On Mon, Jul 27, 2020 at 1:08 PM Ramuthevar,Vadivel MuruganX <vadivel.muruganx.ramuthevar@xxxxxxxxxxxxxxx> wrote: > > The USB PHY provides the optimized for low power dissipation while active, idle, or on standby. > Requires minimal external components, a single resistor, for best operation. > Supports 10/5-Gbps high-speed data transmission rates through 3-m USB 3.x cable > --- > v7: > - No Change I guess it's not the correct changelog entry. You moved file to another subsystem, didn't you? > v6: > - No Change > v5: > - As per Felipe and Greg's suggestion usb phy driver reviewed patches > changed the folder from drivers/usb/phy to drivers/phy > - Reviewed-By tag added in commit message > v4: > - Andy's review comments addressed > - drop the excess error debug prints > - error check optimized > - merge the split line to one line > v3: > - Andy's review comments update > - hardcode return value changed to actual return value from the callee > - add error check is fixed according to the above > - correct the assignment in redundant > - combine the split line into one line > v2: > - Address Phillip's review comments > - replace devm_reset_control_get() by devm_reset_control_get_exclusive() > - re-design the assert and deassert fucntion calls as per review comments > - address kbuild bot warnings > - add the comments > v1: > - initial version > > --- > dt-bindings: usb: Add USB PHY support for Intel LGM SoC > v7: > - Fixed the bot issue: usb-phy@e7e00000: '#phy-cells' is a required property > v6: > - Fixed the bot issue. > - replace node-name by usb-phy@ in example > v5: > - Reviewed-By tag added > v4: > - No Change > v3: > - No Change > v2: > - No Change > v1: > - initial version > > > Ramuthevar Vadivel Murugan (2): > dt-bindings: phy: Add USB PHY support for Intel LGM SoC > phy: Add USB3 PHY support for Intel LGM SoC > > .../devicetree/bindings/phy/intel,lgm-usb-phy.yaml | 58 +++++ > drivers/phy/Kconfig | 11 + > drivers/phy/Makefile | 1 + > drivers/phy/phy-lgm-usb.c | 278 +++++++++++++++++++++ > 4 files changed, 348 insertions(+) > create mode 100644 Documentation/devicetree/bindings/phy/intel,lgm-usb-phy.yaml > create mode 100644 drivers/phy/phy-lgm-usb.c > > -- > 2.11.0 > -- With Best Regards, Andy Shevchenko
