Re: [PATCH v6 02/13] dt-bindings: mfd: Add bindings for sl28cpld

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Am 2020-07-28 09:24, schrieb Lee Jones:
On Sun, 26 Jul 2020, Michael Walle wrote:

Add a device tree bindings for the board management controller found on
the Kontron SMARC-sAL28 board.

Signed-off-by: Michael Walle <michael@xxxxxxxx>
Reviewed-by: Rob Herring <robh@xxxxxxxxxx>
---
Changes since v5:
 - none

Changes since v4:
 - fix the regex of the unit-address

Changes since v3:
 - see cover letter

 .../bindings/gpio/kontron,sl28cpld-gpio.yaml  |  54 +++++++
 .../hwmon/kontron,sl28cpld-hwmon.yaml         |  27 ++++
 .../kontron,sl28cpld-intc.yaml                |  54 +++++++
.../bindings/mfd/kontron,sl28cpld.yaml | 153 ++++++++++++++++++
 .../bindings/pwm/kontron,sl28cpld-pwm.yaml    |  35 ++++
 .../watchdog/kontron,sl28cpld-wdt.yaml        |  35 ++++
 6 files changed, 358 insertions(+)
create mode 100644 Documentation/devicetree/bindings/gpio/kontron,sl28cpld-gpio.yaml create mode 100644 Documentation/devicetree/bindings/hwmon/kontron,sl28cpld-hwmon.yaml create mode 100644 Documentation/devicetree/bindings/interrupt-controller/kontron,sl28cpld-intc.yaml create mode 100644 Documentation/devicetree/bindings/mfd/kontron,sl28cpld.yaml create mode 100644 Documentation/devicetree/bindings/pwm/kontron,sl28cpld-pwm.yaml create mode 100644 Documentation/devicetree/bindings/watchdog/kontron,sl28cpld-wdt.yaml

diff --git a/Documentation/devicetree/bindings/gpio/kontron,sl28cpld-gpio.yaml b/Documentation/devicetree/bindings/gpio/kontron,sl28cpld-gpio.yaml
new file mode 100644
index 000000000000..9a63a158a796
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/kontron,sl28cpld-gpio.yaml
@@ -0,0 +1,54 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/gpio/kontron,sl28cpld-gpio.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: GPIO driver for the sl28cpld board management controller
+
+maintainers:
+  - Michael Walle <michael@xxxxxxxx>
+
+description: |
+  This module is part of the sl28cpld multi-function device. For more
+ details see Documentation/devicetree/bindings/mfd/kontron,sl28cpld.yaml.

Paths are normally relative.

grep Documentation/ Documentation

I know there are a lot false positives (esp in the first one)..

$ grep -r "\.\./" Documentation | wc -l
1826
$ grep -r "Documentation/" Documentation|wc -l
2862


+  There are three flavors of the GPIO controller, one full featured
+  input/output with interrupt support (kontron,sl28cpld-gpio), one
+ output-only (kontron,sl28-gpo) and one input-only (kontron,sl28-gpi).
+
+  Each controller supports 8 GPIO lines.
+
+properties:
+  compatible:
+    enum:
+      - kontron,sl28cpld-gpio
+      - kontron,sl28cpld-gpi
+      - kontron,sl28cpld-gpo
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  "#interrupt-cells":
+    const: 2
+
+  interrupt-controller: true
+
+  "#gpio-cells":
+    const: 2
+
+  gpio-controller: true
+
+  gpio-line-names:
+      minItems: 1
+      maxItems: 8
+
+required:
+  - compatible
+  - "#gpio-cells"
+  - gpio-controller
+
+additionalProperties: false
diff --git a/Documentation/devicetree/bindings/hwmon/kontron,sl28cpld-hwmon.yaml b/Documentation/devicetree/bindings/hwmon/kontron,sl28cpld-hwmon.yaml
new file mode 100644
index 000000000000..1cebd61c6c32
--- /dev/null
+++ b/Documentation/devicetree/bindings/hwmon/kontron,sl28cpld-hwmon.yaml
@@ -0,0 +1,27 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/hwmon/kontron,sl28cpld-hwmon.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Hardware monitoring driver for the sl28cpld board management controller
+
+maintainers:
+  - Michael Walle <michael@xxxxxxxx>
+
+description: |
+  This module is part of the sl28cpld multi-function device. For more
+ details see Documentation/devicetree/bindings/mfd/kontron,sl28cpld.yaml.
+
+properties:
+  compatible:
+    enum:
+      - kontron,sl28cpld-fan
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+
+additionalProperties: false
diff --git a/Documentation/devicetree/bindings/interrupt-controller/kontron,sl28cpld-intc.yaml b/Documentation/devicetree/bindings/interrupt-controller/kontron,sl28cpld-intc.yaml
new file mode 100644
index 000000000000..4c39e9ff9aea
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/kontron,sl28cpld-intc.yaml
@@ -0,0 +1,54 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/kontron,sl28cpld-intc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Interrupt controller driver for the sl28cpld board management controller
+
+maintainers:
+  - Michael Walle <michael@xxxxxxxx>
+
+description: |
+  This module is part of the sl28cpld multi-function device. For more
+ details see Documentation/devicetree/bindings/mfd/kontron,sl28cpld.yaml.
+
+ The following interrupts are available. All types and levels are fixed
+  and handled by the board management controller.
+
+  ==== ============= ==================================
+   IRQ line/device   description
+  ==== ============= ==================================
+    0  RTC_INT#      Interrupt line from on-board RTC
+    1  SMB_ALERT#    Event on SMB_ALERT# line (P1)
+    2  ESPI_ALERT0#  Event on ESPI_ALERT0# line (S43)
+    3  ESPI_ALERT1#  Event on ESPI_ALERT1# line (S44)
+    4  PWR_BTN#      Event on PWR_BTN# line (P128)
+    5  SLEEP#        Event on SLEEP# line (S149)
+    6  watchdog      Interrupt of the internal watchdog
+    7  n/a           not used
+  ==== ============= ==================================
+
+properties:
+  compatible:
+    enum:
+      - kontron,sl28cpld-intc
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  "#interrupt-cells":
+    const: 2
+
+  interrupt-controller: true
+
+required:
+  - compatible
+  - interrupts
+  - "#interrupt-cells"
+  - interrupt-controller
+
+additionalProperties: false
diff --git a/Documentation/devicetree/bindings/mfd/kontron,sl28cpld.yaml b/Documentation/devicetree/bindings/mfd/kontron,sl28cpld.yaml
new file mode 100644
index 000000000000..e3a62db678e7
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/kontron,sl28cpld.yaml
@@ -0,0 +1,153 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/kontron,sl28cpld.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Kontron's sl28cpld board management controller

"S128CPLD" ?

still not, its sl28cpld, think of a project/code name, not the product
appended with CPLD.

"Board Management Controller (BMC)" ?

sounds like IPMI, which I wanted to avoid.


+maintainers:
+  - Michael Walle <michael@xxxxxxxx>
+
+description: |
+ The board management controller may contain different IP blocks like + watchdog, fan monitoring, PWM controller, interrupt controller and a
+  GPIO controller.
+
+properties:
+  compatible:
+    const: kontron,sl28cpld-r1

We don't usually code revision numbers in compatible strings.

Is there any way to pull this from the H/W?

No, unfortunately you can't. And I really want to keep that, in case
in the future there are some backwards incompatible changes.

+  reg:
+    description:
+      I2C device address.
+    maxItems: 1
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 0
+
+  "#interrupt-cells":
+    const: 2
+
+  interrupts:
+    maxItems: 1
+
+  interrupt-controller: true
+
+patternProperties:
+  "^gpio(@[0-9a-f]+)?$":
+    $ref: ../gpio/kontron,sl28cpld-gpio.yaml
+
+  "^hwmon(@[0-9a-f]+)?$":
+    $ref: ../hwmon/kontron,sl28cpld-hwmon.yaml
+
+  "^interrupt-controller(@[0-9a-f]+)?$":
+    $ref: ../interrupt-controller/kontron,sl28cpld-intc.yaml
+
+  "^pwm(@[0-9a-f]+)?$":
+    $ref: ../pwm/kontron,sl28cpld-pwm.yaml
+
+  "^watchdog(@[0-9a-f]+)?$":
+    $ref: ../watchdog/kontron,sl28cpld-wdt.yaml
+
+required:
+  - "#address-cells"
+  - "#size-cells"
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        sl28cpld@4a {
+            #address-cells = <1>;
+            #size-cells = <0>;
+            compatible = "kontron,sl28cpld-r1";
+            reg = <0x4a>;

Nit: Could you put the 'reg' and 'compatible' at the top please?

Same for all nodes.

Sure, I've looked at previous examples, but they are not
consistent, but it looked to me if the "#" properties are
listed first.

-michael



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux