[PATCH v7 11/11] dmaengine: dw: Initialize max_sg_nents capability

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Multi-block support provides a way to map the kernel-specific SG-table so
the DW DMA device would handle it as a whole instead of handling the
SG-list items or so called LLP block items one by one. So if true LLP
list isn't supported by the DW DMA engine, then soft-LLP mode will be
utilized to load and execute each LLP-block one by one. The soft-LLP mode
of the DMA transactions execution might not work well for some DMA
consumers like SPI due to its Tx and Rx buffers inter-dependency. Let's
initialize the max_sg_nents DMA channels capability based on the nollp
flag state. If it's true, no hardware accelerated LLP is available and
max_sg_nents should be set with 1, which means that the DMA engine
can handle only a single SG list entry at a time. If noLLP is set to
false, then hardware accelerated LLP is supported and the DMA engine
can handle infinite number of SG entries in a single DMA transaction.

Signed-off-by: Serge Semin <Sergey.Semin@xxxxxxxxxxxxxxxxxxxx>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
Cc: Alexey Malahov <Alexey.Malahov@xxxxxxxxxxxxxxxxxxxx>
Cc: Thomas Bogendoerfer <tsbogend@xxxxxxxxxxxxxxxx>
Cc: Arnd Bergmann <arnd@xxxxxxxx>
Cc: Rob Herring <robh+dt@xxxxxxxxxx>
Cc: linux-mips@xxxxxxxxxxxxxxx
Cc: devicetree@xxxxxxxxxxxxxxx

---

Changelog v3:
- This is a new patch created as a result of the discussion with Vinud and
  Andy in the framework of DW DMA burst and LLP capabilities.

Changelog v4:
- Use explicit if-else statement when assigning the max_sg_nents field.
---
 drivers/dma/dw/core.c | 12 ++++++++++++
 1 file changed, 12 insertions(+)

diff --git a/drivers/dma/dw/core.c b/drivers/dma/dw/core.c
index 588b9bae827c..9dee5fa65153 100644
--- a/drivers/dma/dw/core.c
+++ b/drivers/dma/dw/core.c
@@ -1059,6 +1059,18 @@ static void dwc_caps(struct dma_chan *chan, struct dma_slave_caps *caps)
 	struct dw_dma_chan *dwc = to_dw_dma_chan(chan);
 
 	caps->max_burst = dwc->max_burst;
+
+	/*
+	 * It might be crucial for some devices to have the hardware
+	 * accelerated multi-block transfers supported, aka LLPs in DW DMAC
+	 * notation. So if LLPs are supported then max_sg_nents is set to
+	 * zero which means unlimited number of SG entries can be handled in a
+	 * single DMA transaction, otherwise it's just one SG entry.
+	 */
+	if (dwc->nollp)
+		caps->max_sg_nents = 1;
+	else
+		caps->max_sg_nents = 0;
 }
 
 int do_dma_probe(struct dw_dma_chip *chip)
-- 
2.26.2




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux