IPQ8074 uses secure PIL. Hence, adding the support for the same. Signed-off-by: Gokul Sriram Palanisamy <gokulsri@xxxxxxxxxxxxxx> Signed-off-by: Sricharan R <sricharan@xxxxxxxxxxxxxx> Signed-off-by: Nikhil Prakash V <nprakash@xxxxxxxxxxxxxx> --- drivers/remoteproc/qcom_q6v5_wcss.c | 43 ++++++++++++++++++++++++++++++++++--- 1 file changed, 40 insertions(+), 3 deletions(-) diff --git a/drivers/remoteproc/qcom_q6v5_wcss.c b/drivers/remoteproc/qcom_q6v5_wcss.c index e13d1c6..ba932e6 100644 --- a/drivers/remoteproc/qcom_q6v5_wcss.c +++ b/drivers/remoteproc/qcom_q6v5_wcss.c @@ -18,6 +18,7 @@ #include <linux/regulator/consumer.h> #include <linux/reset.h> #include <linux/soc/qcom/mdt_loader.h> +#include <linux/qcom_scm.h> #include "qcom_common.h" #include "qcom_pil_info.h" #include "qcom_q6v5.h" @@ -86,6 +87,9 @@ #define TCSR_WCSS_CLK_ENABLE 0x14 #define MAX_HALT_REG 3 + +#define WCNSS_PAS_ID 6 + enum { WCSS_IPQ8074, WCSS_QCS404, @@ -134,6 +138,7 @@ struct q6v5_wcss { unsigned int crash_reason_smem; u32 version; bool requires_force_stop; + bool need_mem_protection; struct qcom_rproc_glink glink_subdev; struct qcom_rproc_ssr ssr_subdev; @@ -152,6 +157,7 @@ struct wcss_data { int ssctl_id; const struct rproc_ops *ops; bool requires_force_stop; + bool need_mem_protection; }; static int q6v5_wcss_reset(struct q6v5_wcss *wcss) @@ -251,6 +257,15 @@ static int q6v5_wcss_start(struct rproc *rproc) qcom_q6v5_prepare(&wcss->q6v5); + if (wcss->need_mem_protection) { + ret = qcom_scm_pas_auth_and_reset(WCNSS_PAS_ID); + if (ret) { + dev_err(wcss->dev, "wcss_reset failed\n"); + return ret; + } + goto wait_for_reset; + } + /* Release Q6 and WCSS reset */ ret = reset_control_deassert(wcss->wcss_reset); if (ret) { @@ -285,6 +300,7 @@ static int q6v5_wcss_start(struct rproc *rproc) if (ret) goto wcss_q6_reset; +wait_for_reset: ret = qcom_q6v5_wait_for_start(&wcss->q6v5, 5 * HZ); if (ret == -ETIMEDOUT) dev_err(wcss->dev, "start timed out\n"); @@ -717,6 +733,15 @@ static int q6v5_wcss_stop(struct rproc *rproc) struct q6v5_wcss *wcss = rproc->priv; int ret; + if (wcss->need_mem_protection) { + ret = qcom_scm_pas_shutdown(WCNSS_PAS_ID); + if (ret) { + dev_err(wcss->dev, "not able to shutdown\n"); + return ret; + } + goto pas_done; + } + /* WCSS powerdown */ if (wcss->requires_force_stop) { ret = qcom_q6v5_request_stop(&wcss->q6v5); @@ -741,6 +766,7 @@ static int q6v5_wcss_stop(struct rproc *rproc) return ret; } +pas_done: clk_disable_unprepare(wcss->prng_clk); qcom_q6v5_unprepare(&wcss->q6v5); @@ -764,9 +790,15 @@ static int q6v5_wcss_load(struct rproc *rproc, const struct firmware *fw) struct q6v5_wcss *wcss = rproc->priv; int ret; - ret = qcom_mdt_load_no_init(wcss->dev, fw, rproc->firmware, - 0, wcss->mem_region, wcss->mem_phys, - wcss->mem_size, &wcss->mem_reloc); + if (wcss->need_mem_protection) + ret = qcom_mdt_load(wcss->dev, fw, rproc->firmware, + WCNSS_PAS_ID, wcss->mem_region, + wcss->mem_phys, wcss->mem_size, + &wcss->mem_reloc); + else + ret = qcom_mdt_load_no_init(wcss->dev, fw, rproc->firmware, + 0, wcss->mem_region, wcss->mem_phys, + wcss->mem_size, &wcss->mem_reloc); if (ret) return ret; @@ -1032,6 +1064,9 @@ static int q6v5_wcss_probe(struct platform_device *pdev) if (!desc) return -EINVAL; + if (desc->need_mem_protection && !qcom_scm_is_available()) + return -EPROBE_DEFER; + rproc = rproc_alloc(&pdev->dev, pdev->name, desc->ops, desc->firmware_name, sizeof(*wcss)); if (!rproc) { @@ -1045,6 +1080,7 @@ static int q6v5_wcss_probe(struct platform_device *pdev) wcss->version = desc->version; wcss->requires_force_stop = desc->requires_force_stop; + wcss->need_mem_protection = desc->need_mem_protection; ret = q6v5_wcss_init_mmio(wcss, pdev); if (ret) @@ -1113,6 +1149,7 @@ static const struct wcss_data wcss_ipq8074_res_init = { .wcss_q6_reset_required = true, .ops = &q6v5_wcss_ipq8074_ops, .requires_force_stop = true, + .need_mem_protection = true, }; static const struct wcss_data wcss_qcs404_res_init = { -- 2.7.4