Hi Patrick
On 6/16/20 5:33 PM, Patrick Delaunay wrote:
Use tabs where possible and remove multiple blanks lines.
Signed-off-by: Patrick Delaunay <patrick.delaunay@xxxxxx>
---
arch/arm/boot/dts/stm32mp15-pinctrl.dtsi | 9 ++++-----
1 file changed, 4 insertions(+), 5 deletions(-)
Applied on stm32-next.
Thanks.
Alex
diff --git a/arch/arm/boot/dts/stm32mp15-pinctrl.dtsi b/arch/arm/boot/dts/stm32mp15-pinctrl.dtsi
index 7eb858732d6d..7d351757f2f8 100644
--- a/arch/arm/boot/dts/stm32mp15-pinctrl.dtsi
+++ b/arch/arm/boot/dts/stm32mp15-pinctrl.dtsi
@@ -210,8 +210,8 @@
<STM32_PINMUX('E', 2, ANALOG)>, /* ETH_RGMII_TXD3 */
<STM32_PINMUX('B', 11, ANALOG)>, /* ETH_RGMII_TX_CTL */
<STM32_PINMUX('C', 1, ANALOG)>, /* ETH_MDC */
- <STM32_PINMUX('A', 2, ANALOG)>, /* ETH_MDIO */
- <STM32_PINMUX('C', 4, ANALOG)>, /* ETH_RGMII_RXD0 */
+ <STM32_PINMUX('A', 2, ANALOG)>, /* ETH_MDIO */
+ <STM32_PINMUX('C', 4, ANALOG)>, /* ETH_RGMII_RXD0 */
<STM32_PINMUX('C', 5, ANALOG)>, /* ETH_RGMII_RXD1 */
<STM32_PINMUX('H', 6, ANALOG)>, /* ETH_RGMII_RXD2 */
<STM32_PINMUX('H', 7, ANALOG)>, /* ETH_RGMII_RXD3 */
@@ -453,7 +453,7 @@
i2c5_pins_b: i2c5-1 {
pins {
pinmux = <STM32_PINMUX('D', 0, AF4)>, /* I2C5_SCL */
- <STM32_PINMUX('D', 1, AF4)>; /* I2C5_SDA */
+ <STM32_PINMUX('D', 1, AF4)>; /* I2C5_SDA */
bias-disable;
drive-open-drain;
slew-rate = <0>;
@@ -463,7 +463,7 @@
i2c5_sleep_pins_b: i2c5-sleep-1 {
pins {
pinmux = <STM32_PINMUX('D', 0, ANALOG)>, /* I2C5_SCL */
- <STM32_PINMUX('D', 1, ANALOG)>; /* I2C5_SDA */
+ <STM32_PINMUX('D', 1, ANALOG)>; /* I2C5_SDA */
};
};
@@ -1072,7 +1072,6 @@
};
};
-
sai2a_pins_b: sai2a-1 {
pins1 {
pinmux = <STM32_PINMUX('I', 6, AF10)>, /* SAI2_SD_A */
