Seville is a DSA switch that is embedded inside the T1040 SoC, and supported by the mscc_seville DSA driver. The driver has been accepted this release cycle and is currently available in net-next (and therefore, in linux-next). This series adds this switch to the SoC's dtsi files and to the T1040RDB board file. Vladimir Oltean (4): powerpc: dts: t1040: add bindings for Seville Ethernet switch powerpc: dts: t1040: label the 2 MDIO controllers powerpc: dts: t1040rdb: put SGMII PHY under &mdio0 label powerpc: dts: t1040rdb: add ports for Seville Ethernet switch arch/powerpc/boot/dts/fsl/t1040rdb.dts | 123 +++++++++++++++++++- arch/powerpc/boot/dts/fsl/t1040si-post.dtsi | 79 ++++++++++++- 2 files changed, 194 insertions(+), 8 deletions(-) -- 2.25.1
