The ID-based GPIO API pushes handling of GPIO polarity to drivers.
Simplify the driver by switching to the descriptor-based GPIO API.
This also fixes a mismatch between the pca954x DT bindings that document
a "reset-gpios" property and the driver that requests a "reset-gpio"
property.
Signed-off-by: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
---
drivers/i2c/muxes/i2c-mux-pca954x.c | 21 +++++----------------
1 file changed, 5 insertions(+), 16 deletions(-)
diff --git a/drivers/i2c/muxes/i2c-mux-pca954x.c b/drivers/i2c/muxes/i2c-mux-pca954x.c
index 550bd36..c2c443f 100644
--- a/drivers/i2c/muxes/i2c-mux-pca954x.c
+++ b/drivers/i2c/muxes/i2c-mux-pca954x.c
@@ -186,7 +186,7 @@ static int pca954x_probe(struct i2c_client *client,
{
struct i2c_adapter *adap = to_i2c_adapter(client->dev.parent);
struct pca954x_platform_data *pdata = dev_get_platdata(&client->dev);
- struct device_node *np = client->dev.of_node;
+ struct gpio_desc *gpio;
int num, force, class;
struct pca954x *data;
int ret;
@@ -200,21 +200,10 @@ static int pca954x_probe(struct i2c_client *client,
i2c_set_clientdata(client, data);
- if (IS_ENABLED(CONFIG_OF) && np) {
- enum of_gpio_flags flags;
- int gpio;
-
- /* Get the mux out of reset if a reset GPIO is specified. */
- gpio = of_get_named_gpio_flags(np, "reset-gpio", 0, &flags);
- if (gpio_is_valid(gpio)) {
- ret = devm_gpio_request_one(&client->dev, gpio,
- flags & OF_GPIO_ACTIVE_LOW ?
- GPIOF_OUT_INIT_HIGH : GPIOF_OUT_INIT_LOW,
- "pca954x reset");
- if (ret < 0)
- return ret;
- }
- }
+ /* Get the mux out of reset if a reset GPIO is specified. */
+ gpio = devm_gpiod_get(&client->dev, "reset");
+ if (!IS_ERR(gpio))
+ gpiod_direction_output(gpio, 0);
/* Write the mux register at addr to verify
* that the mux is in fact present. This also
--
Regards,
Laurent Pinchart
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
