On Tue, Jul 07, 2020 at 03:40:31PM +0800, Ran Wang wrote: > ls1043a-rdb and ls1043a-qds board’s default HW config (such as > pin mux selection) would not enable some USB controllers’ > data path, which causing over-current detected on those > controllers. This will hit the case of ‘xhci driver prevent bus suspend > if a root hub port detected over-current condition’, causing system > failed to be suspended. So disable them in device tree to resolve this > issue. > > Signed-off-by: Ran Wang <ran.wang_1@xxxxxxx> Applied, thanks.
