Add nodes for the SYS-DMA controllers, SYS-DMAC0 and SYS-DMAC1. These
both share the same device sources, so are wrapped in the shdma-mux
node to allow both to be used.
Cfr. the r8a7790 version by Ben Dooks.
Signed-off-by: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
---
v2:
- No changes
arch/arm/boot/dts/r8a7791.dtsi | 69 ++++++++++++++++++++++++++++++++++++++++++
1 file changed, 69 insertions(+)
diff --git a/arch/arm/boot/dts/r8a7791.dtsi b/arch/arm/boot/dts/r8a7791.dtsi
index e5c35d784ec8..37685ef32ea0 100644
--- a/arch/arm/boot/dts/r8a7791.dtsi
+++ b/arch/arm/boot/dts/r8a7791.dtsi
@@ -11,6 +11,7 @@
*/
#include <dt-bindings/clock/r8a7791-clock.h>
+#include <dt-bindings/dma/r8a7791-dma.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/interrupt-controller/irq.h>
@@ -55,6 +56,74 @@
};
};
+ dma0: dma-mux@0 {
+ compatible = "renesas,shdma-mux";
+ #dma-cells = <2>;
+ dma-channels = <30>;
+ dma-requests = <256>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ sysdma0: dma-controller@e6700020 {
+ compatible = "renesas,shdma-r8a7791";
+ reg = <0 0xe6700020 0 0xffc0>;
+ clocks = <&mstp2_clks R8A7791_CLK_SYS_DMAC0>;
+ dma-channels = <15>;
+ interrupts = <0 197 IRQ_TYPE_LEVEL_HIGH>, /* error */
+ <0 200 IRQ_TYPE_LEVEL_HIGH>, /* ch0 */
+ <0 201 IRQ_TYPE_LEVEL_HIGH>,
+ <0 202 IRQ_TYPE_LEVEL_HIGH>,
+ <0 203 IRQ_TYPE_LEVEL_HIGH>,
+ <0 204 IRQ_TYPE_LEVEL_HIGH>,
+ <0 205 IRQ_TYPE_LEVEL_HIGH>,
+ <0 206 IRQ_TYPE_LEVEL_HIGH>,
+ <0 207 IRQ_TYPE_LEVEL_HIGH>,
+ <0 208 IRQ_TYPE_LEVEL_HIGH>,
+ <0 209 IRQ_TYPE_LEVEL_HIGH>,
+ <0 210 IRQ_TYPE_LEVEL_HIGH>,
+ <0 211 IRQ_TYPE_LEVEL_HIGH>,
+ <0 212 IRQ_TYPE_LEVEL_HIGH>,
+ <0 213 IRQ_TYPE_LEVEL_HIGH>,
+ <0 214 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "error",
+ "ch0", "ch1", "ch2", "ch3",
+ "ch4", "ch5", "ch6", "ch7",
+ "ch8", "ch9", "ch10", "ch11",
+ "ch12", "ch13", "ch14";
+ status = "disabled";
+ };
+
+ sysdma1: dma-controller@e6720020 {
+ compatible = "renesas,shdma-r8a7791";
+ reg = <0 0xe6720020 0 0xffc0>;
+ clocks = <&mstp2_clks R8A7791_CLK_SYS_DMAC1>;
+ dma-channels = <15>;
+ interrupts = <0 220 IRQ_TYPE_LEVEL_HIGH>,
+ <0 216 IRQ_TYPE_LEVEL_HIGH>,
+ <0 217 IRQ_TYPE_LEVEL_HIGH>,
+ <0 218 IRQ_TYPE_LEVEL_HIGH>,
+ <0 219 IRQ_TYPE_LEVEL_HIGH>,
+ <0 308 IRQ_TYPE_LEVEL_HIGH>,
+ <0 309 IRQ_TYPE_LEVEL_HIGH>,
+ <0 310 IRQ_TYPE_LEVEL_HIGH>,
+ <0 311 IRQ_TYPE_LEVEL_HIGH>,
+ <0 312 IRQ_TYPE_LEVEL_HIGH>,
+ <0 313 IRQ_TYPE_LEVEL_HIGH>,
+ <0 314 IRQ_TYPE_LEVEL_HIGH>,
+ <0 315 IRQ_TYPE_LEVEL_HIGH>,
+ <0 316 IRQ_TYPE_LEVEL_HIGH>,
+ <0 317 IRQ_TYPE_LEVEL_HIGH>,
+ <0 318 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "error",
+ "ch0", "ch1", "ch2", "ch3",
+ "ch4", "ch5", "ch6", "ch7",
+ "ch8", "ch9", "ch10", "ch11",
+ "ch12", "ch13", "ch14";
+ status = "disabled";
+ };
+ };
+
gic: interrupt-controller@f1001000 {
compatible = "arm,cortex-a15-gic";
#interrupt-cells = <3>;
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
