It is possible to turn the motor on/off just by enabling/disabling the vcc-supply. Change the binding to require either enable-gpios or vcc-supply or both. Signed-off-by: Ondrej Jirman <megous@xxxxxxxxxx> Reviewed-by: Rob Herring <robh@xxxxxxxxxx> --- Documentation/devicetree/bindings/input/gpio-vibrator.yaml | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) diff --git a/Documentation/devicetree/bindings/input/gpio-vibrator.yaml b/Documentation/devicetree/bindings/input/gpio-vibrator.yaml index 2384465eaa19..082ac06471db 100644 --- a/Documentation/devicetree/bindings/input/gpio-vibrator.yaml +++ b/Documentation/devicetree/bindings/input/gpio-vibrator.yaml @@ -24,7 +24,12 @@ properties: required: - compatible - - enable-gpios + +anyOf: + - required: + - enable-gpios + - required: + - vcc-supply additionalProperties: false -- 2.27.0
