From: Jisheng Zhang <Jisheng.Zhang@xxxxxxxxxxxxx>
Convert the mp886x binding to DT schema format using json-schema.
Signed-off-by: Jisheng Zhang <Jisheng.Zhang@xxxxxxxxxxxxx>
---
.../devicetree/bindings/regulator/mp886x.txt | 31 ----------
.../bindings/regulator/mps,mp886x.yaml | 58 +++++++++++++++++++
2 files changed, 58 insertions(+), 31 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/regulator/mp886x.txt
create mode 100644 Documentation/devicetree/bindings/regulator/mps,mp886x.yaml
diff --git a/Documentation/devicetree/bindings/regulator/mp886x.txt b/Documentation/devicetree/bindings/regulator/mp886x.txt
deleted file mode 100644
index e747000cebba..000000000000
--- a/Documentation/devicetree/bindings/regulator/mp886x.txt
+++ /dev/null
@@ -1,31 +0,0 @@
-Monolithic Power Systems MP8867/MP8869 voltage regulator
-
-Required properties:
-- compatible: Must be one of the following.
- "mps,mp8867"
- "mps,mp8869"
-- reg: I2C slave address.
-- enable-gpios: enable gpios.
-- mps,fb-voltage-divider: An array of two integers containing the resistor
- values R1 and R2 of the feedback voltage divider in kilo ohms.
-
-Optional properties:
-- mps,switch-frequency: The valid switch frequency in Hertz. Available values
- are: 500000, 750000, 1000000, 1250000, 1500000
-
-Any property defined as part of the core regulator binding, defined in
-./regulator.txt, can also be used.
-
-Example:
-
- vcpu: regulator@62 {
- compatible = "mps,mp8869";
- regulator-name = "vcpu";
- regulator-min-microvolt = <700000>;
- regulator-max-microvolt = <850000>;
- regulator-always-on;
- regulator-boot-on;
- enable-gpios = <&porta 1 GPIO_ACTIVE_LOW>;
- mps,fb-voltage-divider = <80 240>;
- reg = <0x62>;
- };
diff --git a/Documentation/devicetree/bindings/regulator/mps,mp886x.yaml b/Documentation/devicetree/bindings/regulator/mps,mp886x.yaml
new file mode 100644
index 000000000000..991f2de7eda8
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/mps,mp886x.yaml
@@ -0,0 +1,58 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/regulator/mps,mp886x.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Monolithic Power Systems MP8867/MP8869 voltage regulator
+
+maintainers:
+ - Jisheng Zhang <jszhang@xxxxxxxxxx>
+
+properties:
+ compatible:
+ enum:
+ - mps,mp8867
+ - mps,mp8869
+
+ reg:
+ maxItems: 1
+
+ enable-gpios:
+ description: GPIO to enable/disable the regulator.
+ maxItems: 1
+
+ mps,fb-voltage-divider:
+ description: An array of two integers containing the resistor
+ values R1 and R2 of the feedback voltage divider in kilo ohms.
+ $ref: "/schemas/types.yaml#/definitions/uint32-array"
+
+ mps,switch-frequency:
+ description: The valid switch frequency in Hertz.
+ enum: [500000, 750000, 1000000, 1250000, 1500000]
+ $ref: "/schemas/types.yaml#/definitions/uint32"
+
+required:
+ - compatible
+ - reg
+ - enable-gpios
+ - mps,fb-voltage-divider
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ regulator@62 {
+ compatible = "mps,mp8869";
+ regulator-name = "vcpu";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1150000>;
+ enable-gpios = <&porta 1 GPIO_ACTIVE_LOW>;
+ mps,fb-voltage-divider = <80 240>;
+ reg = <0x62>;
+ };
+ };
+
+...
--
2.28.0.rc1
