On 14/07/2020 08:55, Frank Lee wrote: > From: Yangtao Li <frank@xxxxxxxxxxxxxxxxx> Do you expect me to pick patches 7,8,9 or ack them ? > v4: > -drop "dt-bindings: pinctrl: sunxi: make gpio banks supplies required" > -fix dcdc1 regulator name > -get rid of underscore in dts node name > -Some trivial things in yaml files > > v3: > -Add pmu and nmi support > -Add read data mask for calibration > -Code style > -Some trivial things in yaml files > > v2: > -Some naming consistency > -Repair email address > -Fix mmc clock > -Don't export system clock > -Fix checkpatch warning > -Drop unneeded pin function, convert to jtag_gpu and i2s_x > > Yangtao Li (16): > dt-bindings: clk: sunxi-ccu: add compatible string for A100 CCU and > R-CCU > clk: sunxi-ng: add support for the Allwinner A100 CCU > dt-bindings: pinctrl: sunxi: Get rid of continual nesting > dt-bindings: pinctrl: sunxi: Add A100 pinctrl bindings > pinctrl: sunxi: add support for the Allwinner A100 pin controller > dt-bindings: nvmem: SID: add binding for A100's SID controller > dt-bindings: thermal: sun8i: Add binding for A100's THS controller > thermal: sun8i: add TEMP_CALIB_MASK for calibration data in > sun50i_h6_ths_calibrate > thermal: sun8i: Add A100's THS controller support > mfd: axp20x: Allow the AXP803 to be probed by I2C > dt-bindings: irq: sun7i-nmi: fix dt-binding for a80 nmi > dt-bindings: irq: sun7i-nmi: Add binding for A100's NMI controller > dt-bindings: i2c: mv64xxx: Add compatible for the A100 i2c node. > arm64: allwinner: A100: add the basical Allwinner A100 DTSI file > dt-bindings: arm: sunxi: Add Allwinner A100 Perf1 Board bindings > arm64: allwinner: A100: add support for Allwinner Perf1 board > > .../devicetree/bindings/arm/sunxi.yaml | 5 + > .../clock/allwinner,sun4i-a10-ccu.yaml | 7 +- > .../bindings/i2c/marvell,mv64xxx-i2c.yaml | 3 + > .../allwinner,sun7i-a20-sc-nmi.yaml | 5 +- > .../nvmem/allwinner,sun4i-a10-sid.yaml | 19 +- > .../pinctrl/allwinner,sun4i-a10-pinctrl.yaml | 139 +- > .../thermal/allwinner,sun8i-a83t-ths.yaml | 6 +- > arch/arm64/boot/dts/allwinner/Makefile | 1 + > .../allwinner/sun50i-a100-allwinner-perf1.dts | 180 +++ > .../arm64/boot/dts/allwinner/sun50i-a100.dtsi | 364 +++++ > drivers/clk/sunxi-ng/Kconfig | 10 + > drivers/clk/sunxi-ng/Makefile | 2 + > drivers/clk/sunxi-ng/ccu-sun50i-a100-r.c | 214 +++ > drivers/clk/sunxi-ng/ccu-sun50i-a100-r.h | 21 + > drivers/clk/sunxi-ng/ccu-sun50i-a100.c | 1276 +++++++++++++++++ > drivers/clk/sunxi-ng/ccu-sun50i-a100.h | 56 + > drivers/mfd/axp20x-i2c.c | 2 + > drivers/pinctrl/sunxi/Kconfig | 10 + > drivers/pinctrl/sunxi/Makefile | 2 + > drivers/pinctrl/sunxi/pinctrl-sun50i-a100-r.c | 105 ++ > drivers/pinctrl/sunxi/pinctrl-sun50i-a100.c | 708 +++++++++ > drivers/thermal/sun8i_thermal.c | 16 +- > include/dt-bindings/clock/sun50i-a100-ccu.h | 116 ++ > include/dt-bindings/clock/sun50i-a100-r-ccu.h | 23 + > include/dt-bindings/reset/sun50i-a100-ccu.h | 68 + > include/dt-bindings/reset/sun50i-a100-r-ccu.h | 18 + > 26 files changed, 3308 insertions(+), 68 deletions(-) > create mode 100644 arch/arm64/boot/dts/allwinner/sun50i-a100-allwinner-perf1.dts > create mode 100644 arch/arm64/boot/dts/allwinner/sun50i-a100.dtsi > create mode 100644 drivers/clk/sunxi-ng/ccu-sun50i-a100-r.c > create mode 100644 drivers/clk/sunxi-ng/ccu-sun50i-a100-r.h > create mode 100644 drivers/clk/sunxi-ng/ccu-sun50i-a100.c > create mode 100644 drivers/clk/sunxi-ng/ccu-sun50i-a100.h > create mode 100644 drivers/pinctrl/sunxi/pinctrl-sun50i-a100-r.c > create mode 100644 drivers/pinctrl/sunxi/pinctrl-sun50i-a100.c > create mode 100644 include/dt-bindings/clock/sun50i-a100-ccu.h > create mode 100644 include/dt-bindings/clock/sun50i-a100-r-ccu.h > create mode 100644 include/dt-bindings/reset/sun50i-a100-ccu.h > create mode 100644 include/dt-bindings/reset/sun50i-a100-r-ccu.h > -- <http://www.linaro.org/> Linaro.org │ Open source software for ARM SoCs Follow Linaro: <http://www.facebook.com/pages/Linaro> Facebook | <http://twitter.com/#!/linaroorg> Twitter | <http://www.linaro.org/linaro-blog/> Blog
