Hi Lorenzo,
On 2020/07/11 1:14, Lorenzo Pieralisi wrote:
On Wed, Jul 01, 2020 at 11:18:29AM +0900, Kunihiko Hayashi wrote:
[...]
-static void uniphier_pcie_irq_handler(struct irq_desc *desc)
+static void uniphier_pcie_misc_isr(struct pcie_port *pp, bool is_msi)
{
- struct pcie_port *pp = irq_desc_get_handler_data(desc);
struct dw_pcie *pci = to_dw_pcie_from_pp(pp);
struct uniphier_pcie_priv *priv = to_uniphier_pcie(pci);
- struct irq_chip *chip = irq_desc_get_chip(desc);
- unsigned long reg;
- u32 val, bit, virq;
+ u32 val, virq;
- /* INT for debug */
val = readl(priv->base + PCL_RCV_INT);
if (val & PCL_CFG_BW_MGT_STATUS)
dev_dbg(pci->dev, "Link Bandwidth Management Event\n");
+
if (val & PCL_CFG_LINK_AUTO_BW_STATUS)
dev_dbg(pci->dev, "Link Autonomous Bandwidth Event\n");
- if (val & PCL_CFG_AER_RC_ERR_MSI_STATUS)
- dev_dbg(pci->dev, "Root Error\n");
- if (val & PCL_CFG_PME_MSI_STATUS)
- dev_dbg(pci->dev, "PME Interrupt\n");
+
+ if (is_msi) {
+ if (val & PCL_CFG_AER_RC_ERR_MSI_STATUS)
+ dev_dbg(pci->dev, "Root Error Status\n");
+
+ if (val & PCL_CFG_PME_MSI_STATUS)
+ dev_dbg(pci->dev, "PME Interrupt\n");
+
+ if (val & (PCL_CFG_AER_RC_ERR_MSI_STATUS |
+ PCL_CFG_PME_MSI_STATUS)) {
+ virq = irq_linear_revmap(pp->irq_domain, 0);
+ generic_handle_irq(virq);
+ }
+ }
Please have two handlers: one for interrupts that are from the RC,
another for interrupts coming from the endpoints.
I assume that this handler treats interrupts from the RC only and
this is set on the member ".msi_host_isr" added in the patch 1/6.
I think that the handler for interrupts coming from endpoints should be
treated as a normal case (after calling .msi_host_isr in
dw_handle_msi_irq()).
It looks pretty odd that you end-up dealing with both from the
same "parent" interrupt. I guess this is in keeping with the
rest of the DW PCIe hacks... :-/
It might be odd, however, in case of UniPhier SoC,
both MSI interrupts from endpoints and PME/AER interrupts from RC are
asserted by same "parent" interrupt. In other words, PME/AER interrupts
are notified using the parent interrupt for MSI.
MSI interrupts are treated as child interrupts with reference to
the status register in DW core. This is handled in a for-loop in
dw_handle_msi_irq().
PME/AER interrupts are treated with reference to the status register
in UniPhier glue layer, however, this couldn't be handled in the same way
directly.
So I'm trying to add .msi_host_isr function to handle this
with reference to the SoC-specific registers.
This exported function asserts MSI-0 as a shared child interrupt.
As a result, PME/AER are registered like the followings in dmesg:
pcieport 0000:00:00.0: PME: Signaling with IRQ 25
pcieport 0000:00:00.0: AER: enabled with IRQ 25
And these interrupts are shared as MSI-0:
# cat /proc/interrupts | grep 25:
25: 0 0 0 0 PCI-MSI 0 Edge PCIe PME, aerdrv
This might be a special case, though, I think that this is needed to handle
interrupts from RC sharing MSI parent.
Can you please send me (with this series *applied* of course and if
possible with an endpoint MSI/MSI-X capable enabled):
- full dmesg log
- lspci -vv output
- cat /proc/interrupts
I need to understand how this system HW works before commenting any
further.
Okay, I attach all the log to this mail.
This controller has MSI support only, and I attached R8169 ethernet card
to PCIe slot to enable the controller.
It is for Lorenzo to make up his mind about this anyway.
I'd like to Lorenzo's opinion, too.
I am trying to understand how the HW is wired up (and that's what Marc
asked as well) so first things first, please send the logs.
I hope this will help your understanding.
Thank you,
---
Best Regards
Kunihiko Hayashi
root@akebi96:~# dmesg
[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd082]
[ 0.000000] Linux version 5.8.0-rc4-next-20200710-00007-g868c2f1a3dad (hayashi@ubuntu) (aarch64-linux-gnu-gcc (Linaro GCC 7.5-2019.12) 7.5.0, GNU ld (Linaro_Binutils-2019.12) 2.28.2.20170706) #21 SMP PREEMPT Mon Jul 13 09:48:17 JST 2020
[ 0.000000] Machine model: Akebi96
[ 0.000000] efi: UEFI not found.
[ 0.000000] cma: Reserved 32 MiB at 0x00000000fdc00000
[ 0.000000] NUMA: No NUMA configuration found
[ 0.000000] NUMA: Faking a node at [mem 0x0000000080000000-0x000000013fffffff]
[ 0.000000] NUMA: NODE_DATA [mem 0x13f9f5340-0x13f9f723f]
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000080000000-0x00000000bfffffff]
[ 0.000000] DMA32 [mem 0x00000000c0000000-0x00000000ffffffff]
[ 0.000000] Normal [mem 0x0000000100000000-0x000000013fffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000080000000-0x0000000080ffffff]
[ 0.000000] node 0: [mem 0x0000000082000000-0x00000000bfffffff]
[ 0.000000] node 0: [mem 0x00000000c2000000-0x000000013fffffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x000000013fffffff]
[ 0.000000] On node 0 totalpages: 774144
[ 0.000000] DMA zone: 4096 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 258048 pages, LIFO batch:63
[ 0.000000] DMA32 zone: 4096 pages used for memmap
[ 0.000000] DMA32 zone: 253952 pages, LIFO batch:63
[ 0.000000] Normal zone: 4096 pages used for memmap
[ 0.000000] Normal zone: 262144 pages, LIFO batch:63
[ 0.000000] psci: probing for conduit method from DT.
[ 0.000000] psci: PSCIv1.1 detected in firmware.
[ 0.000000] psci: Using standard PSCI v0.2 function IDs
[ 0.000000] psci: Trusted OS migration not required
[ 0.000000] psci: SMC Calling Convention v1.2
[ 0.000000] percpu: Embedded 23 pages/cpu s54040 r8192 d31976 u94208
[ 0.000000] pcpu-alloc: s54040 r8192 d31976 u94208 alloc=23*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
[ 0.000000] Detected PIPT I-cache on CPU0
[ 0.000000] CPU features: detected: GIC system register CPU interface
[ 0.000000] CPU features: detected: EL2 vector hardening
[ 0.000000] Speculative Store Bypass Disable mitigation not required
[ 0.000000] CPU features: detected: ARM errata 1165522, 1319367, or 1530923
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 761856
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line:
[ 0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
[ 0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[ 0.000000] software IO TLB: mapped [mem 0xbbfff000-0xbffff000] (64MB)
[ 0.000000] Memory: 2881608K/3096576K available (14076K kernel code, 2240K rwdata, 7572K rodata, 5696K init, 486K bss, 182200K reserved, 32768K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] rcu: Preemptible hierarchical RCU implementation.
[ 0.000000] rcu: RCU event tracing is enabled.
[ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4.
[ 0.000000] Trampoline variant of Tasks RCU enabled.
[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[ 0.000000] GICv3: GIC: Using split EOI/Deactivate mode
[ 0.000000] GICv3: 512 SPIs implemented
[ 0.000000] GICv3: 0 Extended SPIs implemented
[ 0.000000] GICv3: Distributor has no Range Selector support
[ 0.000000] GICv3: 16 PPIs implemented
[ 0.000000] GICv3: CPU0: found redistributor 0 region 0:0x000000005fe80000
[ 0.000000] random: get_random_bytes called from start_kernel+0x314/0x4f0 with crng_init=0
[ 0.000000] arch_timer: cp15 timer(s) running at 50.00MHz (phys).
[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xb8812736b, max_idle_ns: 440795202655 ns
[ 0.000003] sched_clock: 56 bits at 50MHz, resolution 20ns, wraps every 4398046511100ns
[ 0.000358] Console: colour dummy device 80x25
[ 0.000628] printk: console [tty0] enabled
[ 0.000690] Calibrating delay loop (skipped), value calculated using timer frequency.. 100.00 BogoMIPS (lpj=200000)
[ 0.000705] pid_max: default: 32768 minimum: 301
[ 0.000758] LSM: Security Framework initializing
[ 0.000846] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
[ 0.000905] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
[ 0.002094] rcu: Hierarchical SRCU implementation.
[ 0.003161] EFI services will not be available.
[ 0.003357] smp: Bringing up secondary CPUs ...
[ 0.028171] Detected PIPT I-cache on CPU1
[ 0.028201] GICv3: CPU1: found redistributor 1 region 0:0x000000005fea0000
[ 0.028228] CPU1: Booted secondary processor 0x0000000001 [0x410fd082]
[ 0.040780] CPU features: detected: ARM erratum 845719
[ 0.040794] Detected VIPT I-cache on CPU2
[ 0.040821] GICv3: CPU2: found redistributor 100 region 0:0x000000005fec0000
[ 0.040852] CPU2: Booted secondary processor 0x0000000100 [0x410fd034]
[ 0.053434] Detected VIPT I-cache on CPU3
[ 0.053453] GICv3: CPU3: found redistributor 101 region 0:0x000000005fee0000
[ 0.053471] CPU3: Booted secondary processor 0x0000000101 [0x410fd034]
[ 0.053567] smp: Brought up 1 node, 4 CPUs
[ 0.053628] SMP: Total of 4 processors activated.
[ 0.053636] CPU features: detected: 32-bit EL0 Support
[ 0.053644] CPU features: detected: CRC32 instructions
[ 0.053652] CPU features: detected: 32-bit EL1 Support
[ 0.069374] CPU: All CPU(s) started at EL2
[ 0.069409] alternatives: patching kernel code
[ 0.070560] devtmpfs: initialized
[ 0.074955] KASLR disabled due to lack of seed
[ 0.075508] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.075541] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[ 0.076843] pinctrl core: initialized pinctrl subsystem
[ 0.078133] thermal_sys: Registered thermal governor 'step_wise'
[ 0.078136] thermal_sys: Registered thermal governor 'power_allocator'
[ 0.078489] DMI not present or invalid.
[ 0.079115] NET: Registered protocol family 16
[ 0.080223] DMA: preallocated 512 KiB GFP_KERNEL pool for atomic allocations
[ 0.080365] DMA: preallocated 512 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[ 0.080608] DMA: preallocated 512 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
[ 0.080719] audit: initializing netlink subsys (disabled)
[ 0.080920] audit: type=2000 audit(0.080:1): state=initialized audit_enabled=0 res=1
[ 0.081732] cpuidle: using governor menu
[ 0.081826] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[ 0.081907] ASID allocator initialised with 65536 entries
[ 0.083251] Serial: AMBA PL011 UART driver
[ 0.106086] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[ 0.106112] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages
[ 0.106126] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.106140] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages
[ 0.107261] cryptd: max_cpu_qlen set to 1000
[ 0.109289] ACPI: Interpreter disabled.
[ 0.110385] iommu: Default domain type: Translated
[ 0.110624] vgaarb: loaded
[ 0.110992] SCSI subsystem initialized
[ 0.111140] libata version 3.00 loaded.
[ 0.111382] usbcore: registered new interface driver usbfs
[ 0.111433] usbcore: registered new interface driver hub
[ 0.111502] usbcore: registered new device driver usb
[ 0.112240] pps_core: LinuxPPS API ver. 1 registered
[ 0.112252] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@xxxxxxxx>
[ 0.112279] PTP clock support registered
[ 0.112413] EDAC MC: Ver: 3.0.0
[ 0.113709] FPGA manager framework
[ 0.113811] Advanced Linux Sound Architecture Driver Initialized.
[ 0.114454] clocksource: Switched to clocksource arch_sys_counter
[ 0.114662] VFS: Disk quotas dquot_6.6.0
[ 0.114727] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.114943] pnp: PnP ACPI: disabled
[ 0.120538] NET: Registered protocol family 2
[ 0.120950] tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 32768 bytes, linear)
[ 0.121018] TCP established hash table entries: 32768 (order: 6, 262144 bytes, linear)
[ 0.121260] TCP bind hash table entries: 32768 (order: 7, 524288 bytes, linear)
[ 0.121802] TCP: Hash tables configured (established 32768 bind 32768)
[ 0.121949] UDP hash table entries: 2048 (order: 4, 65536 bytes, linear)
[ 0.122047] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes, linear)
[ 0.122263] NET: Registered protocol family 1
[ 0.122796] RPC: Registered named UNIX socket transport module.
[ 0.122810] RPC: Registered udp transport module.
[ 0.122821] RPC: Registered tcp transport module.
[ 0.122831] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.122850] PCI: CLS 0 bytes, default 64
[ 0.123057] Unpacking initramfs...
[ 1.191696] Freeing initrd memory: 24236K
[ 1.192241] kvm [1]: IPA Size Limit: 40bits
[ 1.193026] kvm [1]: GICv3: no GICV resource entry
[ 1.193040] kvm [1]: disabling GICv2 emulation
[ 1.193069] kvm [1]: GIC system register CPU interface enabled
[ 1.193178] kvm [1]: vgic interrupt IRQ1
[ 1.193323] kvm [1]: Hyp mode initialized successfully
[ 1.196991] Initialise system trusted keyrings
[ 1.197142] workingset: timestamp_bits=44 max_order=20 bucket_order=0
[ 1.203283] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 1.203979] NFS: Registering the id_resolver key type
[ 1.204017] Key type id_resolver registered
[ 1.204027] Key type id_legacy registered
[ 1.204046] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[ 1.204229] 9p: Installing v9fs 9p2000 file system support
[ 1.244795] Key type asymmetric registered
[ 1.244810] Asymmetric key parser 'x509' registered
[ 1.244850] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 245)
[ 1.244867] io scheduler mq-deadline registered
[ 1.244879] io scheduler kyber registered
[ 1.253988] gpio-427 (xirq0): hogged as input
[ 1.254024] gpio-437 (xirq10): hogged as input
[ 1.256150] uniphier-pcie 66000000.pcie: invalid resource
[ 1.257038] EINJ: ACPI disabled.
[ 1.273041] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 1.275558] 54006800.serial: ttyS0 at MMIO 0x54006800 (irq = 7, base_baud = 3676470) is a 16550A
[ 2.195244] printk: console [ttyS0] enabled
[ 2.200114] 54006a00.serial: ttyS2 at MMIO 0x54006a00 (irq = 8, base_baud = 3676470) is a 16550A
[ 2.209472] 54006b00.serial: ttyS3 at MMIO 0x54006b00 (irq = 9, base_baud = 3676470) is a 16550A
[ 2.219222] SuperH (H)SCI(F) driver initialized
[ 2.224360] msm_serial: driver initialized
[ 2.229969] cacheinfo: Unable to detect cache hierarchy for CPU 0
[ 2.243361] loop: module loaded
[ 2.247520] megasas: 07.714.04.00-rc1
[ 2.256366] libphy: Fixed MDIO Bus: probed
[ 2.261405] tun: Universal TUN/TAP device driver, 1.6
[ 2.267383] thunder_xcv, ver 1.0
[ 2.270667] thunder_bgx, ver 1.0
[ 2.273932] nicpf, ver 1.0
[ 2.277750] hclge is initializing
[ 2.281131] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version
[ 2.288386] hns3: Copyright (c) 2017 Huawei Corporation.
[ 2.293763] e1000: Intel(R) PRO/1000 Network Driver
[ 2.298658] e1000: Copyright (c) 1999-2006 Intel Corporation.
[ 2.304465] e1000e: Intel(R) PRO/1000 Network Driver
[ 2.309451] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[ 2.315426] igb: Intel(R) Gigabit Ethernet Network Driver
[ 2.320844] igb: Copyright (c) 2007-2014 Intel Corporation.
[ 2.326467] igbvf: Intel(R) Gigabit Virtual Function Network Driver
[ 2.332752] igbvf: Copyright (c) 2009 - 2012 Intel Corporation.
[ 2.339037] sky2: driver version 1.30
[ 2.343674] ave 65000000.ethernet: Using random MAC address: 82:4d:4d:25:34:9d
[ 2.474822] libphy: uniphier-mdio: probed
[ 2.483088] RTL8211E Gigabit Ethernet 65000000.ethernet-ffffffff:00: attached PHY driver [RTL8211E Gigabit Ethernet] (mii_bus:phy_addr=65000000.ethernet-ffffffff:00, irq=POLL)
[ 2.499197] ave 65000000.ethernet: Socionext AVE4 Ethernet IP v1.4 (irq=18, phy=rgmii)
[ 2.507943] VFIO - User Level meta-driver version: 0.3
[ 2.516227] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 2.522832] ehci-pci: EHCI PCI platform driver
[ 2.527335] ehci-platform: EHCI generic platform driver
[ 2.532726] ehci-orion: EHCI orion driver
[ 2.536867] ehci-exynos: EHCI Exynos driver
[ 2.541158] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 2.547376] ohci-pci: OHCI PCI platform driver
[ 2.551873] ohci-platform: OHCI generic platform driver
[ 2.557223] ohci-exynos: OHCI Exynos driver
[ 2.562108] usbcore: registered new interface driver usb-storage
[ 2.570705] i2c /dev entries driver
[ 2.582814] uniphier-wdt 61840000.sysctrl:watchdog: watchdog driver (timeout=64 sec, nowayout=0)
[ 2.594503] sdhci: Secure Digital Host Controller Interface driver
[ 2.600746] sdhci: Copyright(c) Pierre Ossman
[ 2.605573] Synopsys Designware Multimedia Card Interface Driver
[ 2.612587] sdhci-pltfm: SDHCI platform and OF driver helper
[ 2.618719] sdhci-cdns 5a000000.mmc: allocated mmc-pwrseq
[ 2.655708] mmc0: SDHCI controller on 5a000000.mmc [5a000000.mmc] using ADMA 64-bit
[ 2.665301] ledtrig-cpu: registered to indicate activity on CPUs
[ 2.672070] SMCCC: SOC_ID: ARCH_SOC_ID(0) returned error: ffffffffffffffff
[ 2.679816] usbcore: registered new interface driver usbhid
[ 2.685435] usbhid: USB HID core driver
[ 2.692948] optee: probing for conduit method.
[ 2.697452] optee: revision 3.8 (af141c61)
[ 2.704614] optee: dynamic shared memory is enabled
[ 2.755775] optee: initialized driver
[ 2.761336] NET: Registered protocol family 17
[ 2.765987] 9pnet: Installing 9P2000 support
[ 2.770332] Key type dns_resolver registered
[ 2.774840] registered taskstats version 1
[ 2.778967] Loading compiled-in X.509 certificates
[ 2.791384] mmc0: new HS200 MMC card at address 0001
[ 2.797156] mmcblk0: mmc0:0001 016G30 14.7 GiB
[ 2.801188] uniphier-pcie 66000000.pcie: invalid resource
[ 2.802087] mmcblk0boot0: mmc0:0001 016G30 partition 1 4.00 MiB
[ 2.813353] mmcblk0boot1: mmc0:0001 016G30 partition 2 4.00 MiB
[ 2.819480] mmcblk0rpmb: mmc0:0001 016G30 partition 3 4.00 MiB, chardev (234:0)
[ 2.831986] mmcblk0: p1 p2 p3 p4 p5
[ 3.107392] uniphier-pcie 66000000.pcie: host bridge /soc@0/pcie@66000000 ranges:
[ 3.114962] uniphier-pcie 66000000.pcie: IO 0x002ffe0000..0x002ffeffff -> 0x0000000000
[ 3.123457] uniphier-pcie 66000000.pcie: MEM 0x0020000000..0x002ffdffff -> 0x0020000000
[ 3.232144] uniphier-pcie 66000000.pcie: Link up
[ 3.236912] uniphier-pcie 66000000.pcie: PCI host bridge to bus 0000:00
[ 3.243557] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 3.249068] pci_bus 0000:00: root bus resource [io 0x0000-0xffff]
[ 3.255274] pci_bus 0000:00: root bus resource [mem 0x20000000-0x2ffdffff]
[ 3.262206] pci 0000:00:00.0: [50c1:0001] type 01 class 0x060400
[ 3.268261] pci 0000:00:00.0: reg 0x10: [mem 0x00000000-0x03ffffff]
[ 3.274564] pci 0000:00:00.0: reg 0x38: [mem 0x00000000-0x0000ffff pref]
[ 3.281352] pci 0000:00:00.0: supports D1
[ 3.285380] pci 0000:00:00.0: PME# supported from D0 D1 D3hot D3cold
[ 3.293567] pci 0000:01:00.0: [10ec:8168] type 00 class 0x020000
[ 3.299772] pci 0000:01:00.0: reg 0x10: [io 0x0000-0x00ff]
[ 3.305503] pci 0000:01:00.0: reg 0x18: [mem 0x00000000-0x00000fff 64bit]
[ 3.312410] pci 0000:01:00.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit pref]
[ 3.320290] pci 0000:01:00.0: supports D1 D2
[ 3.324582] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 3.343875] pci 0000:00:00.0: BAR 0: assigned [mem 0x20000000-0x23ffffff]
[ 3.350700] pci 0000:00:00.0: BAR 14: assigned [mem 0x24000000-0x240fffff]
[ 3.357603] pci 0000:00:00.0: BAR 15: assigned [mem 0x24100000-0x241fffff 64bit pref]
[ 3.365462] pci 0000:00:00.0: BAR 6: assigned [mem 0x24200000-0x2420ffff pref]
[ 3.372711] pci 0000:00:00.0: BAR 13: assigned [io 0x1000-0x1fff]
[ 3.378919] pci 0000:01:00.0: BAR 4: assigned [mem 0x24100000-0x24103fff 64bit pref]
[ 3.386762] pci 0000:01:00.0: BAR 2: assigned [mem 0x24000000-0x24000fff 64bit]
[ 3.394164] pci 0000:01:00.0: BAR 0: assigned [io 0x1000-0x10ff]
[ 3.400303] pci 0000:00:00.0: PCI bridge to [bus 01-ff]
[ 3.405549] pci 0000:00:00.0: bridge window [io 0x1000-0x1fff]
[ 3.411669] pci 0000:00:00.0: bridge window [mem 0x24000000-0x240fffff]
[ 3.418484] pci 0000:00:00.0: bridge window [mem 0x24100000-0x241fffff 64bit pref]
[ 3.426635] pcieport 0000:00:00.0: PME: Signaling with IRQ 24
[ 3.432638] pcieport 0000:00:00.0: AER: enabled with IRQ 24
[ 3.438585] r8169 0000:01:00.0: enabling device (0000 -> 0003)
[ 3.448382] libphy: r8169: probed
[ 3.452575] r8169 0000:01:00.0 eth1: RTL8168e/8111e, 7c:8b:ca:03:1f:33, XID 2c2, IRQ 25
[ 3.460628] r8169 0000:01:00.0 eth1: jumbo features [frames: 9194 bytes, tx checksumming: ko]
[ 3.478193] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[ 3.483775] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1
[ 3.491643] xhci-hcd xhci-hcd.0.auto: hcc params 0x0230fe6d hci version 0x110 quirks 0x0000000002010010
[ 3.501129] xhci-hcd xhci-hcd.0.auto: irq 19, io mem 0x65a00000
[ 3.507936] hub 1-0:1.0: USB hub found
[ 3.511732] hub 1-0:1.0: 4 ports detected
[ 3.516166] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[ 3.521687] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2
[ 3.529386] xhci-hcd xhci-hcd.0.auto: Host supports USB 3.0 SuperSpeed
[ 3.535993] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[ 3.544539] hub 2-0:1.0: USB hub found
[ 3.548330] hub 2-0:1.0: 2 ports detected
[ 3.553185] ALSA device list:
[ 3.556179] No soundcards found.
[ 3.563862] Freeing unused kernel memory: 5696K
[ 3.568513] Run /init as init process
[ 3.572184] with arguments:
[ 3.572186] /init
[ 3.572188] with environment:
[ 3.572191] HOME=/
[ 3.572193] TERM=linux
[ 3.702799] udevd[151]: starting version 3.2.1
[ 3.707631] random: udevd: uninitialized urandom read (16 bytes read)
[ 3.714216] random: udevd: uninitialized urandom read (16 bytes read)
[ 3.720702] random: udevd: uninitialized urandom read (16 bytes read)
[ 3.731790] udevd[152]: starting eudev-3.2.1
[ 3.848597] random: fast init done
[ 3.854529] usb 1-4: new high-speed USB device number 2 using xhci-hcd
[ 4.125374] splice write not supported for file (pid: 215 comm: cat)
[ 4.266321] splice write not supported for file (pid: 263 comm: cat)
[ 4.277542] splice write not supported for file (pid: 266 comm: cat)
[ 4.284170] splice write not supported for file (pid: 266 comm: cat)
[ 4.295556] splice write not supported for file (pid: 270 comm: cat)
[ 4.307134] splice write not supported for file (pid: 273 comm: cat)
[ 4.324074] splice write not supported for file (pid: 278 comm: cat)
[ 4.335313] splice write not supported for file (pid: 281 comm: cat)
[ 4.342004] splice write not supported for file (pid: 281 comm: cat)
[ 4.353363] splice write not supported for file (pid: 285 comm: cat)
root@akebi96:~#
root@akebi96:~# lspci -vv
00:00.0 Class 0604: Device 50c1:0001 (rev 01)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 24
Region 0: Memory at 20000000 (32-bit, non-prefetchable) [size=64M]
Bus: primary=00, secondary=01, subordinate=ff, sec-latency=0
I/O behind bridge: 00001000-00001fff
Memory behind bridge: 24000000-240fffff
Prefetchable memory behind bridge: 0000000024100000-00000000241fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
[virtual] Expansion ROM at 24200000 [disabled] [size=64K]
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [40] Power Management version 3
Flags: PMEClk- DSI- D1+ D2- AuxCurrent=375mA PME(D0+,D1+,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [50] MSI: Enable+ Count=1/1 Maskable+ 64bit+
Address: 00000000bbfff000 Data: 0000
Masking: 00000000 Pending: 00000000
Capabilities: [70] Express (v2) Root Port (Slot-), MSI 00
DevCap: MaxPayload 256 bytes, PhantFunc 0
ExtTag- RBE+
DevCtl: Report errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+
RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 512 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
LnkCap: Port #0, Speed 5GT/s, Width x1, ASPM L0s L1, Exit Latency L0s <1us, L1 <64us
ClockPM- Surprise- LLActRep+ BwNot+ ASPMOptComp+
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt+ ABWMgmt-
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna+ CRSVisible-
RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
DevCap2: Completion Timeout: Range ABCD, TimeoutDis+, LTR+, OBFF Via message/WAKE# ARIFwd-
DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-, LTR+, OBFF Disabled ARIFwd-
LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis-
Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
Compliance De-emphasis: -6dB
LnkSta2: Current De-emphasis Level: -3.5dB, EqualizationComplete-, EqualizationPhase1-
EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest-
Capabilities: [100 v2] Advanced Error Reporting
UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
AERCap: First Error Pointer: 00, GenCap+ CGenEn- ChkCap+ ChkEn-
Kernel driver in use: pcieport
01:00.0 Class 0200: Device 10ec:8168 (rev 06)
Subsystem: Device 7470:3468
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 23
Region 0: I/O ports at 1000 [size=256]
Region 2: Memory at 24000000 (64-bit, non-prefetchable) [size=4K]
Region 4: Memory at 24100000 (64-bit, prefetchable) [size=16K]
Capabilities: [40] Power Management version 3
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [50] MSI: Enable- Count=1/1 Maskable- 64bit+
Address: 0000000000000000 Data: 0000
Capabilities: [70] Express (v2) Endpoint, MSI 01
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <512ns, L1 <64us
ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset- SlotPowerLimit 0.000W
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 512 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Exit Latency L0s <512ns, L1 <64us
ClockPM+ Surprise- LLActRep- BwNot- ASPMOptComp-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
DevCap2: Completion Timeout: Not Supported, TimeoutDis+, LTR-, OBFF Not Supported
DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-, LTR-, OBFF Disabled
LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-
Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
Compliance De-emphasis: -6dB
LnkSta2: Current De-emphasis Level: -6dB, EqualizationComplete-, EqualizationPhase1-
EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest-
Capabilities: [b0] MSI-X: Enable+ Count=4 Masked-
Vector table: BAR=4 offset=00000000
PBA: BAR=4 offset=00000800
Capabilities: [d0] Vital Product Data Not readable
Capabilities: [100 v1] Advanced Error Reporting
UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
AERCap: First Error Pointer: 00, GenCap+ CGenEn- ChkCap+ ChkEn-
Capabilities: [140 v1] Virtual Channel
Caps: LPEVC=0 RefClk=100ns PATEntryBits=1
Arb: Fixed- WRR32- WRR64- WRR128-
Ctrl: ArbSelect=Fixed
Status: InProgress-
VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=ff
Status: NegoPending- InProgress-
Capabilities: [160 v1] Device Serial Number f8-45-00-00-68-4c-e0-00
Kernel driver in use: r8169
root@akebi96:~# cat /proc/interrupts
[ 189.905575] do_splice_from: 3 callbacks suppressed
[ 189.905588] splice write not supported for file /ttyS0 (pid: 383 comm: cat)
CPU0 CPU1 CPU2 CPU3
1: 0 0 0 0 GICv3 25 Level vgic
3: 539 846 1110 1171 GICv3 30 Level arch_timer
4: 0 0 0 0 GICv3 27 Level kvm guest vtimer
7: 2078 0 0 0 GICv3 65 Level ttyS0
11: 0 0 0 0 GICv3 73 Level 58780000.i2c
12: 0 0 0 0 GICv3 74 Level 58781000.i2c
13: 0 0 0 0 GICv3 75 Level 58782000.i2c
14: 0 0 0 0 GICv3 57 Level 58785000.i2c
15: 702 0 0 0 GICv3 110 Level mmc0
17: 0 0 0 0 GICv3 35 Level thermal
18: 355 0 0 0 GICv3 98 Level eth0
19: 46 0 0 0 GICv3 166 Level xhci-hcd:usb1
24: 0 0 0 0 PCI-MSI 0 Edge PCIe PME, aerdrv
25: 0 0 0 0 PCI-MSI 524288 Edge eth1
IPI0: 375 508 409 457 Rescheduling interrupts
IPI1: 288 275 541 413 Function call interrupts
IPI2: 0 0 0 0 CPU stop interrupts
IPI3: 0 0 0 0 CPU stop (for crash dump) interrupts
IPI4: 0 0 0 0 Timer broadcast interrupts
IPI5: 0 0 0 0 IRQ work interrupts
IPI6: 0 0 0 0 CPU wake-up interrupts
Err: 0
root@akebi96:~#
