Re: [PATCH v2 2/2] ASoC: qcom: sc7180: Add machine driver for sound card registration

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Tue, Jul 21, 2020 at 6:44 PM Cheng-Yi Chiang <cychiang@xxxxxxxxxxxx> wrote:
> diff --git a/sound/soc/qcom/sc7180.c b/sound/soc/qcom/sc7180.c
> new file mode 100644
> index 000000000000..3beb2b129d01
> --- /dev/null
> +++ b/sound/soc/qcom/sc7180.c
> @@ -0,0 +1,380 @@
> +// SPDX-License-Identifier: GPL-2.0-only
> +//
> +//Copyright (c) 2020, The Linux Foundation. All rights reserved.
> +//
> +//sc7180.c -- ALSA SoC Machine driver for SC7180
Insert an extra space between // and text to make it look better.

> +static int sc7180_headset_init(struct snd_soc_component *component);
> +
> +static struct snd_soc_aux_dev sc7180_headset_dev = {
> +       .dlc = COMP_EMPTY(),
> +       .init = sc7180_headset_init,
> +};
Move definition of sc7180_headset_dev after sc7180_headset_init( ) so
that you don't need forward declaration of sc7180_headset_init( ).

> +static unsigned int primary_dai_fmt = SND_SOC_DAIFMT_CBS_CFS |
> +                                     SND_SOC_DAIFMT_NB_NF |
> +                                     SND_SOC_DAIFMT_I2S;
> +
> +static int sc7180_snd_startup(struct snd_pcm_substream *substream)
> +{
> +       struct snd_soc_pcm_runtime *rtd = substream->private_data;
> +       struct snd_soc_card *card = rtd->card;
> +       struct sc7180_snd_data *data = snd_soc_card_get_drvdata(card);
> +       struct snd_soc_dai *cpu_dai = asoc_rtd_to_cpu(rtd, 0);
> +       struct snd_soc_dai *codec_dai = asoc_rtd_to_codec(rtd, 0);
> +       int ret;
> +
> +       switch (cpu_dai->id) {
> +       case MI2S_PRIMARY:
> +               if (++data->pri_mi2s_clk_count == 1) {
> +                       snd_soc_dai_set_sysclk(cpu_dai,
> +                                              LPASS_MCLK0,
> +                                              DEFAULT_MCLK_RATE,
> +                                              SNDRV_PCM_STREAM_PLAYBACK);
> +               }
> +               snd_soc_dai_set_fmt(codec_dai, primary_dai_fmt);
My comment on the previous thread may mislead.  My original intent:
move the DAIFMT setting to DAI link->dai_fmt in sc7180_parse_of( ).

If you need to keep it as is: inline the SND_SOC_DAIFMT_* into
snd_soc_dai_set_fmt( ) (i.e. eliminate primary_dai_fmt).

> +static int sc7180_parse_of(struct snd_soc_card *card)
> +{
> +       struct device_node *np;
> +       struct device_node *codec = NULL;
> +       struct device_node *platform = NULL;
The function doesn't use platform.

> +       struct device_node *cpu = NULL;
> +       struct device *dev = card->dev;
> +       struct snd_soc_dai_link *link;
> +       struct of_phandle_args args;
> +       struct snd_soc_dai_link_component *dlc;
> +       int ret, num_links;
> +
> +       ret = snd_soc_of_parse_card_name(card, "model");
> +       if (ret) {
> +               dev_err(dev, "Error parsing card name: %d\n", ret);
> +               return ret;
> +       }
> +
> +       /* DAPM routes */
> +       if (of_property_read_bool(dev->of_node, "audio-routing")) {
> +               ret = snd_soc_of_parse_audio_routing(card,
> +                                                    "audio-routing");
> +               if (ret)
> +                       return ret;
> +       }
> +
> +       /* headset aux dev. */
> +       sc7180_headset_dev.dlc.of_node = of_parse_phandle(
> +                       dev->of_node, "aux-dev", 0);
> +       if (!sc7180_headset_dev.dlc.of_node) {
> +               dev_err(dev,
> +                       "Property 'aux-dev' missing/invalid\n");
> +               return -EINVAL;
> +       }
> +
> +       /* Populate links */
> +       num_links = of_get_child_count(dev->of_node);
Eliminate num_links but use card->num_links directly.

> +
> +       /* Allocate the DAI link array */
> +       card->dai_link = devm_kcalloc(dev, num_links, sizeof(*link),
> +                                     GFP_KERNEL);
> +       if (!card->dai_link)
> +               return -ENOMEM;
> +
> +       card->num_links = num_links;
Ditto, eliminate it.

> +       link = card->dai_link;
> +
Eliminate the blank line to make "link = card->dai_link" and the
following for-loop "a whole thing".

> +       for_each_child_of_node(dev->of_node, np) {
> +               dlc = devm_kzalloc(dev, 2 * sizeof(*dlc), GFP_KERNEL);
> +               if (!dlc)
> +                       return -ENOMEM;
> +
> +               link->cpus      = &dlc[0];
> +               link->platforms = &dlc[1];
> +
> +               link->num_cpus          = 1;
> +               link->num_platforms     = 1;
> +
> +               ret = of_property_read_string(np, "link-name", &link->name);
> +               if (ret) {
> +                       dev_err(card->dev,
> +                               "error getting codec dai_link name\n");
> +                       goto err;
> +               }
> +
> +               link->playback_only = of_property_read_bool(np,
> +                                                           "playback_only");
> +               link->capture_only = of_property_read_bool(np,
> +                                                          "capture_only");
> +
> +               if (link->playback_only && link->capture_only) {
> +                       dev_err(card->dev,
> +                               "getting both playback and capture only\n");
ret = -EINVAL;

> +                       goto err;
> +               }
> +
> +               cpu = of_get_child_by_name(np, "cpu");
> +               codec = of_get_child_by_name(np, "codec");
Move to below.

> +
> +               if (!cpu) {
> +                       dev_err(dev, "%s: Can't find cpu DT node\n",
> +                               link->name);
> +                       ret = -EINVAL;
> +                       goto err;
> +               }
> +
> +               ret = of_parse_phandle_with_args(cpu, "sound-dai",
> +                                                "#sound-dai-cells", 0, &args);
I may overlook it but I failed to find "#sound-dai-cells" in the
dt-binding example.  I think it should be in DTS?

> +               if (ret) {
> +                       dev_err(card->dev, "%s: error getting cpu phandle\n",
> +                               link->name);
> +                       goto err;
> +               }
> +               link->cpus->of_node = args.np;
> +               link->id = args.args[0];
I am not quite sure what it will be.  I guess one of the following
comes from DTS node name.
#define MI2S_PRIMARY 0
#define MI2S_SECONDARY 1

> +
> +               ret = snd_soc_of_get_dai_name(cpu, &link->cpus->dai_name);
> +               if (ret) {
> +                       dev_err(card->dev, "%s: error getting cpu dai name\n",
> +                               link->name);
> +                       goto err;
> +               }
> +

Move "codec = of_get_child_by_name(np, "codec");" to here.
> +               if (codec) {
> +                       ret = snd_soc_of_get_dai_link_codecs(dev, codec, link);
> +                       if (ret < 0) {
> +                               dev_err(card->dev, "%s: codec dai not found\n",
> +                                       link->name);
> +                               goto err;
> +                       }
> +               } else {
> +                       dlc = devm_kzalloc(dev, sizeof(*dlc), GFP_KERNEL);
> +                       if (!dlc)
> +                               return -ENOMEM;
> +
> +                       link->codecs     = dlc;
> +                       link->num_codecs = 1;
> +
> +                       link->codecs->dai_name = "snd-soc-dummy-dai";
> +                       link->codecs->name = "snd-soc-dummy";
> +               }
> +
> +               link->platforms->of_node = link->cpus->of_node;
> +               link->stream_name = link->name;
> +               link->ops = &sc7180_ops;
> +               link++;
> +
> +               of_node_put(cpu);
> +               of_node_put(codec);
cpu = NULL;
codec = NULL;
In case of double of_node_put( ).

> +       }
> +
> +       return 0;
> +err:
> +       of_node_put(np);
I guess you don't need this.

> +       of_node_put(cpu);
> +       of_node_put(codec);
> +       of_node_put(platform);
Eliminate it, not used.

> +static int sc7180_snd_platform_probe(struct platform_device *pdev)
> +{
> +       struct snd_soc_card *card;
> +       struct sc7180_snd_data *data;
> +       struct device *dev = &pdev->dev;
> +       int ret;
> +
> +       card = &sc7180_card;
In this case, inline the initialization while declaration.

> +
> +       /* Allocate the private data */
> +       data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL);
> +       if (!data)
> +               return -ENOMEM;
> +
> +       card->dapm_widgets = sc7180_snd_widgets;
> +       card->num_dapm_widgets = ARRAY_SIZE(sc7180_snd_widgets);
Remove them.

> +       card->dev = dev;
> +       dev_set_drvdata(dev, card);
I guess you don't need this if using devm_snd_soc_register_card(...).

Insert a blank line.
> +       ret = sc7180_parse_of(card);
> +       if (ret) {
> +               dev_err(dev, "Error parsing OF data\n");
> +               return ret;
> +       }
> +
> +       data->card = card;
Looks like data->card is not used.

> +       snd_soc_card_set_drvdata(card, data);
> +
> +       ret = snd_soc_register_card(card);
> +       if (ret) {
> +               dev_err(dev, "Sound card registration failed\n");
> +               return ret;
> +       }
> +       return ret;
Just return devm_snd_soc_register_card(...);

> +static int sc7180_snd_platform_remove(struct platform_device *pdev)
> +{
> +       struct snd_soc_card *card = dev_get_drvdata(&pdev->dev);
> +
> +       snd_soc_unregister_card(card);
> +       return 0;
> +}
Can be removed if using devm_snd_soc_register_card( ).


I didn't go through all the cases.  But it would be better if all "if
(ret < 0)" can be replaced to "if (ret)".



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux