Hi Vinod,
> El 13 jul 2020, a las 7:51, Vinod Koul <vkoul@xxxxxxxxxx> escribió:
>
> On 19-06-20, 12:00, Álvaro Fernández Rojas wrote:
>> Add BCM63xx USBH PHY driver for BMIPS.
>>
>> Signed-off-by: Álvaro Fernández Rojas <noltari@xxxxxxxxx>
>> ---
>> v5: use devm_reset_control_get_exclusive.
>> v4: several improvements:
>> - Use devm_platform_ioremap_resource.
>> - Code cleanups.
>> - Improve device mode config:
>> - Move USBH_SWAP_CONTROL device mode value to variant variable.
>> - Set USBH_UTMI_CONTROL1 register value (variant variable).
>> v3: introduce changes suggested by Florian:
>> - Add support for device mode.
>> v2: introduce changes suggested by Florian:
>> - Drop OF dependency (use device_get_match_data).
>> - Drop __initconst from variant tables.
>> - Use devm_clk_get_optional.
>>
>> drivers/phy/broadcom/Kconfig | 9 +
>> drivers/phy/broadcom/Makefile | 1 +
>> drivers/phy/broadcom/phy-bcm63xx-usbh.c | 457 ++++++++++++++++++++++++
>> 3 files changed, 467 insertions(+)
>> create mode 100644 drivers/phy/broadcom/phy-bcm63xx-usbh.c
>>
>> diff --git a/drivers/phy/broadcom/Kconfig b/drivers/phy/broadcom/Kconfig
>> index b29f11c19155..a7889df8c541 100644
>> --- a/drivers/phy/broadcom/Kconfig
>> +++ b/drivers/phy/broadcom/Kconfig
>> @@ -2,6 +2,15 @@
>> #
>> # Phy drivers for Broadcom platforms
>> #
>> +config PHY_BCM63XX_USBH
>> + tristate "BCM63xx USBH PHY driver"
>> + depends on BMIPS_GENERIC || COMPILE_TEST
>> + select GENERIC_PHY
>> + default BMIPS_GENERIC
>
> you depend on BMIPS_GENERIC and also use as default?
PHY_CYGNUS_PCIE, PHY_BCM_SR_USB, PHY_NS2_USB_DRD, PHY_BRCM_USB and PHY_BCM_SR_PCIE are doing that, so I just copied it ¯\_(ツ)_/¯.
I will remove the default since there are other SoCs in BMIPS_GENERIC that won’t need this.
>
>> +static int __init bcm63xx_usbh_phy_probe(struct platform_device *pdev)
>> +{
>> + struct device *dev = &pdev->dev;
>> + struct bcm63xx_usbh_phy *usbh;
>> + const struct bcm63xx_usbh_phy_variant *variant;
>> + struct phy *phy;
>> + struct phy_provider *phy_provider;
>> +
>> + usbh = devm_kzalloc(dev, sizeof(*usbh), GFP_KERNEL);
>> + if (!usbh)
>> + return -ENOMEM;
>> +
>> + variant = device_get_match_data(dev);
>> + if (!variant)
>> + return -EINVAL;
>> + usbh->variant = variant;
>> +
>> + usbh->base = devm_platform_ioremap_resource(pdev, 0);
>> + if (IS_ERR(usbh->base))
>> + return PTR_ERR(usbh->base);
>> +
>> + usbh->reset = devm_reset_control_get_exclusive(dev, NULL);
>> + if (IS_ERR(usbh->reset)) {
>> + if (PTR_ERR(usbh->reset) != -EPROBE_DEFER)
>> + dev_err(dev, "failed to get reset\n");
>> + return PTR_ERR(usbh->reset);
>> + }
>> +
>> + usbh->usbh_clk = devm_clk_get_optional(dev, "usbh");
>> + if (IS_ERR(usbh->usbh_clk))
>> + return PTR_ERR(usbh->usbh_clk);
>> +
>> + usbh->usb_ref_clk = devm_clk_get_optional(dev, "usb_ref");
>> + if (IS_ERR(usbh->usb_ref_clk))
>> + return PTR_ERR(usbh->usb_ref_clk);
>> +
>> + phy = devm_phy_create(dev, NULL, &bcm63xx_usbh_phy_ops);
>> + if (IS_ERR(phy)) {
>> + dev_err(dev, "failed to create PHY\n");
>> + return PTR_ERR(phy);
>> + }
>> +
>> + platform_set_drvdata(pdev, usbh);
>> + phy_set_drvdata(phy, usbh);
>> +
>> + phy_provider = devm_of_phy_provider_register(dev,
>> + bcm63xx_usbh_phy_xlate);
>> + if (IS_ERR(phy_provider)) {
>> + dev_err(dev, "failed to register PHY provider\n");
>> + return PTR_ERR(phy_provider);
>> + }
>> +
>> + dev_info(dev, "Registered BCM63xx USB PHY driver\n");
>
> debug level?
Yeah, I will change it.
> --
> ~Vinod
