Re: [PATCH V2 1/3] arm64: dts: sc7180: Add wakeup support over UART RX

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




On 7/24/2020 9:28 AM, satya priya wrote:
Add the necessary pinctrl and interrupts to make UART
wakeup capable.


Reviewed-by: Akash Asthana <akashast@xxxxxxxxxxxxxx>

Signed-off-by: satya priya <skakit@xxxxxxxxxxxxxx>
---
Changes in V2:
  - As per Matthias's comment added wakeup support for all the UARTs
    of SC7180.

  arch/arm64/boot/dts/qcom/sc7180.dtsi | 98 ++++++++++++++++++++++++++++++------
  1 file changed, 84 insertions(+), 14 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sc7180.dtsi b/arch/arm64/boot/dts/qcom/sc7180.dtsi
index 16df08d..044a4d0 100644
--- a/arch/arm64/boot/dts/qcom/sc7180.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7180.dtsi
@@ -787,9 +787,11 @@
  				reg = <0 0x00880000 0 0x4000>;
  				clock-names = "se";
  				clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>;
-				pinctrl-names = "default";
+				pinctrl-names = "default", "sleep";
  				pinctrl-0 = <&qup_uart0_default>;
-				interrupts = <GIC_SPI 601 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-1 = <&qup_uart0_sleep>;
+				interrupts-extended = <&intc GIC_SPI 601 IRQ_TYPE_LEVEL_HIGH>,
+							<&tlmm 37 IRQ_TYPE_EDGE_FALLING>;
  				power-domains = <&rpmhpd SC7180_CX>;
  				operating-points-v2 = <&qup_opp_table>;
  				interconnects = <&qup_virt MASTER_QUP_CORE_0 &qup_virt SLAVE_QUP_CORE_0>,
@@ -839,9 +841,11 @@
  				reg = <0 0x00884000 0 0x4000>;
  				clock-names = "se";
  				clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>;
-				pinctrl-names = "default";
+				pinctrl-names = "default", "sleep";
  				pinctrl-0 = <&qup_uart1_default>;
-				interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-1 = <&qup_uart1_sleep>;
+				interrupts-extended = <&intc GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>,
+							<&tlmm 3 IRQ_TYPE_EDGE_FALLING>;
  				power-domains = <&rpmhpd SC7180_CX>;
  				operating-points-v2 = <&qup_opp_table>;
  				interconnects = <&qup_virt MASTER_QUP_CORE_0 &qup_virt SLAVE_QUP_CORE_0>,
@@ -925,9 +929,11 @@
  				reg = <0 0x0088c000 0 0x4000>;
  				clock-names = "se";
  				clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>;
-				pinctrl-names = "default";
+				pinctrl-names = "default", "sleep";
  				pinctrl-0 = <&qup_uart3_default>;
-				interrupts = <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-1 = <&qup_uart3_sleep>;
+				interrupts-extended = <&intc GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>,
+							<&tlmm 41 IRQ_TYPE_EDGE_FALLING>;
  				power-domains = <&rpmhpd SC7180_CX>;
  				operating-points-v2 = <&qup_opp_table>;
  				interconnects = <&qup_virt MASTER_QUP_CORE_0 &qup_virt SLAVE_QUP_CORE_0>,
@@ -1011,9 +1017,11 @@
  				reg = <0 0x00894000 0 0x4000>;
  				clock-names = "se";
  				clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>;
-				pinctrl-names = "default";
+				pinctrl-names = "default", "sleep";
  				pinctrl-0 = <&qup_uart5_default>;
-				interrupts = <GIC_SPI 606 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-1 = <&qup_uart5_sleep>;
+				interrupts-extended = <&intc GIC_SPI 606 IRQ_TYPE_LEVEL_HIGH>,
+							<&tlmm 28 IRQ_TYPE_EDGE_FALLING>;
  				power-domains = <&rpmhpd SC7180_CX>;
  				operating-points-v2 = <&qup_opp_table>;
  				interconnects = <&qup_virt MASTER_QUP_CORE_0 &qup_virt SLAVE_QUP_CORE_0>,
@@ -1078,9 +1086,11 @@
  				reg = <0 0x00a80000 0 0x4000>;
  				clock-names = "se";
  				clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>;
-				pinctrl-names = "default";
+				pinctrl-names = "default", "sleep";
  				pinctrl-0 = <&qup_uart6_default>;
-				interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-1 = <&qup_uart6_sleep>;
+				interrupts-extended = <&intc GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>,
+							<&tlmm 62 IRQ_TYPE_EDGE_FALLING>;
  				power-domains = <&rpmhpd SC7180_CX>;
  				operating-points-v2 = <&qup_opp_table>;
  				interconnects = <&qup_virt MASTER_QUP_CORE_1 &qup_virt SLAVE_QUP_CORE_1>,
@@ -1250,9 +1260,11 @@
  				reg = <0 0x00a90000 0 0x4000>;
  				clock-names = "se";
  				clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>;
-				pinctrl-names = "default";
+				pinctrl-names = "default", "sleep";
  				pinctrl-0 = <&qup_uart10_default>;
-				interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-1 = <&qup_uart10_sleep>;
+				interrupts-extended = <&intc GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>,
+							<&tlmm 89 IRQ_TYPE_EDGE_FALLING>;
  				power-domains = <&rpmhpd SC7180_CX>;
  				operating-points-v2 = <&qup_opp_table>;
  				interconnects = <&qup_virt MASTER_QUP_CORE_1 &qup_virt SLAVE_QUP_CORE_1>,
@@ -1302,9 +1314,11 @@
  				reg = <0 0x00a94000 0 0x4000>;
  				clock-names = "se";
  				clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>;
-				pinctrl-names = "default";
+				pinctrl-names = "default", "sleep";
  				pinctrl-0 = <&qup_uart11_default>;
-				interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-1 = <&qup_uart11_sleep>;
+				interrupts-extended = <&intc GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>,
+							<&tlmm 56 IRQ_TYPE_EDGE_FALLING>;
  				power-domains = <&rpmhpd SC7180_CX>;
  				operating-points-v2 = <&qup_opp_table>;
  				interconnects = <&qup_virt MASTER_QUP_CORE_1 &qup_virt SLAVE_QUP_CORE_1>,
@@ -1632,6 +1646,14 @@
  				};
  			};
+ qup_uart0_sleep: qup-uart0-sleep {
+				pinmux {
+					pins = "gpio34", "gpio35",
+					       "gpio36", "gpio37";
+					function = "gpio";
+				};
+			};
+
  			qup_uart1_default: qup-uart1-default {
  				pinmux {
  					pins = "gpio0", "gpio1",
@@ -1640,6 +1662,14 @@
  				};
  			};
+ qup_uart1_sleep: qup-uart1-sleep {
+				pinmux {
+					pins = "gpio0", "gpio1",
+					       "gpio2", "gpio3";
+					function = "gpio";
+				};
+			};
+
  			qup_uart2_default: qup-uart2-default {
  				pinmux {
  					pins = "gpio15", "gpio16";
@@ -1655,6 +1685,14 @@
  				};
  			};
+ qup_uart3_sleep: qup-uart3-sleep {
+				pinmux {
+					pins = "gpio38", "gpio39",
+					       "gpio40", "gpio41";
+					function = "gpio";
+				};
+			};
+
  			qup_uart4_default: qup-uart4-default {
  				pinmux {
  					pins = "gpio115", "gpio116";
@@ -1670,6 +1708,14 @@
  				};
  			};
+ qup_uart5_sleep: qup-uart5-sleep {
+				pinmux {
+					pins = "gpio25", "gpio26",
+					       "gpio27", "gpio28";
+					function = "gpio";
+				};
+			};
+
  			qup_uart6_default: qup-uart6-default {
  				pinmux {
  					pins = "gpio59", "gpio60",
@@ -1678,6 +1724,14 @@
  				};
  			};
+ qup_uart6_sleep: qup-uart6-sleep {
+				pinmux {
+					pins = "gpio59", "gpio60",
+					       "gpio61", "gpio62";
+					function = "gpio";
+				};
+			};
+
  			qup_uart7_default: qup-uart7-default {
  				pinmux {
  					pins = "gpio6", "gpio7";
@@ -1707,6 +1761,14 @@
  				};
  			};
+ qup_uart10_sleep: qup-uart10-sleep {
+				pinmux {
+					pins = "gpio86", "gpio87",
+					       "gpio88", "gpio89";
+					function = "gpio";
+				};
+			};
+
  			qup_uart11_default: qup-uart11-default {
  				pinmux {
  					pins = "gpio53", "gpio54",
@@ -1715,6 +1777,14 @@
  				};
  			};
+ qup_uart11_sleep: qup-uart11-sleep {
+				pinmux {
+					pins = "gpio53", "gpio54",
+					       "gpio55", "gpio56";
+					function = "gpio";
+				};
+			};
+
  			sdc1_on: sdc1-on {
  				pinconf-clk {
  					pins = "sdc1_clk";

--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,\na Linux Foundation Collaborative Project




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux