Use the new macb bindings and add an mdio sub-node to contain all the
phy nodes.
Signed-off-by: Codrin Ciubotariu <codrin.ciubotariu@xxxxxxxxxxxxx>
Reviewed-by: Florian Fainelli <f.fainelli@xxxxxxxxx>
---
Changes in v3:
- added tag from Florian
Changes in v2:
- none
arch/arm/boot/dts/at91-sama5d3_xplained.dts | 16 ++++++++++++----
1 file changed, 12 insertions(+), 4 deletions(-)
diff --git a/arch/arm/boot/dts/at91-sama5d3_xplained.dts b/arch/arm/boot/dts/at91-sama5d3_xplained.dts
index 61f068a7b362..25d2646ce4cb 100644
--- a/arch/arm/boot/dts/at91-sama5d3_xplained.dts
+++ b/arch/arm/boot/dts/at91-sama5d3_xplained.dts
@@ -133,8 +133,12 @@ macb0: ethernet@f0028000 {
#size-cells = <0>;
status = "okay";
- ethernet-phy@7 {
- reg = <0x7>;
+ mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ ethernet-phy@7 {
+ reg = <0x7>;
+ };
};
};
@@ -200,8 +204,12 @@ macb1: ethernet@f802c000 {
#size-cells = <0>;
status = "okay";
- ethernet-phy@1 {
- reg = <0x1>;
+ mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ ethernet-phy@1 {
+ reg = <0x1>;
+ };
};
};
--
2.25.1
