Add the reg property to each channel node. This update is
to accommodate the multicolor framework. In addition to the
accommodation this allows the LEDs to be placed on any channel
and allow designs to skip channels as opposed to requiring
sequential order.
Acked-by: Pavel Machek <pavel@xxxxxx>
Signed-off-by: Dan Murphy <dmurphy@xxxxxx>
CC: Shawn Guo <shawnguo@xxxxxxxxxx>
CC: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
CC: Pengutronix Kernel Team <kernel@xxxxxxxxxxxxxx>
CC: Fabio Estevam <festevam@xxxxxxxxx>
CC: NXP Linux Team <linux-imx@xxxxxxx>
---
arch/arm/boot/dts/imx6dl-yapp4-common.dtsi | 14 ++++++++++----
1 file changed, 10 insertions(+), 4 deletions(-)
diff --git a/arch/arm/boot/dts/imx6dl-yapp4-common.dtsi b/arch/arm/boot/dts/imx6dl-yapp4-common.dtsi
index 2b9423d55c37..77aa90640052 100644
--- a/arch/arm/boot/dts/imx6dl-yapp4-common.dtsi
+++ b/arch/arm/boot/dts/imx6dl-yapp4-common.dtsi
@@ -258,29 +258,35 @@ leds: led-controller@30 {
reg = <0x30>;
clock-mode = /bits/ 8 <1>;
status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <0>;
- chan0 {
+ chan@0 {
chan-name = "R";
led-cur = /bits/ 8 <0x20>;
max-cur = /bits/ 8 <0x60>;
+ reg = <0>;
};
- chan1 {
+ chan@1 {
chan-name = "G";
led-cur = /bits/ 8 <0x20>;
max-cur = /bits/ 8 <0x60>;
+ reg = <1>;
};
- chan2 {
+ chan@2 {
chan-name = "B";
led-cur = /bits/ 8 <0x20>;
max-cur = /bits/ 8 <0x60>;
+ reg = <2>;
};
- chan3 {
+ chan@3 {
chan-name = "W";
led-cur = /bits/ 8 <0x0>;
max-cur = /bits/ 8 <0x0>;
+ reg = <3>;
};
};
--
2.27.0
