Use the new macb bindings and add an mdio sub-node to contain all the
phy nodes.
Signed-off-by: Codrin Ciubotariu <codrin.ciubotariu@xxxxxxxxxxxxx>
---
arch/arm/boot/dts/at91-sama5d27_som1.dtsi | 16 ++++++++++------
arch/arm/boot/dts/at91-sama5d27_wlsom1.dtsi | 17 ++++++++++-------
arch/arm/boot/dts/at91-sama5d2_ptc_ek.dts | 13 ++++++++-----
arch/arm/boot/dts/at91-sama5d2_xplained.dts | 12 ++++++++----
4 files changed, 36 insertions(+), 22 deletions(-)
diff --git a/arch/arm/boot/dts/at91-sama5d27_som1.dtsi b/arch/arm/boot/dts/at91-sama5d27_som1.dtsi
index b1f994c0ae79..dfcee23dcce0 100644
--- a/arch/arm/boot/dts/at91-sama5d27_som1.dtsi
+++ b/arch/arm/boot/dts/at91-sama5d27_som1.dtsi
@@ -84,12 +84,16 @@ macb0: ethernet@f8008000 {
pinctrl-0 = <&pinctrl_macb0_default>;
phy-mode = "rmii";
- ethernet-phy@0 {
- reg = <0x0>;
- interrupt-parent = <&pioA>;
- interrupts = <PIN_PD31 IRQ_TYPE_LEVEL_LOW>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_macb0_phy_irq>;
+ mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ ethernet-phy@0 {
+ reg = <0x0>;
+ interrupt-parent = <&pioA>;
+ interrupts = <PIN_PD31 IRQ_TYPE_LEVEL_LOW>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_macb0_phy_irq>;
+ };
};
};
diff --git a/arch/arm/boot/dts/at91-sama5d27_wlsom1.dtsi b/arch/arm/boot/dts/at91-sama5d27_wlsom1.dtsi
index a06700e53e4c..9c4dce29d2fe 100644
--- a/arch/arm/boot/dts/at91-sama5d27_wlsom1.dtsi
+++ b/arch/arm/boot/dts/at91-sama5d27_wlsom1.dtsi
@@ -181,13 +181,16 @@ &macb0 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_macb0_default>;
phy-mode = "rmii";
-
- ethernet-phy@0 {
- reg = <0x0>;
- interrupt-parent = <&pioA>;
- interrupts = <PIN_PB24 IRQ_TYPE_LEVEL_LOW>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_macb0_phy_irq>;
+ mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ ethernet-phy@0 {
+ reg = <0x0>;
+ interrupt-parent = <&pioA>;
+ interrupts = <PIN_PB24 IRQ_TYPE_LEVEL_LOW>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_macb0_phy_irq>;
+ };
};
};
diff --git a/arch/arm/boot/dts/at91-sama5d2_ptc_ek.dts b/arch/arm/boot/dts/at91-sama5d2_ptc_ek.dts
index c894c7c788a9..fc3375c43ef6 100644
--- a/arch/arm/boot/dts/at91-sama5d2_ptc_ek.dts
+++ b/arch/arm/boot/dts/at91-sama5d2_ptc_ek.dts
@@ -140,11 +140,14 @@ macb0: ethernet@f8008000 {
pinctrl-0 = <&pinctrl_macb0_default &pinctrl_macb0_phy_irq>;
phy-mode = "rmii";
status = "okay";
-
- ethernet-phy@1 {
- reg = <0x1>;
- interrupt-parent = <&pioA>;
- interrupts = <56 IRQ_TYPE_LEVEL_LOW>;
+ mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ ethernet-phy@1 {
+ reg = <0x1>;
+ interrupt-parent = <&pioA>;
+ interrupts = <56 IRQ_TYPE_LEVEL_LOW>;
+ };
};
};
diff --git a/arch/arm/boot/dts/at91-sama5d2_xplained.dts b/arch/arm/boot/dts/at91-sama5d2_xplained.dts
index a927165ea7c2..a62f475d9d0a 100644
--- a/arch/arm/boot/dts/at91-sama5d2_xplained.dts
+++ b/arch/arm/boot/dts/at91-sama5d2_xplained.dts
@@ -149,10 +149,14 @@ macb0: ethernet@f8008000 {
phy-mode = "rmii";
status = "okay";
- ethernet-phy@1 {
- reg = <0x1>;
- interrupt-parent = <&pioA>;
- interrupts = <PIN_PC9 IRQ_TYPE_LEVEL_LOW>;
+ mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ ethernet-phy@1 {
+ reg = <0x1>;
+ interrupt-parent = <&pioA>;
+ interrupts = <PIN_PC9 IRQ_TYPE_LEVEL_LOW>;
+ };
};
};
--
2.25.1
