Re: [PATCH] dt-bindings: pci: convert QCOM pci bindings to YAML

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Wed, Jun 24, 2020 at 12:32:04PM +0530, Sivaprakash Murugesan wrote:
> Convert QCOM pci bindings to YAML schema
> 
> Signed-off-by: Sivaprakash Murugesan <sivaprak@xxxxxxxxxxxxxx>
> ---
>  .../devicetree/bindings/pci/qcom,pcie.txt          | 330 ---------------
>  .../devicetree/bindings/pci/qcom,pcie.yaml         | 470 +++++++++++++++++++++
>  2 files changed, 470 insertions(+), 330 deletions(-)
>  delete mode 100644 Documentation/devicetree/bindings/pci/qcom,pcie.txt
>  create mode 100644 Documentation/devicetree/bindings/pci/qcom,pcie.yaml


> diff --git a/Documentation/devicetree/bindings/pci/qcom,pcie.yaml b/Documentation/devicetree/bindings/pci/qcom,pcie.yaml
> new file mode 100644
> index 000000000000..b119ce4711b4
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/pci/qcom,pcie.yaml
> @@ -0,0 +1,470 @@
> +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> +
> +%YAML 1.2
> +---
> +$id: "http://devicetree.org/schemas/pci/qcom,pcie.yaml#";
> +$schema: "http://devicetree.org/meta-schemas/core.yaml#";
> +
> +title: Qualcomm PCI express root complex
> +
> +maintainers:
> +  - Sivaprakash Murugesan <sivaprak@xxxxxxxxxxxxxx>
> +
> +description:
> +  QCOM PCIe controller uses Designware IP with Qualcomm specific hardware
> +  wrappers.
> +

Need to reference pci-bus.yaml.

> +properties:
> +  compatible:
> +    enum:
> +      - qcom,pcie-apq8064
> +      - qcom,pcie-apq8084
> +      - qcom,pcie-ipq4019
> +      - qcom,pcie-ipq8064
> +      - qcom,pcie-ipq8074
> +      - qcom,pcie-msm8996
> +      - qcom,pcie-qcs404
> +      - qcom,pcie-sdm845
> +
> +  reg:
> +    description: Register ranges as listed in the reg-names property
> +    maxItems: 4
> +
> +  reg-names:
> +    items:
> +      - const: dbi
> +      - const: elbi
> +      - const: parf
> +      - const: config
> +

> +  "#size-cells":
> +    const: 2
> +
> +  device_type:
> +    items:
> +      - const: pci
> +
> +  "#address-cells":
> +    const: 3

Drop these, pci-bus.yaml covers them.

> +
> +  ranges:
> +    maxItems: 2
> +
> +  interrupts:
> +    items:
> +      - description: MSI interrupts
> +
> +  interrupt-names:
> +    const: msi
> +
> +  "#interrupt-cells":
> +    const: 1
> +
> +  interrupt-map-mask:
> +    items:
> +      - description: standard PCI properties to define mapping of PCIe
> +                     interface to interrupt numbers.
> +
> +  interrupt-map:
> +    maxItems: 4
> +
> +  clocks:
> +    minItems: 1
> +    maxItems: 7
> +
> +  clock-names:
> +    minItems: 1
> +    maxItems: 7
> +
> +  resets:
> +    minItems: 1
> +    maxItems: 12
> +
> +  reset-names:
> +    minItems: 1
> +    maxItems: 12
> +
> +  power-domains:
> +    items:
> +      - description: phandle to the power domain responsible for collapsing
> +                     and restoring power to peripherals

Just 'maxItems: 1'. No need for generic descriptions.

> +
> +  vdda-supply:
> +    items:
> +      - description: phandle to power supply

*-supply is not an array.

> +
> +  vdda_phy-supply:
> +    items:
> +      - description: phandle to the power supply to PHY
> +
> +  vdda_refclk-supply:
> +    items:
> +      - description: phandle to power supply for ref clock generator
> +
> +  vddpe-3v3-supply:
> +    items:
> +      - description: PCIe endpoint power supply
> +
> +  phys:
> +    items:
> +      - description: phandle to the PHY block

maxItems: 1

> +
> +  phy-names:
> +    const: pciephy
> +
> +  perst-gpios:
> +    description: Endpoint reset signal line

Add 'maxItems: 1' as *-gpios is an array.

> +
> +  bus-range:
> +    description: Range of bus numbers associated with this controller

Can drop.

> +
> +  num-lanes:
> +    const: 1
> +
> +  linux,pci-domain:
> +    description: pci host bridge domain number

Can drop.

> +
> +required:
> +  - compatible
> +  - reg
> +  - reg-names
> +  - device_type
> +  - "#address-cells"
> +  - "#size-cells"
> +  - ranges
> +  - interrupts
> +  - interrupt-names
> +  - "#interrupt-cells"
> +  - interrupt-map-mask
> +  - interrupt-map
> +  - clocks
> +  - clock-names
> +  - resets
> +  - reset-names
> +  - phys
> +  - phy-names

Can drop everything pci-bus.yaml says is required.

> +
> +additionalProperties: false

Will need to be 'unevaluatedProperties: false' with pci-bus.yaml 
referenced.

> +
> +allOf:
> + - if:
> +     properties:
> +       compatible:
> +         contains:
> +           enum:
> +             - qcom,pcie-apq8064
> +   then:
> +     properties:
> +       clocks:
> +         items:
> +           - description: clock for pcie hw block
> +           - description: clock for pcie phy block
> +       clock-names:
> +         items:
> +           - const: core
> +           - const: phy
> +       resets:
> +         items:
> +           - description: AXI reset
> +           - description: AHB reset
> +           - description: POR reset
> +           - description: PCI reset
> +           - description: PHY reset
> +       reset-names:
> +         items:
> +           - const: axi
> +           - const: ahb
> +           - const: por
> +           - const: pci
> +           - const: phy
> + - if:
> +     properties:
> +       compatible:
> +         contains:
> +           enum:
> +             - qcom,pcie-apq8084
> +   then:
> +     properties:
> +       clocks:
> +         items:
> +           - description: AUX clock
> +           - description: Master AXI clock
> +           - description: Slave AXI clock
> +       clock-names:
> +         items:
> +           - const: aux
> +           - const: bus_master
> +           - const: bus_slave
> +       resets:
> +         items:
> +           - description: core reset
> +       reset-names:
> +         items:
> +           - const: core
> + - if:
> +     properties:
> +       compatible:
> +         contains:
> +           enum:
> +             - qcom,pcie-ipq4019
> +   then:
> +     properties:
> +       clocks:
> +         items:
> +           - description: AUX clock
> +           - description: Master AXI clock
> +           - description: Slave AXI clock
> +       clock-names:
> +         items:
> +           - const: aux
> +           - const: master_bus
> +           - const: master_slave
> +       resets:
> +         items:
> +           - description: AXI master reset
> +           - description: AXI slave reset
> +           - description: PCIE pipe reset
> +           - description: AXI vmid reset
> +           - description: AXI XPU reset
> +           - description: parf reset
> +           - description: PHY reset
> +           - description: AXI master sticky reset
> +           - description: PCIE pipe sticky reset
> +           - description: pwr reset
> +           - description: AHB reset
> +           - description: PHY AHB reset
> +       reset-names:
> +         items:
> +           - const: axi_m
> +           - const: axi_s
> +           - const: pipe
> +           - const: axi_m_vmid
> +           - const: axi_s_xpu
> +           - const: parf
> +           - const: phy
> +           - const: axi_m_sticky
> +           - const: pipe_sticky
> +           - const: pwr
> +           - const: ahb
> +           - const: phy_ahb
> + - if:
> +     properties:
> +       compatible:
> +         contains:
> +           enum:
> +             - qcom,pcie-ipq8064
> +   then:
> +     properties:
> +       clocks:
> +         items:
> +           - description: core clock
> +           - description: interface clock
> +           - description: phy clock
> +           - description: Auxilary clock
> +           - description: reference clock
> +       clock-names:
> +         items:
> +           - const: core
> +           - const: iface
> +           - const: phy
> +           - const: aux
> +           - const: ref
> +       resets:
> +         items:
> +           - description: AXI reset
> +           - description: AHB reset
> +           - description: POR reset
> +           - description: PCI reset
> +           - description: PHY reset
> +           - description: External reset
> +       reset-names:
> +         items:
> +           - const: axi
> +           - const: ahb
> +           - const: por
> +           - const: pci
> +           - const: phy
> +           - const: ext
> + - if:
> +     properties:
> +       compatible:
> +         contains:
> +           enum:
> +             - qcom,pcie-ipq8074
> +   then:
> +     properties:
> +       clocks:
> +         items:
> +           - description: sys noc interface clock
> +           - description: AXI master clock
> +           - description: AXI slave clock
> +           - description: AHB clock
> +           - description: Auxilary clock
> +       clock-names:
> +         items:
> +           - const: iface
> +           - const: axi_m
> +           - const: axi_s
> +           - const: ahb
> +           - const: aux
> +       resets:
> +         items:
> +           - description: PIPE reset
> +           - description: PCIe sleep reset
> +           - description: PCIe sticky reset
> +           - description: AXI master reset
> +           - description: AXI slave reset
> +           - description: AHB reset
> +           - description: AXI master sticky reset
> +       reset-names:
> +         items:
> +           - const: pipe
> +           - const: sleep
> +           - const: sticky
> +           - const: axi_m
> +           - const: axi_s
> +           - const: ahb
> +           - const: axi_m_sticky
> + - if:
> +     properties:
> +       compatible:
> +         contains:
> +           enum:
> +             - qcom,pcie-msm8996
> +   then:
> +     properties:
> +       clocks:
> +         items:
> +           - description: PCIe pipe clock
> +           - description: Auxilary clock
> +           - description: AHB config clock
> +           - description: AXI master clock
> +           - description: AXI slave clock
> +       clock-names:
> +         items:
> +           - const: pipe
> +           - const: aux
> +           - const: cfg
> +           - const: bus_master
> +           - const: bus_slave
> + - if:
> +     properties:
> +       compatible:
> +         contains:
> +           enum:
> +             - qcom,pcie-qcs404
> +   then:
> +     properties:
> +       clocks:
> +         items:
> +           - description: interface clock
> +           - description: Auxilary clock
> +           - description: AXI master clock
> +           - description: AXI slave clock
> +       clock-names:
> +         items:
> +           - const: iface
> +           - const: aux
> +           - const: master_bus
> +           - const: slave_bus
> +       resets:
> +         items:
> +           - description: AXI master reset
> +           - description: AXI slave reset
> +           - description: AXI master sticky reset
> +           - description: PCIe pipe sticky reset
> +           - description: power reset
> +           - description: AHB reset
> +       reset-names:
> +         items:
> +           - const: axi_m
> +           - const: axi_s
> +           - const: axi_m_sticky
> +           - const: pipe_sticky
> +           - const: pwr
> +           - const: ahb
> + - if:
> +     properties:
> +       compatible:
> +         contains:
> +           enum:
> +             - qcom,pcie-sdm845
> +   then:
> +     properties:
> +       clocks:
> +         items:
> +           - description: PCIE pipe clock
> +           - description: Auxilary clock
> +           - description: AHB config clock
> +           - description: AXI Master clock
> +           - description: AXI Slave clock
> +           - description: AXI Slave Q2A clock
> +           - description: NOC TBU clock
> +       clock-names:
> +         items:
> +           - const: pipe
> +           - const: aux
> +           - const: cfg
> +           - const: bus_master
> +           - const: bus_slave
> +           - const: slave_q2a
> +           - const: tbu
> +       resets:
> +         items:
> +           - description: PCI reset
> +       reset-names:
> +         items:
> +           - const: pci
> +
> +examples:
> +  - |
> +    #include <dt-bindings/clock/qcom,gcc-qcs404.h>
> +    #include <dt-bindings/interrupt-controller/arm-gic.h>
> +    pcie: pci@10000000 {
> +        compatible = "qcom,pcie-qcs404";
> +        reg =  <0x10000000 0xf1d>,
> +               <0x10000f20 0xa8>,
> +               <0x07780000 0x2000>,
> +               <0x10001000 0x2000>;
> +        reg-names = "dbi", "elbi", "parf", "config";
> +        device_type = "pci";
> +        linux,pci-domain = <0>;
> +        bus-range = <0x00 0xff>;
> +        num-lanes = <1>;
> +        #address-cells = <3>;
> +        #size-cells = <2>;
> +
> +        ranges = <0x01000000 0 0          0x10003000 0 0x00010000>, /* I/O */
> +                 <0x02000000 0 0x10013000 0x10013000 0 0x007ed000>; /* memory */
> +
> +        interrupts = <GIC_SPI 266 IRQ_TYPE_LEVEL_HIGH>;
> +        interrupt-names = "msi";
> +        #interrupt-cells = <1>;
> +        interrupt-map-mask = <0 0 0 0x7>;
> +        interrupt-map = <0 0 0 1 &intc GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
> +                        <0 0 0 2 &intc GIC_SPI 224 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
> +                        <0 0 0 3 &intc GIC_SPI 267 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
> +                        <0 0 0 4 &intc GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
> +        clocks = <&gcc GCC_PCIE_0_CFG_AHB_CLK>,
> +                 <&gcc GCC_PCIE_0_AUX_CLK>,
> +                 <&gcc GCC_PCIE_0_MSTR_AXI_CLK>,
> +                 <&gcc GCC_PCIE_0_SLV_AXI_CLK>;
> +        clock-names = "iface", "aux", "master_bus", "slave_bus";
> +
> +        resets = <&gcc 18>,
> +                 <&gcc 17>,
> +                 <&gcc 15>,
> +                 <&gcc 19>,
> +                 <&gcc GCC_PCIE_0_BCR>,
> +                 <&gcc 16>;
> +        reset-names = "axi_m",
> +                      "axi_s",
> +                      "axi_m_sticky",
> +                      "pipe_sticky",
> +                      "pwr",
> +                      "ahb";
> +
> +        phys = <&pcie_phy>;
> +        phy-names = "pciephy";
> +
> +    };
> -- 
> 2.7.4
> 



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux