches applied on top of upstream ones... Also, > removing them and testing only with upstream, even if there's no > image out, does not produce a hang... :/ I don't think this should hold up merging. Cheers, -- Guido > > Changes in v8: > * Removed 'select RESET_CONTROLLER" from Kconfig as Philipp pointed > out. SRC is not used in DCSS driver; > * Nothing else changed; > > Changes in v7: > * Added a patch to initialize the connector using the drm_bridge_connector > API as Sam suggested. Tested it using NWL_DSI and ADV7535 with > Guido's patch [1] applied and one fix for ADV [2]. Also, some extra > patches for ADV and NWL were needed, from our downstream tree, which > will be upstreamed soon by their author; > * Rest of the patches are untouched; > > [1] https://lists.freedesktop.org/archives/dri-devel/2020-July/273025.html > [2] https://lists.freedesktop.org/archives/dri-devel/2020-July/273132.html > > Changes in v6: > * Addressed Rob's comment and added "additionalProperties: false" at > the end of the bindings' properties. However, this change surfaced > an issue with the assigned-clock* properties not being documented in > the properties section. Added the descriptions and the bindings patch > will need another review; > * Added an entry for DCSS driver in the MAINTAINERS file; > * Removed the component framework patch altogether; > > Changes in v5: > * Rebased to latest; > * Took out component framework support and made it a separate patch so > that people can still test with HDP driver, which makes use of it. > But the idea is to get rid of it once HDP driver's next versions > will remove component framework as well; > * Slight improvement to modesetting: avoid cutting off the pixel clock > if the new mode and the old one are equal. Also, in this case, is > not necessary to wait for DTG to shut off. This would allow to switch > from 8b RGB to 12b YUV422, for example, with no interruptions (at least > from DCSS point of view); > * Do not fire off CTXLD when going to suspend, unless it still has > entries that need to be committed to DCSS; > * Addressed Rob's comments on bindings; > > Changes in v4: > * Addressed Lucas and Philipp's comments: > * Added DRM_KMS_CMA_HELPER dependency in Kconfig; > * Removed usage of devm_ functions since I'm already doing all the > clean-up in the submodules_deinit(); > * Moved the drm_crtc_arm_vblank_event() in dcss_crtc_atomic_flush(); > * Removed en_completion variable from dcss_crtc since this was > introduced mainly to avoid vblank timeout warnings which were fixed > by arming the vblank event in flush() instead of begin(); > * Removed clks_on and irq_enabled flags since all the calls to > enabling/disabling clocks and interrupts were balanced; > * Removed the custom atomic_commit callback and used the DRM core > helper and, in the process, got rid of a workqueue that wasn't > necessary anymore; > * Fixed some minor DT binding issues flagged by Philipp; > * Some other minor changes suggested by Lucas; > * Removed YUV formats from the supported formats as these cannot work > without the HDR10 module CSCs and LUTs. Will add them back when I > will add support for video planes; > > Changes in v3: > * rebased to latest linux-next and made it compile as drmP.h was > removed; > * removed the patch adding the VIDEO2_PLL clock. It's already applied; > * removed an unnecessary 50ms sleep in the dcss_dtg_sync_set(); > * fixed a a spurious hang reported by Lukas Hartmann and encountered > by me several times; > * mask DPR and DTG interrupts by default, as they may come enabled from > U-boot; > > Changes in v2: > * Removed '0x' in node's unit-address both in DT and yaml; > * Made the address region size lowercase, to be consistent; > * Removed some left-over references to P010; > * Added a Kconfig dependency of DRM && ARCH_MXC. This will also silence compilation > issues reported by kbuild for other architectures; > > > Laurentiu Palcu (5): > drm/imx: compile imx directory by default > drm/imx: Add initial support for DCSS on iMX8MQ > drm/imx/dcss: use drm_bridge_connector API > MAINTAINERS: Add entry for i.MX 8MQ DCSS driver > dt-bindings: display: imx: add bindings for DCSS > > .../bindings/display/imx/nxp,imx8mq-dcss.yaml | 108 +++ > MAINTAINERS | 8 + > drivers/gpu/drm/Makefile | 2 +- > drivers/gpu/drm/imx/Kconfig | 2 + > drivers/gpu/drm/imx/Makefile | 1 + > drivers/gpu/drm/imx/dcss/Kconfig | 9 + > drivers/gpu/drm/imx/dcss/Makefile | 6 + > drivers/gpu/drm/imx/dcss/dcss-blkctl.c | 70 ++ > drivers/gpu/drm/imx/dcss/dcss-crtc.c | 219 +++++ > drivers/gpu/drm/imx/dcss/dcss-ctxld.c | 424 +++++++++ > drivers/gpu/drm/imx/dcss/dcss-dev.c | 325 +++++++ > drivers/gpu/drm/imx/dcss/dcss-dev.h | 177 ++++ > drivers/gpu/drm/imx/dcss/dcss-dpr.c | 562 ++++++++++++ > drivers/gpu/drm/imx/dcss/dcss-drv.c | 138 +++ > drivers/gpu/drm/imx/dcss/dcss-dtg.c | 409 +++++++++ > drivers/gpu/drm/imx/dcss/dcss-kms.c | 198 +++++ > drivers/gpu/drm/imx/dcss/dcss-kms.h | 44 + > drivers/gpu/drm/imx/dcss/dcss-plane.c | 405 +++++++++ > drivers/gpu/drm/imx/dcss/dcss-scaler.c | 826 ++++++++++++++++++ > drivers/gpu/drm/imx/dcss/dcss-ss.c | 180 ++++ > 20 files changed, 4112 insertions(+), 1 deletion(-) > create mode 100644 Documentation/devicetree/bindings/display/imx/nxp,imx8mq-dcss.yaml > create mode 100644 drivers/gpu/drm/imx/dcss/Kconfig > create mode 100644 drivers/gpu/drm/imx/dcss/Makefile > create mode 100644 drivers/gpu/drm/imx/dcss/dcss-blkctl.c > create mode 100644 drivers/gpu/drm/imx/dcss/dcss-crtc.c > create mode 100644 drivers/gpu/drm/imx/dcss/dcss-ctxld.c > create mode 100644 drivers/gpu/drm/imx/dcss/dcss-dev.c > create mode 100644 drivers/gpu/drm/imx/dcss/dcss-dev.h > create mode 100644 drivers/gpu/drm/imx/dcss/dcss-dpr.c > create mode 100644 drivers/gpu/drm/imx/dcss/dcss-drv.c > create mode 100644 drivers/gpu/drm/imx/dcss/dcss-dtg.c > create mode 100644 drivers/gpu/drm/imx/dcss/dcss-kms.c > create mode 100644 drivers/gpu/drm/imx/dcss/dcss-kms.h > create mode 100644 drivers/gpu/drm/imx/dcss/dcss-plane.c > create mode 100644 drivers/gpu/drm/imx/dcss/dcss-scaler.c > create mode 100644 drivers/gpu/drm/imx/dcss/dcss-ss.c > > -- > 2.23.0 >
