Change to XCH mode even in dma mode, please refer to the below errata: https://www.nxp.com/docs/en/errata/IMX6DQCE.pdf Signed-off-by: Robin Gong <yibin.gong@xxxxxxx> Acked-by: Mark Brown <broonie@xxxxxxxxxx> --- drivers/spi/spi-imx.c | 10 +++------- 1 file changed, 3 insertions(+), 7 deletions(-) diff --git a/drivers/spi/spi-imx.c b/drivers/spi/spi-imx.c index 2b8d339..873be5e 100644 --- a/drivers/spi/spi-imx.c +++ b/drivers/spi/spi-imx.c @@ -591,8 +591,8 @@ static int mx51_ecspi_prepare_transfer(struct spi_imx_data *spi_imx, ctrl |= mx51_ecspi_clkdiv(spi_imx, t->speed_hz, &clk); spi_imx->spi_bus_clk = clk; - if (spi_imx->usedma) - ctrl |= MX51_ECSPI_CTRL_SMC; + /* ERR009165: work in XHC mode as PIO */ + ctrl &= ~MX51_ECSPI_CTRL_SMC; writel(ctrl, spi_imx->base + MX51_ECSPI_CTRL); @@ -623,7 +623,7 @@ static void mx51_setup_wml(struct spi_imx_data *spi_imx) * and enable DMA request. */ writel(MX51_ECSPI_DMA_RX_WML(spi_imx->wml - 1) | - MX51_ECSPI_DMA_TX_WML(spi_imx->wml) | + MX51_ECSPI_DMA_TX_WML(0) | MX51_ECSPI_DMA_RXT_WML(spi_imx->wml) | MX51_ECSPI_DMA_TEDEN | MX51_ECSPI_DMA_RXDEN | MX51_ECSPI_DMA_RXTDEN, spi_imx->base + MX51_ECSPI_DMA); @@ -1273,10 +1273,6 @@ static int spi_imx_sdma_init(struct device *dev, struct spi_imx_data *spi_imx, { int ret; - /* use pio mode for i.mx6dl chip TKT238285 */ - if (of_machine_is_compatible("fsl,imx6dl")) - return 0; - spi_imx->wml = spi_imx->devtype_data->fifo_size / 2; /* Prepare for TX DMA: */ -- 2.7.4
