[PATCH 13/20] arm64: dts: renesas: r8a774e1: Add USB-DMAC and HSUSB device nodes

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Add usb dmac and hsusb device nodes to the RZ/G2H SoC dtsi.

Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@xxxxxxxxxxxxxx>
Reviewed-by: Marian-Cristian Rotariu <marian-cristian.rotariu.rb@xxxxxxxxxxxxxx>
---
 arch/arm64/boot/dts/renesas/r8a774e1.dtsi | 40 ++++++++++++++++++++++-
 1 file changed, 39 insertions(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/renesas/r8a774e1.dtsi b/arch/arm64/boot/dts/renesas/r8a774e1.dtsi
index 431eea1f3b97..c2797f496e9a 100644
--- a/arch/arm64/boot/dts/renesas/r8a774e1.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a774e1.dtsi
@@ -838,10 +838,48 @@
 		};
 
 		hsusb: usb@e6590000 {
+			compatible = "renesas,usbhs-r8a774e1",
+				     "renesas,rcar-gen3-usbhs";
 			reg = <0 0xe6590000 0 0x200>;
+			interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 704>, <&cpg CPG_MOD 703>;
+			dmas = <&usb_dmac0 0>, <&usb_dmac0 1>,
+			       <&usb_dmac1 0>, <&usb_dmac1 1>;
+			dma-names = "ch0", "ch1", "ch2", "ch3";
+			renesas,buswait = <11>;
+			phys = <&usb2_phy0 3>;
+			phy-names = "usb";
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			resets = <&cpg 704>, <&cpg 703>;
 			status = "disabled";
+		};
 
-			/* placeholder */
+		usb_dmac0: dma-controller@e65a0000 {
+			compatible = "renesas,r8a774e1-usb-dmac",
+				     "renesas,usb-dmac";
+			reg = <0 0xe65a0000 0 0x100>;
+			interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "ch0", "ch1";
+			clocks = <&cpg CPG_MOD 330>;
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			resets = <&cpg 330>;
+			#dma-cells = <1>;
+			dma-channels = <2>;
+		};
+
+		usb_dmac1: dma-controller@e65b0000 {
+			compatible = "renesas,r8a774e1-usb-dmac",
+				     "renesas,usb-dmac";
+			reg = <0 0xe65b0000 0 0x100>;
+			interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "ch0", "ch1";
+			clocks = <&cpg CPG_MOD 331>;
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			resets = <&cpg 331>;
+			#dma-cells = <1>;
+			dma-channels = <2>;
 		};
 
 		usb3_phy0: usb-phy@e65ee000 {
-- 
2.17.1




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux