Current devices using the W400 dtsi show mmc tuning errors: [12483.917391] mmc0: tuning execution failed: -5 [30535.551221] mmc0: tuning execution failed: -5 [35359.953671] mmc0: tuning execution failed: -5 [35561.875332] mmc0: tuning execution failed: -5 [61733.348709] mmc0: tuning execution failed: -5 Removing "sd-uhs-sdr50" from the SDIO node prevents this. We also add keep-power-in-suspend to the SDIO node and fix an indentation. Signed-off-by: Christian Hewitt <christianshewitt@xxxxxxxxx> --- arch/arm64/boot/dts/amlogic/meson-g12b-w400.dtsi | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-w400.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12b-w400.dtsi index 98b70d216a6f..2802ddbb83ac 100644 --- a/arch/arm64/boot/dts/amlogic/meson-g12b-w400.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-g12b-w400.dtsi @@ -336,9 +336,11 @@ bus-width = <4>; cap-sd-highspeed; - sd-uhs-sdr50; max-frequency = <100000000>; + /* WiFi firmware requires power to be kept while in suspend */ + keep-power-in-suspend; + non-removable; disable-wp; @@ -398,7 +400,7 @@ shutdown-gpios = <&gpio GPIOX_17 GPIO_ACTIVE_HIGH>; max-speed = <2000000>; clocks = <&wifi32k>; - clock-names = "lpo"; + clock-names = "lpo"; }; }; -- 2.17.1
