Re: [PATCH] arm64: dts: qcom: sc7180: Add LPASS clock controller nodes

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi,

On Tue, Jul 14, 2020 at 11:56 PM Taniya Das <tdas@xxxxxxxxxxxxxx> wrote:
>
> Update the clock controller nodes for Low power audio subsystem
> functionality.
>
> Signed-off-by: Taniya Das <tdas@xxxxxxxxxxxxxx>
> ---

Somewhere here you should be pointing to the unlanded bindings patch, AKA:

https://lore.kernel.org/r/1594795010-9074-3-git-send-email-tdas@xxxxxxxxxxxxxx

As per usual the fact that are using a new bindings #include file
means Qualcomm maintainers and clock maintainers will need to
coordinate landing and this needs to be pointed out.


>  arch/arm64/boot/dts/qcom/sc7180.dtsi | 22 ++++++++++++++++++++++
>  1 file changed, 22 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/qcom/sc7180.dtsi b/arch/arm64/boot/dts/qcom/sc7180.dtsi
> index 2be81a2..8c30a17 100644
> --- a/arch/arm64/boot/dts/qcom/sc7180.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sc7180.dtsi
> @@ -8,6 +8,7 @@
>  #include <dt-bindings/clock/qcom,dispcc-sc7180.h>
>  #include <dt-bindings/clock/qcom,gcc-sc7180.h>
>  #include <dt-bindings/clock/qcom,gpucc-sc7180.h>
> +#include <dt-bindings/clock/qcom,lpasscorecc-sc7180.h>
>  #include <dt-bindings/clock/qcom,rpmh.h>
>  #include <dt-bindings/clock/qcom,videocc-sc7180.h>
>  #include <dt-bindings/interconnect/qcom,osm-l3.h>
> @@ -2136,6 +2137,27 @@
>                         };
>                 };
>
> +               lpasscc: clock-controller@62d00000 {
> +                       compatible = "qcom,sc7180-lpasscorecc";
> +                       reg = <0 0x62d00000 0 0x50000>,
> +                           <0 0x62780000 0 0x30000>;
> +                       reg-names = "lpass_core_cc", "lpass_audio_cc";
> +                       clocks = <&gcc GCC_LPASS_CFG_NOC_SWAY_CLK>;
> +                       clock-names = "iface";
> +                       power-domains = <&lpass_hm LPASS_CORE_HM_GDSCR>;
> +                       #clock-cells = <1>;
> +                       #power-domain-cells = <1>;
> +               };
> +
> +               lpass_hm: clock-controller@63000000 {
> +                       compatible = "qcom,sc7180-lpasshm";
> +                       reg = <0 0x63000000 0 0x28>;
> +                       clocks = <&gcc GCC_LPASS_CFG_NOC_SWAY_CLK>;
> +                       clock-names = "iface";
> +                       #clock-cells = <1>;
> +                       #power-domain-cells = <1>;
> +               };

Question: would it ever make sense for a board not to need this clock
controller?  I ask because the sdm845 "lpass" clock controller is
"disabled" by default but yours here isn't.  I know sc7180 and sdm845
work pretty differently and perhaps the sdm845's default of "disabled"
was just overkill, but I thought I'd ask.


> +
>                 etm@7040000 {
>                         compatible = "arm,coresight-etm4x", "arm,primecell";
>                         reg = <0 0x07040000 0 0x1000>;

Your sort order is off.  You should be sorting by unit address.  Note
that the "ETM" has an extra 0 before its 7, so you're comparing 63 to
07 and you should be after.

Other than those small things above this patch looks like it matches
the example in the bindings, so as long as Rob / the clock guys are
fine with the bindings then this seems good to go.

-Doug



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux