Re: [PATCH v5 3/4] ARM: dts: sun8i-a83t-tbs-a711: Add support for the vibrator motor

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Ondrej,

On 20-07-30 15:24, Ondrej Jirman wrote:
> The board has a vibrator motor. Hook it to the input subsystem.
> 
> According to the PMIC specification, LDO needs to be enabled (value 0b11)
> to achieve the specified max driving current of 150mA. We can't drive
> the motor with just GPIO mode.
> 
> In GPIO mode the chip is probably just using the regular CMOS logic
> output circuitry (typically limited to around 20-35mA, but not specified
> in this datasheet).
> 
> Signed-off-by: Ondrej Jirman <megous@xxxxxxxxxx>
> ---
>  arch/arm/boot/dts/sun8i-a83t-tbs-a711.dts | 5 +++++
>  1 file changed, 5 insertions(+)
> 
> diff --git a/arch/arm/boot/dts/sun8i-a83t-tbs-a711.dts b/arch/arm/boot/dts/sun8i-a83t-tbs-a711.dts
> index bfc9bb277a49..a278a1e33930 100644
> --- a/arch/arm/boot/dts/sun8i-a83t-tbs-a711.dts
> +++ b/arch/arm/boot/dts/sun8i-a83t-tbs-a711.dts
> @@ -99,6 +99,11 @@ panel_input: endpoint {
>  		};
>  	};
>  
> +	vibrator {
> +		compatible = "gpio-vibrator";
> +		vcc-supply = <&reg_ldo_io1>;
> +	};

Please keep the alphabetical order. I also would merge patch 3 and 4
into one since they are realted changes.

Regards,
  Marco

> +
>  	reg_gps: reg-gps {
>  		compatible = "regulator-fixed";
>  		regulator-name = "gps";



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux