This patchset adds support for the global clock controller found on the APQ8084 based platforms. Patches 1,2 can go through clk-next and 3,4 through arm-soc. Changes from v1: - Moved APQ8084 clocks into a separate file and under separate Kconfig entry. Dropped the override function patch from v1. - Added the missing information about resets (suggested by Kumar Gala). - Made the UART DT node "disabled" in dtsi and "okay" in dts (suggested by Kumar Gala) Georgi Djakov (4): clk: qcom: Add APQ8084 Global Clock Controller documentation clk: qcom: Add APQ8084 Global Clock Controller support ARM: dts: qcom: Add APQ8084 Global Clock Controller DT node ARM: dts: qcom: Add APQ8084 serial port DT node .../devicetree/bindings/clock/qcom,gcc.txt | 1 + arch/arm/boot/dts/qcom-apq8084-mtp.dts | 6 + arch/arm/boot/dts/qcom-apq8084.dtsi | 18 + drivers/clk/qcom/Kconfig | 8 + drivers/clk/qcom/Makefile | 1 + drivers/clk/qcom/gcc-apq8084.c | 2951 ++++++++++++++++++++ include/dt-bindings/clock/qcom,gcc-apq8084.h | 337 +++ include/dt-bindings/reset/qcom,gcc-apq8084.h | 116 + 8 files changed, 3438 insertions(+) create mode 100644 drivers/clk/qcom/gcc-apq8084.c create mode 100644 include/dt-bindings/clock/qcom,gcc-apq8084.h create mode 100644 include/dt-bindings/reset/qcom,gcc-apq8084.h -- 1.7.9.5 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
