[PATCH 03/10] arm64: dts: qcom: apq8016-sbc: Define leds outside of soc node

[Stephan Gerhold <stephan@xxxxxxxxxxx>]

The leds node does not use any memory regions of the SoC and should
therefore be declared outside the "soc" node.

Signed-off-by: Stephan Gerhold <stephan@xxxxxxxxxxx>
---
 arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi | 104 +++++++++++-----------
 1 file changed, 52 insertions(+), 52 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi b/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi
index 1155e51c4e4f..47a4ebd86bee 100644
--- a/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi
+++ b/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi
@@ -307,58 +307,6 @@ spi@78b9000 {
 			status = "okay";
 		};
 
-		leds {
-			pinctrl-names = "default";
-			pinctrl-0 = <&msmgpio_leds>,
-				    <&pm8916_gpios_leds>,
-				    <&pm8916_mpps_leds>;
-
-			compatible = "gpio-leds";
-
-			led@1 {
-				label = "apq8016-sbc:green:user1";
-				gpios = <&msmgpio 21 GPIO_ACTIVE_HIGH>;
-				linux,default-trigger = "heartbeat";
-				default-state = "off";
-			};
-
-			led@2 {
-				label = "apq8016-sbc:green:user2";
-				gpios = <&msmgpio 120 GPIO_ACTIVE_HIGH>;
-				linux,default-trigger = "mmc0";
-				default-state = "off";
-			};
-
-			led@3 {
-				label = "apq8016-sbc:green:user3";
-				gpios = <&pm8916_gpios 1 GPIO_ACTIVE_HIGH>;
-				linux,default-trigger = "mmc1";
-				default-state = "off";
-			};
-
-			led@4 {
-				label = "apq8016-sbc:green:user4";
-				gpios = <&pm8916_gpios 2 GPIO_ACTIVE_HIGH>;
-				linux,default-trigger = "none";
-				panic-indicator;
-				default-state = "off";
-			};
-
-			led@5 {
-				label = "apq8016-sbc:yellow:wlan";
-				gpios = <&pm8916_mpps 2 GPIO_ACTIVE_HIGH>;
-				linux,default-trigger = "phy0tx";
-				default-state = "off";
-			};
-
-			led@6 {
-				label = "apq8016-sbc:blue:bt";
-				gpios = <&pm8916_mpps 3 GPIO_ACTIVE_HIGH>;
-				linux,default-trigger = "bluetooth-power";
-				default-state = "off";
-			};
-		};
-
 		sdhci@7824000 {
 			vmmc-supply = <&pm8916_l8>;
 			vqmmc-supply = <&pm8916_l5>;
@@ -563,6 +511,58 @@ button@0 {
 			gpios = <&msmgpio 107 GPIO_ACTIVE_LOW>;
 		};
 	};
+
+	leds {
+		pinctrl-names = "default";
+		pinctrl-0 = <&msmgpio_leds>,
+			    <&pm8916_gpios_leds>,
+			    <&pm8916_mpps_leds>;
+
+		compatible = "gpio-leds";
+
+		led@1 {
+			label = "apq8016-sbc:green:user1";
+			gpios = <&msmgpio 21 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+			default-state = "off";
+		};
+
+		led@2 {
+			label = "apq8016-sbc:green:user2";
+			gpios = <&msmgpio 120 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "mmc0";
+			default-state = "off";
+		};
+
+		led@3 {
+			label = "apq8016-sbc:green:user3";
+			gpios = <&pm8916_gpios 1 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "mmc1";
+			default-state = "off";
+		};
+
+		led@4 {
+			label = "apq8016-sbc:green:user4";
+			gpios = <&pm8916_gpios 2 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "none";
+			panic-indicator;
+			default-state = "off";
+		};
+
+		led@5 {
+			label = "apq8016-sbc:yellow:wlan";
+			gpios = <&pm8916_mpps 2 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "phy0tx";
+			default-state = "off";
+		};
+
+		led@6 {
+			label = "apq8016-sbc:blue:bt";
+			gpios = <&pm8916_mpps 3 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "bluetooth-power";
+			default-state = "off";
+		};
+	};
 };
 
 &camss {
-- 
2.27.0