Re: [PATCH V1] arm64: dts: qcom: SD-card GPIO pin set bias-pull up

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Fri 17 Jul 23:34 PDT 2020, Shaik Sajida Bhanu wrote:

> From: Veerabhadrarao Badiganti <vbadigan@xxxxxxxxxxxxxx>
> 
> On some sc7180 based platforms where external pull is not present on cd-gpio,
> this gpio state is getting read as HIGH when sleep config is applied on it.
> This is resulting in SDcard rescan after suspend-resume even though SDcard
> is not present.
> 
> Update cd-gpio sleep config with bais-pull to fix this issue.
> 
> Also include xo clock to sdhc clocks list which will be used
> in calculating MCLK_FREQ field of DLL_CONFIG2 register.
> 

Please split this in two patches; one fixing the card detect bias and
one for adding the xo clock.


This needs Veerabhadrarao's signed-off-by as well (followed by yours).

Regards,
Bjorn

> Signed-off-by: Shaik Sajida Bhanu <sbhanu@xxxxxxxxxxxxxx>
> ---
>  arch/arm64/boot/dts/qcom/sc7180.dtsi | 12 +++++++-----
>  1 file changed, 7 insertions(+), 5 deletions(-)
> 
> diff --git a/arch/arm64/boot/dts/qcom/sc7180.dtsi b/arch/arm64/boot/dts/qcom/sc7180.dtsi
> index d78a066..8034fcc 100644
> --- a/arch/arm64/boot/dts/qcom/sc7180.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sc7180.dtsi
> @@ -682,8 +682,9 @@
>  			interrupt-names = "hc_irq", "pwr_irq";
>  
>  			clocks = <&gcc GCC_SDCC1_APPS_CLK>,
> -					<&gcc GCC_SDCC1_AHB_CLK>;
> -			clock-names = "core", "iface";
> +					<&gcc GCC_SDCC1_AHB_CLK>,
> +					<&xo_board>;
> +			clock-names = "core", "iface", "xo";
>  			interconnects = <&aggre1_noc MASTER_EMMC &mc_virt SLAVE_EBI1>,
>  				<&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_EMMC_CFG>;
>  			interconnect-names = "sdhc-ddr","cpu-sdhc";
> @@ -1819,7 +1820,7 @@
>  
>  				pinconf-sd-cd {
>  					pins = "gpio69";
> -					bias-disable;
> +					bias-pull-up;
>  					drive-strength = <2>;
>  				};
>  			};
> @@ -2481,8 +2482,9 @@
>  			interrupt-names = "hc_irq", "pwr_irq";
>  
>  			clocks = <&gcc GCC_SDCC2_APPS_CLK>,
> -					<&gcc GCC_SDCC2_AHB_CLK>;
> -			clock-names = "core", "iface";
> +					<&gcc GCC_SDCC2_AHB_CLK>,
> +					<&xo_board>;
> +			clock-names = "core", "iface", "xo";
>  
>  			interconnects = <&aggre1_noc MASTER_SDCC_2 &mc_virt SLAVE_EBI1>,
>  				<&gem_noc MASTER_APPSS_PROC &config_noc	SLAVE_SDCC_2>;
> -- 
> QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member 
> of Code Aurora Forum, hosted by The Linux Foundation
> 



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux