On Thu 2020-07-16 13:19:58, Dan Murphy wrote: > Introduce the LP5036/30/24/18/12/9 RGB LED driver. > The difference in these parts are the number of > LED outputs where the: > > LP5036 can control 36 LEDs > LP5030 can control 30 LEDs > LP5024 can control 24 LEDs > LP5018 can control 18 LEDs > LP5012 can control 12 LEDs > LP5009 can control 9 LEDs > > The device has the ability to group LED output into control banks > so that multiple LED banks can be controlled with the same mixing and > brightness. Inversely the LEDs can also be controlled independently. > > Acked-by: Jacek Anaszewski <jacek.anaszewski@xxxxxxxxx> > Signed-off-by: Dan Murphy <dmurphy@xxxxxx> > +/* > + * struct lp50xx_chip_info - > + * @num_leds: number of LED outputs available on the device > + * @led_brightness0_reg: first brightness register of the device > + * @mix_out0_reg: first color mix register of the device > + * @bank_brt_reg: bank brightness register > + * @bank_mix_reg: color mix register > + * @reset_reg: device reset register > + */ Should have /** if this is kerneldoc. > + init_data.fwnode = child; > + num_colors = 0; > + > + /* There are only 3 LEDs per module otherwise they should be > + * banked which also is presented as 3 LEDs > + */ This is not usual comment style for kernel. (And add . at end of sentence). Best regards, Pavel -- (english) http://www.livejournal.com/~pavelmachek (cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html
Attachment:
signature.asc
Description: Digital signature
