apq8016-sbc.dtsi overrides several properties that are already the
default in msm8916.dtsi. Remove these to simplify the device tree
a bit.
Signed-off-by: Stephan Gerhold <stephan@xxxxxxxxxxx>
---
arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi | 18 ------------------
1 file changed, 18 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi b/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi
index 194343510dcb..0bec6dac17ad 100644
--- a/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi
+++ b/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi
@@ -387,7 +387,6 @@ usb@78d9000 {
adp-disable;
hnp-disable;
srp-disable;
- dr_mode = "otg";
pinctrl-names = "default", "device";
pinctrl-0 = <&usb_sw_sel_pm &usb_hub_reset_pm>;
pinctrl-1 = <&usb_sw_sel_pm_device &usb_hub_reset_pm_device>;
@@ -405,15 +404,7 @@ lpass@7708000 {
};
mdss@1a00000 {
- status = "okay";
-
- mdp@1a01000 {
- status = "okay";
- };
-
dsi@1a98000 {
- status = "okay";
-
vdda-supply = <&pm8916_l2>;
vddio-supply = <&pm8916_l6>;
@@ -428,16 +419,10 @@ endpoint {
};
dsi-phy@1a98300 {
- status = "okay";
-
vddio-supply = <&pm8916_l6>;
};
};
- lpass_codec: codec{
- status = "okay";
- };
-
/*
Internal Codec
playback - Primary MI2S
@@ -587,8 +572,6 @@ button@0 {
&camss {
status = "ok";
ports {
- #address-cells = <1>;
- #size-cells = <0>;
port@0 {
reg = <0>;
csiphy0_ep: endpoint {
@@ -651,7 +634,6 @@ resin {
};
&wcd_codec {
- status = "okay";
clocks = <&gcc GCC_CODEC_DIGCODEC_CLK>;
clock-names = "mclk";
qcom,mbhc-vthreshold-low = <75 150 237 450 500>;
--
2.27.0
