Marek
On 7/15/20 7:40 AM, Marek Behún wrote:
Add device-tree bindings documentation for Turris Omnia RGB LEDs.
Signed-off-by: Marek Behún <marek.behun@xxxxxx>
Cc: Rob Herring <robh+dt@xxxxxxxxxx>
Cc: devicetree@xxxxxxxxxxxxxxx
---
.../leds/cznic,turris-omnia-leds.yaml | 88 +++++++++++++++++++
1 file changed, 88 insertions(+)
create mode 100644 Documentation/devicetree/bindings/leds/cznic,turris-omnia-leds.yaml
diff --git a/Documentation/devicetree/bindings/leds/cznic,turris-omnia-leds.yaml b/Documentation/devicetree/bindings/leds/cznic,turris-omnia-leds.yaml
new file mode 100644
index 000000000000..0b33ebf22e27
--- /dev/null
+++ b/Documentation/devicetree/bindings/leds/cznic,turris-omnia-leds.yaml
@@ -0,0 +1,88 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/leds/cznic,turris-omnia-leds.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: CZ.NIC's Turris Omnia LEDs driver
+
+maintainers:
+ - Marek Behún <marek.behun@xxxxxx>
+
+description:
+ This module adds support for the RGB LEDs found on the fron panel of the
s/fron/front
+ Turris Omnia router. There are 12 RGB LEDs, they are controlled by device's
+ microcontroller with which the system communicates via I2C. Each LED is
This is a bit confusing and reads very rough can maybe
There are 12 RGB LEDs that are controlled via a micro controller that
communicates via the I2C bus.
Dan
