Initial introduction of AMD EthanolX platform equipped with an
Aspeed ast2500 BMC manufactured by AMD.
AMD EthanolX platform is an AMD customer reference board with an
Aspeed ast2500 BMC manufactured by AMD.
This adds AMD EthanolX device tree file including the flash layout
used by EthanolX BMC machines.
This also adds an entry of AMD EthanolX device tree file in Makefile.
Signed-off-by: Supreeth Venkatesh <supreeth.venkatesh@xxxxxxx>
---
Changes since v2:
* Removed incorrect I2C0 and I2C1 Reg addresses
Changes since v1:
* Addressed review comment regarding SPDX License Identifier
* Added I2c0 and I2c1 which cater to AMD's APML Interface
---
arch/arm/boot/dts/Makefile | 1 +
arch/arm/boot/dts/aspeed-bmc-amd-ethanolx.dts | 219 ++++++++++++++++++
2 files changed, 220 insertions(+)
create mode 100644 arch/arm/boot/dts/aspeed-bmc-amd-ethanolx.dts
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index d6dfdf73e66b..55ed881d2ebc 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -1281,6 +1281,7 @@ dtb-$(CONFIG_ARCH_ZX) += zx296702-ad1.dtb
dtb-$(CONFIG_ARCH_ASPEED) += \
aspeed-ast2500-evb.dtb \
aspeed-ast2600-evb.dtb \
+ aspeed-bmc-amd-ethanolx.dtb \
aspeed-bmc-arm-centriq2400-rep.dtb \
aspeed-bmc-arm-stardragon4800-rep2.dtb \
aspeed-bmc-facebook-cmm.dtb \
diff --git a/arch/arm/boot/dts/aspeed-bmc-amd-ethanolx.dts b/arch/arm/boot/dts/aspeed-bmc-amd-ethanolx.dts
new file mode 100644
index 000000000000..60ba86f3e5bc
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed-bmc-amd-ethanolx.dts
@@ -0,0 +1,219 @@
+// SPDX-License-Identifier: GPL-2.0
+// Copyright (c) 2020 AMD Inc.
+// Author: Supreeth Venkatesh <supreeth.venkatesh@xxxxxxx>
+/dts-v1/;
+
+#include "aspeed-g5.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
+
+/ {
+ model = "AMD EthanolX BMC";
+ compatible = "amd,ethanolx-bmc", "aspeed,ast2500";
+
+ memory@80000000 {
+ reg = <0x80000000 0x20000000>;
+ };
+ aliases {
+ serial0 = &uart1;
+ serial4 = &uart5;
+ };
+ chosen {
+ stdout-path = &uart5;
+ bootargs = "console=ttyS4,115200 earlyprintk";
+ };
+ leds {
+ compatible = "gpio-leds";
+
+ fault {
+ gpios = <&gpio ASPEED_GPIO(A, 2) GPIO_ACTIVE_LOW>;
+ };
+
+ identify {
+ gpios = <&gpio ASPEED_GPIO(A, 3) GPIO_ACTIVE_LOW>;
+ };
+ };
+ iio-hwmon {
+ compatible = "iio-hwmon";
+ io-channels = <&adc 0>, <&adc 1>, <&adc 2>, <&adc 3>, <&adc 4>;
+ };
+};
+
+&fmc {
+ status = "okay";
+ flash@0 {
+ status = "okay";
+ m25p,fast-read;
+ #include "openbmc-flash-layout.dtsi"
+ };
+};
+
+
+&mac0 {
+ status = "okay";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_rmii1_default>;
+ clocks = <&syscon ASPEED_CLK_GATE_MAC1CLK>,
+ <&syscon ASPEED_CLK_MAC1RCLK>;
+ clock-names = "MACCLK", "RCLK";
+};
+
+&uart1 {
+ //Host Console
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_txd1_default
+ &pinctrl_rxd1_default>;
+};
+
+&uart5 {
+ //BMC Console
+ status = "okay";
+};
+
+&adc {
+ status = "okay";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_adc0_default
+ &pinctrl_adc1_default
+ &pinctrl_adc2_default
+ &pinctrl_adc3_default
+ &pinctrl_adc4_default>;
+};
+
+//APML for P0
+&i2c0 {
+ status = "okay";
+};
+
+//APML for P1
+&i2c1 {
+ status = "okay";
+};
+
+// Thermal Sensors
+&i2c7 {
+ status = "okay";
+
+ lm75a@48 {
+ compatible = "national,lm75a";
+ reg = <0x48>;
+ };
+
+ lm75a@49 {
+ compatible = "national,lm75a";
+ reg = <0x49>;
+ };
+
+ lm75a@4a {
+ compatible = "national,lm75a";
+ reg = <0x4a>;
+ };
+
+ lm75a@4b {
+ compatible = "national,lm75a";
+ reg = <0x4b>;
+ };
+
+ lm75a@4c {
+ compatible = "national,lm75a";
+ reg = <0x4c>;
+ };
+
+ lm75a@4d {
+ compatible = "national,lm75a";
+ reg = <0x4d>;
+ };
+
+ lm75a@4e {
+ compatible = "national,lm75a";
+ reg = <0x4e>;
+ };
+
+ lm75a@4f {
+ compatible = "national,lm75a";
+ reg = <0x4f>;
+ };
+};
+
+&kcs1 {
+ status = "okay";
+ kcs_addr = <0x60>;
+};
+
+&kcs2 {
+ status = "okay";
+ kcs_addr = <0x62>;
+};
+
+&kcs4 {
+ status = "okay";
+ kcs_addr = <0x97DE>;
+};
+
+&lpc_snoop {
+ status = "okay";
+ snoop-ports = <0x80>;
+};
+
+&lpc_ctrl {
+ //Enable lpc clock
+ status = "okay";
+};
+
+&pwm_tacho {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm0_default
+ &pinctrl_pwm1_default
+ &pinctrl_pwm2_default
+ &pinctrl_pwm3_default
+ &pinctrl_pwm4_default
+ &pinctrl_pwm5_default
+ &pinctrl_pwm6_default
+ &pinctrl_pwm7_default>;
+
+ fan@0 {
+ reg = <0x00>;
+ aspeed,fan-tach-ch = /bits/ 8 <0x00>;
+ };
+
+ fan@1 {
+ reg = <0x01>;
+ aspeed,fan-tach-ch = /bits/ 8 <0x01>;
+ };
+
+ fan@2 {
+ reg = <0x02>;
+ aspeed,fan-tach-ch = /bits/ 8 <0x02>;
+ };
+
+ fan@3 {
+ reg = <0x03>;
+ aspeed,fan-tach-ch = /bits/ 8 <0x03>;
+ };
+
+ fan@4 {
+ reg = <0x04>;
+ aspeed,fan-tach-ch = /bits/ 8 <0x04>;
+ };
+
+ fan@5 {
+ reg = <0x05>;
+ aspeed,fan-tach-ch = /bits/ 8 <0x05>;
+ };
+
+ fan@6 {
+ reg = <0x06>;
+ aspeed,fan-tach-ch = /bits/ 8 <0x06>;
+ };
+
+ fan@7 {
+ reg = <0x07>;
+ aspeed,fan-tach-ch = /bits/ 8 <0x07>;
+ };
+};
+
+
+
--
2.17.1
