On Wed 15 Jul 12:01 PDT 2020, Doug Anderson wrote: > Hi, > > On Sun, Jul 12, 2020 at 9:46 PM Rakesh Pillai <pillair@xxxxxxxxxxxxxx> wrote: > > > > The wlan firmware memory is statically mapped in > > the Trusted Firmware, hence the wlan driver does > > not need to map/unmap this region dynamically. > > > > Hence add the property to indicate the wlan driver > > to not map/unamp the firmware memory region > > dynamically. > > > > Also add the chain1 voltage supply for wlan. > > > > Signed-off-by: Rakesh Pillai <pillair@xxxxxxxxxxxxxx> > > --- > > Changes from v1: > > - Add the wifi mac alias > > > > This patch is created on top of the change by > > Douglas Anderson. > > https://lkml.org/lkml/2020/6/25/817 > > > > Also the dt-bindings for the chain1 voltage supply > > is added by the below patch series: > > https://patchwork.kernel.org/project/linux-wireless/list/?series=309137 > > --- > > arch/arm64/boot/dts/qcom/sc7180-idp.dts | 3 +++ > > 1 file changed, 3 insertions(+) > > > > diff --git a/arch/arm64/boot/dts/qcom/sc7180-idp.dts b/arch/arm64/boot/dts/qcom/sc7180-idp.dts > > index 472f7f4..c042d61 100644 > > --- a/arch/arm64/boot/dts/qcom/sc7180-idp.dts > > +++ b/arch/arm64/boot/dts/qcom/sc7180-idp.dts > > @@ -19,6 +19,7 @@ > > > > aliases { > > bluetooth0 = &bluetooth; > > + wifi0 = &wifi; > > hsuart0 = &uart3; > > serial0 = &uart8; > > Could you alphabetize? > I fixed this up while applying the patch. Thanks, Bjorn > > }; > > @@ -391,10 +392,12 @@ > > > > &wifi { > > status = "okay"; > > + qcom,msa-fixed-perm; > > vdd-0.8-cx-mx-supply = <&vreg_l9a_0p6>; > > vdd-1.8-xo-supply = <&vreg_l1c_1p8>; > > vdd-1.3-rfa-supply = <&vreg_l2c_1p3>; > > vdd-3.3-ch0-supply = <&vreg_l10c_3p3>; > > + vdd-3.3-ch1-supply = <&vreg_l11c_3p3>; > > wifi-firmware { > > iommus = <&apps_smmu 0xc2 0x1>; > > }; > > Other than the alphabetical order: > > Reviewed-by: Douglas Anderson <dianders@xxxxxxxxxxxx>
