Re: [PATCH v6 1/4] dt-bindings: dmaengine: Add MediaTek Command-Queue DMA controller bindings

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Thu, 2020-07-09 at 14:59 -0600, Rob Herring wrote:
> On Thu, Jul 02, 2020 at 03:06:01PM +0800, EastL Lee wrote:
> > Document the devicetree bindings for MediaTek Command-Queue DMA controller
> > which could be found on MT6779 SoC or other similar Mediatek SoCs.
> > 
> > Signed-off-by: EastL Lee <EastL.Lee@xxxxxxxxxxxx>
> > ---
> >  .../devicetree/bindings/dma/mtk-cqdma.yaml         | 113 +++++++++++++++++++++
> >  1 file changed, 113 insertions(+)
> >  create mode 100644 Documentation/devicetree/bindings/dma/mtk-cqdma.yaml
> > 
> > diff --git a/Documentation/devicetree/bindings/dma/mtk-cqdma.yaml b/Documentation/devicetree/bindings/dma/mtk-cqdma.yaml
> > new file mode 100644
> > index 0000000..83ed742
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/dma/mtk-cqdma.yaml
> > @@ -0,0 +1,113 @@
> > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> > +%YAML 1.2
> > +---
> > +$id: https://urldefense.com/v3/__http://devicetree.org/schemas/dma/mtk-cqdma.yaml*__;Iw!!CTRNKA9wMg0ARbw!1P_if3RiZOVpzN8n4EQI0IxZq0d07UksSgeHYA0h6HLylU9l4pu2eggq7eeVsF2H$ 
> > +$schema: https://urldefense.com/v3/__http://devicetree.org/meta-schemas/core.yaml*__;Iw!!CTRNKA9wMg0ARbw!1P_if3RiZOVpzN8n4EQI0IxZq0d07UksSgeHYA0h6HLylU9l4pu2eggq7ZMPow23$ 
> > +
> > +title: MediaTek Command-Queue DMA controller Device Tree Binding
> > +
> > +maintainers:
> > +  - EastL Lee <EastL.Lee@xxxxxxxxxxxx>
> > +
> > +description:
> > +  MediaTek Command-Queue DMA controller (CQDMA) on Mediatek SoC
> > +  is dedicated to memory-to-memory transfer through queue based
> > +  descriptor management.
> > +
> > +allOf:
> > +  - $ref: "dma-controller.yaml#"
> > +
> > +properties:
> > +  "#dma-cells":
> > +    minimum: 1
> > +    maximum: 255
> > +    description:
> > +      Used to provide DMA controller specific information.
> 
> No, for a specific binding like this, it should be 1 defined value.
OK.I'll fix it to const 1
> 
> > +
> > +  compatible:
> > +    oneOf:
> > +      - const: mediatek,mt6765-cqdma
> > +      - const: mediatek,mt6779-cqdma
> > +
> > +  reg:
> > +    minItems: 1
> > +    maxItems: 5
> > +    description:
> > +        A base address of MediaTek Command-Queue DMA controller,
> > +        a channel will have a set of base address.
> > +
> > +  interrupts:
> > +    minItems: 1
> > +    maxItems: 5
> > +    description:
> > +        A interrupt number of MediaTek Command-Queue DMA controller,
> > +        one interrupt number per dma-channels.
> > +
> > +  clocks:
> > +    maxItems: 1
> > +
> > +  clock-names:
> > +    const: cqdma
> > +
> > +  dma-channel-mask:
> > +    $ref: /schemas/types.yaml#definitions/uint32
> 
> Alreay has a type, don't redefine it here.
OK
> 
> > +    description:
> > +       For DMA capability, We will know the addressing capability of
> > +       MediaTek Command-Queue DMA controller through dma-channel-mask.
> 
> This sounds like the kernel's DMA masks which is not what this property 
> is.
Yes, this is for kernel's DMA mask.
Do I need to declare this member again?
> 
> > +    items:
> > +      minItems: 1
> > +      maxItems: 63
> 
> An array of 63 elements?
> 
> I think you want:
> 
> minimum: 1
> maximum: 63
> 
> Or:
> 
> enum: [ 1, 3, 7, 0xf, 0x1f, 0x3f ]
> 
> (Though if this works, then just 'dma-channels' is enough.)
> 
> > +
> > +  dma-channels:
> > +    $ref: /schemas/types.yaml#definitions/uint32
> > +    description:
> > +      Number of DMA channels supported by MediaTek Command-Queue DMA
> > +      controller, support up to five.
> 
> Is it 5 or 6 channels? You're off by one somewhere.
Currently chip CQDMA only has three channels at most, I'll fix it to
maxnum 3
> > +    items:
> > +      minItems: 1
> > +      maxItems: 5
> > +
> > +  dma-requests:
> > +    $ref: /schemas/types.yaml#definitions/uint32
> > +    description:
> > +      Number of DMA request (virtual channel) supported by MediaTek
> > +      Command-Queue DMA controller, support up to 32.
> > +    items:
> > +      minItems: 1
> > +      maxItems: 32
> 
> You are describing how many elements in an array and this is a scalar.
OK I;ll fix to minnum & maxnum
> 
> > +
> > +required:
> > +  - "#dma-cells"
> > +  - compatible
> > +  - reg
> > +  - interrupts
> > +  - clocks
> > +  - clock-names
> > +  - dma-channel-mask
> > +  - dma-channels
> > +  - dma-requests
> > +
> > +additionalProperties: false
> > +
> > +examples:
> > +  - |
> > +    #include <dt-bindings/interrupt-controller/irq.h>
> > +    #include <dt-bindings/interrupt-controller/arm-gic.h>
> > +    #include <dt-bindings/clock/mt6779-clk.h>
> > +    cqdma: dma-controller@10212000 {
> > +        compatible = "mediatek,mt6779-cqdma";
> > +        reg = <0x10212000 0x80>,
> > +            <0x10212080 0x80>,
> > +            <0x10212100 0x80>;
> > +        interrupts = <GIC_SPI 139 IRQ_TYPE_LEVEL_LOW>,
> > +            <GIC_SPI 140 IRQ_TYPE_LEVEL_LOW>,
> > +            <GIC_SPI 141 IRQ_TYPE_LEVEL_LOW>;
> > +        clocks = <&infracfg_ao CLK_INFRA_CQ_DMA>;
> > +        clock-names = "cqdma";
> > +        dma-channel-mask = <63>;
> > +        dma-channels = <3>;
> > +        dma-requests = <32>;
> > +        #dma-cells = <1>;
> > +    };
> > +
> > +...
> > -- 
> > 1.9.1





[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux