Hi All, The following is a v4 version of the series [1][2][3] that adds an IRQChip driver for the local interrupt controller present within a Programmable Real-Time Unit and Industrial Communication Subsystem (PRU-ICSS) present on a number of TI SoCs including OMAP architecture based AM335x, AM437x, AM57xx SoCs, Keystone 2 architecture based 66AK2G SoCs, Davinci architecture based OMAP-L138/DA850 SoCs and the latest K3 architecture based AM65x and J721E SoCs. Please see the v1 cover-letter [1] for details about the features of this interrupt controller. More details can be found in any of the supported SoC TRMs. Eg: Chapter 30.1.6 of AM5728 TRM [4] Please see the individual patches for exact changes in each patch, following are the main changes from v3: - Change interrupt-cells to 3 in order to provide 2-level mapping description in DT for interrupts routed to the main CPU as Marc requested (patch #1 and patch #2). - Get rid of the two distinct code paths in the xlate function and allow to proceed only with 3 parameters description as Marc suggested (patch #2). - Due to above modification squash patch #6 of previous patchset into patch #2. - Merge the irqs-reserved and irqs-shared to one property (patch #1 and #2). [1] https://patchwork.kernel.org/cover/11034561/ [2] https://patchwork.kernel.org/cover/11069749/ [3] https://patchwork.kernel.org/cover/11639055/ [4] http://www.ti.com/lit/pdf/spruhz6 Best regards Grzegorz David Lechner (1): irqchip/irq-pruss-intc: Implement irq_{get,set}_irqchip_state ops Grzegorz Jaszczyk (1): irqchip/irq-pruss-intc: Add a PRUSS irqchip driver for PRUSS interrupts Suman Anna (3): dt-bindings: irqchip: Add PRU-ICSS interrupt controller bindings irqchip/irq-pruss-intc: Add logic for handling reserved interrupts irqchip/irq-pruss-intc: Add support for ICSSG INTC on K3 SoCs .../interrupt-controller/ti,pruss-intc.yaml | 157 +++++ drivers/irqchip/Kconfig | 10 + drivers/irqchip/Makefile | 1 + drivers/irqchip/irq-pruss-intc.c | 659 +++++++++++++++++++++ 4 files changed, 827 insertions(+) create mode 100644 Documentation/devicetree/bindings/interrupt-controller/ti,pruss-intc.yaml create mode 100644 drivers/irqchip/irq-pruss-intc.c -- 2.7.4
