On Sat, Jul 04, 2020 at 06:40:43PM -0700, Chris Healy wrote:
> Add node for CAAM device in NXP Vybrid SoC.
>
> Signed-off-by: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
> Signed-off-by: Chris Healy <cphealy@xxxxxxxxx>
> ---
> arch/arm/boot/dts/vfxxx.dtsi | 22 ++++++++++++++++++++++
> 1 file changed, 22 insertions(+)
>
> diff --git a/arch/arm/boot/dts/vfxxx.dtsi b/arch/arm/boot/dts/vfxxx.dtsi
> index 2d547e7b21ad..0fe03aa0367f 100644
> --- a/arch/arm/boot/dts/vfxxx.dtsi
> +++ b/arch/arm/boot/dts/vfxxx.dtsi
> @@ -729,6 +729,28 @@
> dma-names = "rx","tx";
> status = "disabled";
> };
> +
> + crypto: crypto@400f0000 {
> + compatible = "fsl,sec-v4.0";
Please use tab for indentation.
Shawn
> + #address-cells = <1>;
> + #size-cells = <1>;
> + reg = <0x400f0000 0x9000>;
> + ranges = <0 0x400f0000 0x9000>;
> + clocks = <&clks VF610_CLK_CAAM>;
> + clock-names = "ipg";
> +
> + sec_jr0: jr0@1000 {
> + compatible = "fsl,sec-v4.0-job-ring";
> + reg = <0x1000 0x1000>;
> + interrupts = <102 IRQ_TYPE_LEVEL_HIGH>;
> + };
> +
> + sec_jr1: jr1@2000 {
> + compatible = "fsl,sec-v4.0-job-ring";
> + reg = <0x2000 0x1000>;
> + interrupts = <102 IRQ_TYPE_LEVEL_HIGH>;
> + };
> + };
> };
> };
> };
> --
> 2.21.3
