[PATCH 5/9] arm64: dts: qcom: sc7180: Add "simple-bus" to our mdss node

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



As described in the bindings patch, this means that our child nodes
are devices in their own right.

Signed-off-by: Douglas Anderson <dianders@xxxxxxxxxxxx>
---
If this patch lands before the patch ("drm/msm: Avoid manually
populating our children if "simple-bus" is there") it doesn't seem to
be the end of the world.  The first time through
add_display_components() it'll notice that the children are already
populated and it will be a no-op.  When it gets a defer it will then
depouplate them (even though it didn't populate them) and future calls
will just populate them again.

 arch/arm64/boot/dts/qcom/sc7180.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/qcom/sc7180.dtsi b/arch/arm64/boot/dts/qcom/sc7180.dtsi
index 2be81a2a1512..cae6c69fd85a 100644
--- a/arch/arm64/boot/dts/qcom/sc7180.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7180.dtsi
@@ -2594,7 +2594,7 @@ camnoc_virt: interconnect@ac00000 {
 		};
 
 		mdss: mdss@ae00000 {
-			compatible = "qcom,sc7180-mdss";
+			compatible = "qcom,sc7180-mdss", "simple-bus";
 			reg = <0 0x0ae00000 0 0x1000>;
 			reg-names = "mdss";
 
-- 
2.27.0.383.g050319c2ae-goog




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux