Re: [PATCH v5 12/13] arm64: dts: freescale: sl28: enable LED support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Pavel,

Am 2020-07-17 10:36, schrieb Pavel Machek:
Hi!

Now that we have support for GPIO lines of the SMARC connector, enable
LED support on the KBox A-230-LS. There are two LEDs without fixed
functions, one is yellow and one is green. Unfortunately, it is just one
multi-color LED, thus while it is possible to enable both at the same
time it is hard to tell the difference between "yellow only" and "yellow
and green".

+		user_yellow {
+			label = "s1914:yellow:user";
+			gpios = <&sl28cpld_gpio0 0 0>;
+		};
+
+		user_green {
+			label = "s1914:green:user";
+			gpios = <&sl28cpld_gpio1 3 0>;
+		};

This is not suitable label for such LEDs... there's zero chance userland will
know what to do with these.

Do they have some kind of "usual" function?

Unfortunately, they do not. I guess the green one could be something like
"application ready" and the yellow one could be an indication that some
fault occurred.

Do you have any suggestions?

-michael



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux