Re: [PATCH v6 2/2] clocksource: Ingenic: Add support for the Ingenic X1000 OST.

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hello Paul and Daniel,

在 2020/7/18 下午9:12, Paul Cercueil 写道:
Hi Daniel,

Le ven. 17 juil. 2020 à 10:02, Daniel Lezcano <daniel.lezcano@xxxxxxxxxx> a écrit :
On 17/07/2020 08:13, Zhou Yanjie wrote:
 Hi Daniel,

 在 2020/7/17 下午12:20, Daniel Lezcano 写道:
 On 10/07/2020 19:02, 周琰杰 (Zhou Yanjie) wrote:
 X1000 and SoCs after X1000 (such as X1500 and X1830) had a separate
 OST, it no longer belongs to TCU. This driver will register both a
 clocksource and a sched_clock to the system.

 Tested-by: 周正 (Zhou Zheng) <sernia.zhou@xxxxxxxxxxx>
 Co-developed-by: 漆鹏振 (Qi Pengzhen) <aric.pzqi@xxxxxxxxxxx>
 Signed-off-by: 漆鹏振 (Qi Pengzhen) <aric.pzqi@xxxxxxxxxxx>
 Signed-off-by: 周琰杰 (Zhou Yanjie) <zhouyanjie@xxxxxxxxxxxxxx>
 Reviewed-by: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
 ---

 Notes:
      v1->v2:
      Fix compile warnings.
      Reported-by: kernel test robot <lkp@xxxxxxxxx>
           v2->v3:
      No change.
           v3->v4:
      1.Rename "ost" to "sysost"
      1.Remove unrelated changes.
      2.Remove ost_clock_parent enum.
      3.Remove ost->percpu_timer_channel/ost->global_timer_channel.
      4.Set up independent .recalc_rate/.set_rate for percpu/global
 timer.
      5.No longer call functions in variable declarations.
           v4->v5:
      Use "of_io_request_and_map()" instead "of_iomap()".
      Suggested-by: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
           v5->v6:
      No change.

   drivers/clocksource/Kconfig          |  11 +
   drivers/clocksource/Makefile         |   1 +
   drivers/clocksource/ingenic-sysost.c | 539
 +++++++++++++++++++++++++++++++++++
   3 files changed, 551 insertions(+)
   create mode 100644 drivers/clocksource/ingenic-sysost.c

 diff --git a/drivers/clocksource/Kconfig b/drivers/clocksource/Kconfig
 index 91418381fcd4..1bca8b8fb30f 100644
 --- a/drivers/clocksource/Kconfig
 +++ b/drivers/clocksource/Kconfig
 @@ -696,6 +696,17 @@ config INGENIC_TIMER
       help
         Support for the timer/counter unit of the Ingenic JZ SoCs.
   +config INGENIC_SYSOST
 +    bool "Clocksource/timer using the SYSOST in Ingenic X SoCs"
 We usually use silent options and let the platform's Kconfig enable it.
 We show up the option only when COMPILE_TEST is enabled.

 Is there a reason to do it differently?


 Do you mean

 bool "Clocksource/timer using the SYSOST in Ingenic X SoCs"

 or

 default MACH_INGENIC ?

Both, no default here.

eg.

bool "Clocksource/timer using the SYSOST in Ingenic X SoCs" if COMPILE_TEST

and

in arch/mips/Kconfig in the config MACH_INGENIC section :

...
select INGENIC_SYSOST
...

Disagreed. That's not how we do things on MIPS. Selecting MACH_INGENIC means "this kernel will support Ingenic SoCs", but not that it will only support these. Hence the depends on MIPS / default MACH_INGENIC.

As for the select INGENIC_SYSOST, this driver only applies to a few SoCs, I certainly don't want it to be force-enabled. I don't even wait it to be force-enabled on X1000, since it is optional there too.

Cheers,
-Paul


If we still need to keep the "default MACH_INGENIC", then Daniel can directly apply the v6 version.

If we need to use the silent options, maybe we can enable them separately according to MACH_JZ4740/MACH_JZ4770/MACH_JZ4780/MACH_X1000/MACH_X1830.

In fact, I think X1000 and X1830 need to enable this driver in most cases, because the current test has found that use TCU to provide clocksource and clockevent will cause data loss/error when transmitting data through spi or ethernet. And these errors no longer appear after using OST.

Thanks and best regards!




 This driver has some origins from "INGENIC_TIMER" driver and
 "INGENIC_OST" driver.
 Early Ingenic processors used TCU (timer/counter unit, has 6 or 8
 generic timer channels) to provide clocksource and clockevent (both with
 only 16bit precision). This part of the processor can only use
 "INGENIC_TIMER" driver.

 Later processors provide an independent 32bit or 64bit timer channel
 (still under TCU, known as ost channel, this channel can not generate
 interrupt) to provid higher precision clocksource. The "INGENIC_OST"
 driver is for this channel. These processors can use "INGENIC_TIMER"
 driver, but using "INGENIC_OST" driver to provide higher precision
 clocksource would be a better choice (clockevent still needs to be
 provided by generic timer channel of TCU, and still 16bit precision).

 And the recent processors provide a SYSOST components, it is independent
 from TCU, including a 64bit timer channel for clocksource and a 32bit
 timer channel for clockevent. Although these processors can also use
 "INGENIC_TIMER" driver, but the better choice is completely independent
 use of "INGENIC_SYSOST" driver to provide higher precision clocksource
 and clockevent.

Ok, the rating should do the job then.

Thanks for the explanation.

 You may have already noticed that this independent SYSOST component is
 like an upgraded and streamlined TCU, which only retains one generic
 timer channel that can generate interrupts, upgrade it from 16bit to
 32bit, and then retain the 64bit ost channel. so the driver code and
 Kconfig code of this patch is largely referenced
 "INGENIC_TIMER" driver and "INGENIC_OST" driver.

 Thanks and best regards!

 +    default MACH_INGENIC
 +    depends on MIPS || COMPILE_TEST
 +    depends on COMMON_CLK
 +    select MFD_SYSCON
 +    select TIMER_OF
 +    select IRQ_DOMAIN
 +    help
 +      Support for the SYSOST of the Ingenic X Series SoCs.
 +
 [ ... ]




--
<http://www.linaro.org/> Linaro.org │ Open source software for ARM SoCs

Follow Linaro:  <http://www.facebook.com/pages/Linaro> Facebook |
<http://twitter.com/#!/linaroorg> Twitter |
<http://www.linaro.org/linaro-blog/> Blog




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux