[PATCH 10/13] ARM: dts: omap5-uevm: Add CMA pools and enable IPU & DSP

[Suman Anna <s-anna@xxxxxx>]

The CMA reserved memory nodes have been added for the IPU and DSP
remoteproc devices on the OMAP5 uEVM board. These nodes are assigned
to the respective rproc device nodes, and both the IPU and DSP remote
processors are enabled for this board.

The current CMA pools and sizes are defined statically for each device.
The starting addresses are fixed to meet current dependencies on the
remote processor firmwares, and will go away when the remote-side
code has been improved to gather this information runtime during
its initialization.

An associated pair of the rproc node and its CMA node can be disabled
later on if there is no use-case defined to use that remote processor.

Signed-off-by: Suman Anna <s-anna@xxxxxx>
---
 arch/arm/boot/dts/omap5-uevm.dts | 30 ++++++++++++++++++++++++++++++
 1 file changed, 30 insertions(+)

diff --git a/arch/arm/boot/dts/omap5-uevm.dts b/arch/arm/boot/dts/omap5-uevm.dts
index 9441e9a572ad..251885656697 100644
--- a/arch/arm/boot/dts/omap5-uevm.dts
+++ b/arch/arm/boot/dts/omap5-uevm.dts
@@ -15,6 +15,26 @@ memory@80000000 {
 		reg = <0 0x80000000 0 0x7f000000>; /* 2032 MB */
 	};
 
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		dsp_memory_region: dsp-memory@95000000 {
+			compatible = "shared-dma-pool";
+			reg = <0 0x95000000 0 0x800000>;
+			reusable;
+			status = "okay";
+		};
+
+		ipu_memory_region: ipu-memory@95800000 {
+			compatible = "shared-dma-pool";
+			reg = <0 0x95800000 0 0x3800000>;
+			reusable;
+			status = "okay";
+		};
+	};
+
 	aliases {
 		ethernet = &ethernet;
 	};
@@ -198,3 +218,13 @@ ethernet: usbether@3 {
 &wlcore {
 	compatible = "ti,wl1837";
 };
+
+&dsp {
+	status = "okay";
+	memory-region = <&dsp_memory_region>;
+};
+
+&ipu {
+	status = "okay";
+	memory-region = <&ipu_memory_region>;
+};
-- 
2.26.0