Re: [TEGRA194_CPUFREQ PATCH v6 3/3] cpufreq: Add Tegra194 cpufreq driver

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 15/07/2020 14:31, Sumit Gupta wrote:
> Add support for CPU frequency scaling on Tegra194. The frequency
> of each core can be adjusted by writing a clock divisor value to
> a MSR on the core. The range of valid divisors is queried from
> the BPMP.
> 
> Signed-off-by: Mikko Perttunen <mperttunen@xxxxxxxxxx>
> Signed-off-by: Sumit Gupta <sumitg@xxxxxxxxxx>
> ---
>  drivers/cpufreq/Kconfig.arm        |   7 +
>  drivers/cpufreq/Makefile           |   1 +
>  drivers/cpufreq/tegra194-cpufreq.c | 397 +++++++++++++++++++++++++++++++++++++
>  3 files changed, 405 insertions(+)
>  create mode 100644 drivers/cpufreq/tegra194-cpufreq.c
> 
> diff --git a/drivers/cpufreq/Kconfig.arm b/drivers/cpufreq/Kconfig.arm
> index 15c1a12..7e99a46 100644
> --- a/drivers/cpufreq/Kconfig.arm
> +++ b/drivers/cpufreq/Kconfig.arm
> @@ -314,6 +314,13 @@ config ARM_TEGRA186_CPUFREQ
>  	help
>  	  This adds the CPUFreq driver support for Tegra186 SOCs.
>  
> +config ARM_TEGRA194_CPUFREQ
> +	tristate "Tegra194 CPUFreq support"
> +	depends on ARCH_TEGRA_194_SOC && TEGRA_BPMP
> +	default y
> +	help
> +	  This adds CPU frequency driver support for Tegra194 SOCs.
> +
>  config ARM_TI_CPUFREQ
>  	bool "Texas Instruments CPUFreq support"
>  	depends on ARCH_OMAP2PLUS
> diff --git a/drivers/cpufreq/Makefile b/drivers/cpufreq/Makefile
> index f6670c4..66b5563 100644
> --- a/drivers/cpufreq/Makefile
> +++ b/drivers/cpufreq/Makefile
> @@ -83,6 +83,7 @@ obj-$(CONFIG_ARM_TANGO_CPUFREQ)		+= tango-cpufreq.o
>  obj-$(CONFIG_ARM_TEGRA20_CPUFREQ)	+= tegra20-cpufreq.o
>  obj-$(CONFIG_ARM_TEGRA124_CPUFREQ)	+= tegra124-cpufreq.o
>  obj-$(CONFIG_ARM_TEGRA186_CPUFREQ)	+= tegra186-cpufreq.o
> +obj-$(CONFIG_ARM_TEGRA194_CPUFREQ)	+= tegra194-cpufreq.o
>  obj-$(CONFIG_ARM_TI_CPUFREQ)		+= ti-cpufreq.o
>  obj-$(CONFIG_ARM_VEXPRESS_SPC_CPUFREQ)	+= vexpress-spc-cpufreq.o
>  
> diff --git a/drivers/cpufreq/tegra194-cpufreq.c b/drivers/cpufreq/tegra194-cpufreq.c
> new file mode 100644
> index 0000000..b52a5e2
> --- /dev/null
> +++ b/drivers/cpufreq/tegra194-cpufreq.c
> @@ -0,0 +1,397 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Copyright (c) 2020, NVIDIA CORPORATION. All rights reserved
> + */
> +
> +#include <linux/cpu.h>
> +#include <linux/cpufreq.h>
> +#include <linux/delay.h>
> +#include <linux/dma-mapping.h>
> +#include <linux/module.h>
> +#include <linux/of.h>
> +#include <linux/of_platform.h>
> +#include <linux/platform_device.h>
> +#include <linux/slab.h>
> +
> +#include <asm/smp_plat.h>
> +
> +#include <soc/tegra/bpmp.h>
> +#include <soc/tegra/bpmp-abi.h>
> +
> +#define KHZ                     1000
> +#define REF_CLK_MHZ             408 /* 408 MHz */
> +#define US_DELAY                500
> +#define US_DELAY_MIN            2
> +#define CPUFREQ_TBL_STEP_HZ     (50 * KHZ * KHZ)
> +#define MAX_CNT                 ~0U
> +
> +/* cpufreq transisition latency */
> +#define TEGRA_CPUFREQ_TRANSITION_LATENCY (300 * 1000) /* unit in nanoseconds */
> +
> +enum cluster {
> +	CLUSTER0,
> +	CLUSTER1,
> +	CLUSTER2,
> +	CLUSTER3,
> +	MAX_CLUSTERS,
> +};
> +
> +struct tegra194_cpufreq_data {
> +	void __iomem *regs;
> +	size_t num_clusters;
> +	struct cpufreq_frequency_table **tables;
> +};
> +
> +struct tegra_cpu_ctr {
> +	u32 cpu;
> +	u32 delay;
> +	u32 coreclk_cnt, last_coreclk_cnt;
> +	u32 refclk_cnt, last_refclk_cnt;
> +};
> +
> +struct read_counters_work {
> +	struct work_struct work;
> +	struct tegra_cpu_ctr c;
> +};
> +
> +static struct workqueue_struct *read_counters_wq;
> +
> +static enum cluster get_cpu_cluster(u8 cpu)
> +{
> +	return MPIDR_AFFINITY_LEVEL(cpu_logical_map(cpu), 1);
> +}
> +
> +/*
> + * Read per-core Read-only system register NVFREQ_FEEDBACK_EL1.
> + * The register provides frequency feedback information to
> + * determine the average actual frequency a core has run at over
> + * a period of time.
> + *	[31:0] PLLP counter: Counts at fixed frequency (408 MHz)
> + *	[63:32] Core clock counter: counts on every core clock cycle
> + *			where the core is architecturally clocking
> + */
> +static u64 read_freq_feedback(void)
> +{
> +	u64 val = 0;
> +
> +	asm volatile("mrs %0, s3_0_c15_c0_5" : "=r" (val) : );
> +
> +	return val;
> +}
> +
> +static inline u32 map_ndiv_to_freq(struct mrq_cpu_ndiv_limits_response
> +				   *nltbl, u16 ndiv)
> +{
> +	return nltbl->ref_clk_hz / KHZ * ndiv / (nltbl->pdiv * nltbl->mdiv);
> +}
> +
> +static void tegra_read_counters(struct work_struct *work)
> +{
> +	struct read_counters_work *read_counters_work;
> +	struct tegra_cpu_ctr *c;
> +	u64 val;
> +
> +	/*
> +	 * ref_clk_counter(32 bit counter) runs on constant clk,
> +	 * pll_p(408MHz).
> +	 * It will take = 2 ^ 32 / 408 MHz to overflow ref clk counter
> +	 *              = 10526880 usec = 10.527 sec to overflow
> +	 *
> +	 * Like wise core_clk_counter(32 bit counter) runs on core clock.
> +	 * It's synchronized to crab_clk (cpu_crab_clk) which runs at
> +	 * freq of cluster. Assuming max cluster clock ~2000MHz,
> +	 * It will take = 2 ^ 32 / 2000 MHz to overflow core clk counter
> +	 *              = ~2.147 sec to overflow
> +	 */
> +	read_counters_work = container_of(work, struct read_counters_work,
> +					  work);
> +	c = &read_counters_work->c;
> +
> +	val = read_freq_feedback();
> +	c->last_refclk_cnt = lower_32_bits(val);
> +	c->last_coreclk_cnt = upper_32_bits(val);
> +	udelay(c->delay);
> +	val = read_freq_feedback();
> +	c->refclk_cnt = lower_32_bits(val);
> +	c->coreclk_cnt = upper_32_bits(val);
> +}
> +
> +/*
> + * Return instantaneous cpu speed
> + * Instantaneous freq is calculated as -
> + * -Takes sample on every query of getting the freq.
> + *	- Read core and ref clock counters;
> + *	- Delay for X us
> + *	- Read above cycle counters again
> + *	- Calculates freq by subtracting current and previous counters
> + *	  divided by the delay time or eqv. of ref_clk_counter in delta time
> + *	- Return Kcycles/second, freq in KHz
> + *
> + *	delta time period = x sec
> + *			  = delta ref_clk_counter / (408 * 10^6) sec
> + *	freq in Hz = cycles/sec
> + *		   = (delta cycles / x sec
> + *		   = (delta cycles * 408 * 10^6) / delta ref_clk_counter
> + *	in KHz	   = (delta cycles * 408 * 10^3) / delta ref_clk_counter
> + *
> + * @cpu - logical cpu whose freq to be updated
> + * Returns freq in KHz on success, 0 if cpu is offline
> + */
> +static unsigned int tegra194_get_speed_common(u32 cpu, u32 delay)
> +{
> +	struct read_counters_work read_counters_work;
> +	struct tegra_cpu_ctr c;
> +	u32 delta_refcnt;
> +	u32 delta_ccnt;
> +	u32 rate_mhz;
> +
> +	/*
> +	 * udelay() is required to reconstruct cpu frequency over an
> +	 * observation window. Using workqueue to call udelay() with
> +	 * interrupts enabled.
> +	 */
> +	read_counters_work.c.cpu = cpu;
> +	read_counters_work.c.delay = delay;
> +	INIT_WORK_ONSTACK(&read_counters_work.work, tegra_read_counters);
> +	queue_work_on(cpu, read_counters_wq, &read_counters_work.work);
> +	flush_work(&read_counters_work.work);
> +	c = read_counters_work.c;
> +
> +	if (c.coreclk_cnt < c.last_coreclk_cnt)
> +		delta_ccnt = c.coreclk_cnt + (MAX_CNT - c.last_coreclk_cnt);
> +	else
> +		delta_ccnt = c.coreclk_cnt - c.last_coreclk_cnt;
> +	if (!delta_ccnt)
> +		return 0;
> +
> +	/* ref clock is 32 bits */
> +	if (c.refclk_cnt < c.last_refclk_cnt)
> +		delta_refcnt = c.refclk_cnt + (MAX_CNT - c.last_refclk_cnt);
> +	else
> +		delta_refcnt = c.refclk_cnt - c.last_refclk_cnt;
> +	if (!delta_refcnt) {
> +		pr_debug("cpufreq: %d is idle, delta_refcnt: 0\n", cpu);
> +		return 0;
> +	}
> +	rate_mhz = ((unsigned long)(delta_ccnt * REF_CLK_MHZ)) / delta_refcnt;
> +
> +	return (rate_mhz * KHZ); /* in KHz */
> +}
> +
> +static unsigned int tegra194_get_speed(u32 cpu)
> +{
> +	return tegra194_get_speed_common(cpu, US_DELAY);
> +}
> +
> +static unsigned int tegra194_fast_get_speed(u32 cpu)
> +{
> +	return tegra194_get_speed_common(cpu, US_DELAY_MIN);
> +}

Personally, I would not bother with the above function as it is only
used in one place.

> +
> +static int tegra194_cpufreq_init(struct cpufreq_policy *policy)
> +{
> +	struct tegra194_cpufreq_data *data = cpufreq_get_driver_data();
> +	int cl = get_cpu_cluster(policy->cpu);
> +	u32 cpu;
> +
> +	if (cl >= data->num_clusters)
> +		return -EINVAL;
> +
> +	policy->cur = tegra194_fast_get_speed(policy->cpu); /* boot freq */
> +
> +	/* set same policy for all cpus in a cluster */
> +	for (cpu = (cl * 2); cpu < ((cl + 1) * 2); cpu++)
> +		cpumask_set_cpu(cpu, policy->cpus);
> +
> +	policy->freq_table = data->tables[cl];
> +	policy->cpuinfo.transition_latency = TEGRA_CPUFREQ_TRANSITION_LATENCY;
> +
> +	return 0;
> +}
> +
> +static void set_cpu_ndiv(void *data)
> +{
> +	struct cpufreq_frequency_table *tbl = data;
> +	u64 ndiv_val = (u64)tbl->driver_data;
> +
> +	asm volatile("msr s3_0_c15_c0_4, %0" : : "r" (ndiv_val));
> +}
> +
> +static int tegra194_cpufreq_set_target(struct cpufreq_policy *policy,
> +				       unsigned int index)
> +{
> +	struct cpufreq_frequency_table *tbl = policy->freq_table + index;
> +
> +	/*
> +	 * Each core writes frequency in per core register. Then both cores
> +	 * in a cluster run at same frequency which is the maximum frequency
> +	 * request out of the values requested by both cores in that cluster.
> +	 */
> +	on_each_cpu_mask(policy->cpus, set_cpu_ndiv, tbl, true);
> +
> +	return 0;
> +}
> +
> +static struct cpufreq_driver tegra194_cpufreq_driver = {
> +	.name = "tegra194",
> +	.flags = CPUFREQ_STICKY | CPUFREQ_CONST_LOOPS |
> +		CPUFREQ_NEED_INITIAL_FREQ_CHECK,
> +	.verify = cpufreq_generic_frequency_table_verify,
> +	.target_index = tegra194_cpufreq_set_target,
> +	.get = tegra194_get_speed,
> +	.init = tegra194_cpufreq_init,
> +	.attr = cpufreq_generic_attr,
> +};
> +
> +static void tegra194_cpufreq_free_resources(void)
> +{
> +	destroy_workqueue(read_counters_wq);
> +}

I would not bother with adding this function either.

> +
> +static struct cpufreq_frequency_table *
> +init_freq_table(struct platform_device *pdev, struct tegra_bpmp *bpmp,
> +		unsigned int cluster_id)
> +{
> +	struct cpufreq_frequency_table *freq_table;
> +	struct mrq_cpu_ndiv_limits_response resp;
> +	unsigned int num_freqs, ndiv, delta_ndiv;
> +	struct mrq_cpu_ndiv_limits_request req;
> +	struct tegra_bpmp_message msg;
> +	u16 freq_table_step_size;
> +	int err, index;
> +
> +	memset(&req, 0, sizeof(req));
> +	req.cluster_id = cluster_id;
> +
> +	memset(&msg, 0, sizeof(msg));
> +	msg.mrq = MRQ_CPU_NDIV_LIMITS;
> +	msg.tx.data = &req;
> +	msg.tx.size = sizeof(req);
> +	msg.rx.data = &resp;
> +	msg.rx.size = sizeof(resp);
> +
> +	err = tegra_bpmp_transfer(bpmp, &msg);
> +	if (err)
> +		return ERR_PTR(err);
> +
> +	/*
> +	 * Make sure frequency table step is a multiple of mdiv to match
> +	 * vhint table granularity.
> +	 */
> +	freq_table_step_size = resp.mdiv *
> +			DIV_ROUND_UP(CPUFREQ_TBL_STEP_HZ, resp.ref_clk_hz);
> +
> +	dev_dbg(&pdev->dev, "cluster %d: frequency table step size: %d\n",
> +		cluster_id, freq_table_step_size);
> +
> +	delta_ndiv = resp.ndiv_max - resp.ndiv_min;
> +
> +	if (unlikely(delta_ndiv == 0)) {
> +		num_freqs = 1;
> +	} else {
> +		/* We store both ndiv_min and ndiv_max hence the +1 */
> +		num_freqs = delta_ndiv / freq_table_step_size + 1;
> +	}
> +
> +	num_freqs += (delta_ndiv % freq_table_step_size) ? 1 : 0;
> +
> +	freq_table = devm_kcalloc(&pdev->dev, num_freqs + 1,
> +				  sizeof(*freq_table), GFP_KERNEL);
> +	if (!freq_table)
> +		return ERR_PTR(-ENOMEM);
> +
> +	for (index = 0, ndiv = resp.ndiv_min;
> +			ndiv < resp.ndiv_max;
> +			index++, ndiv += freq_table_step_size) {
> +		freq_table[index].driver_data = ndiv;
> +		freq_table[index].frequency = map_ndiv_to_freq(&resp, ndiv);
> +	}
> +
> +	freq_table[index].driver_data = resp.ndiv_max;
> +	freq_table[index++].frequency = map_ndiv_to_freq(&resp, resp.ndiv_max);
> +	freq_table[index].frequency = CPUFREQ_TABLE_END;
> +
> +	return freq_table;
> +}
> +
> +static int tegra194_cpufreq_probe(struct platform_device *pdev)
> +{
> +	struct tegra194_cpufreq_data *data;
> +	struct tegra_bpmp *bpmp;
> +	int err, i;
> +
> +	data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL);
> +	if (!data)
> +		return -ENOMEM;
> +
> +	data->num_clusters = MAX_CLUSTERS;
> +	data->tables = devm_kcalloc(&pdev->dev, data->num_clusters,
> +				    sizeof(*data->tables), GFP_KERNEL);
> +	if (!data->tables)
> +		return -ENOMEM;
> +
> +	platform_set_drvdata(pdev, data);
> +
> +	bpmp = tegra_bpmp_get(&pdev->dev);
> +	if (IS_ERR(bpmp))
> +		return PTR_ERR(bpmp);
> +
> +	read_counters_wq = alloc_workqueue("read_counters_wq", __WQ_LEGACY, 1);
> +	if (!read_counters_wq) {
> +		dev_err(&pdev->dev, "fail to create_workqueue\n");
> +		err = -EINVAL;
> +		goto put_bpmp;
> +	}
> +
> +	for (i = 0; i < data->num_clusters; i++) {
> +		data->tables[i] = init_freq_table(pdev, bpmp, i);
> +		if (IS_ERR(data->tables[i])) {
> +			err = PTR_ERR(data->tables[i]);
> +			goto err_free_res;
> +		}
> +	}
> +
> +	tegra194_cpufreq_driver.driver_data = data;
> +
> +	err = cpufreq_register_driver(&tegra194_cpufreq_driver);
> +	if (err)
> +		goto err_free_res;

You don't need the above if statement now you added the below.

> +
> +	if (!err)
> +		goto put_bpmp;
> +
> +err_free_res:
> +	tegra194_cpufreq_free_resources();
> +put_bpmp:
> +	tegra_bpmp_put(bpmp);
> +	return err;
> +}
> +
> +static int tegra194_cpufreq_remove(struct platform_device *pdev)
> +{
> +	cpufreq_unregister_driver(&tegra194_cpufreq_driver);
> +	tegra194_cpufreq_free_resources();
> +
> +	return 0;
> +}
> +
> +static const struct of_device_id tegra194_cpufreq_of_match[] = {
> +	{ .compatible = "nvidia,tegra194-ccplex", },
> +	{ /* sentinel */ }
> +};
> +MODULE_DEVICE_TABLE(of, tegra194_cpufreq_of_match);
> +
> +static struct platform_driver tegra194_ccplex_driver = {
> +	.driver = {
> +		.name = "tegra194-cpufreq",
> +		.of_match_table = tegra194_cpufreq_of_match,
> +	},
> +	.probe = tegra194_cpufreq_probe,
> +	.remove = tegra194_cpufreq_remove,
> +};
> +module_platform_driver(tegra194_ccplex_driver);
> +
> +MODULE_AUTHOR("Mikko Perttunen <mperttunen@xxxxxxxxxx>");
> +MODULE_AUTHOR("Sumit Gupta <sumitg@xxxxxxxxxx>");
> +MODULE_DESCRIPTION("NVIDIA Tegra194 cpufreq driver");
> +MODULE_LICENSE("GPL v2");
> 

Cheers
Jon

-- 
nvpublic



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux