Re: [RFC PATCH V7 2/3] dt-bindings: mt8183: Add sensor interface dt-bindings

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Wed, Jul 08, 2020 at 06:40:22PM +0800, Louis Kuo wrote:
> This patch adds the DT binding documentation for the sensor interface
> module in Mediatek SoCs.
> 
> Signed-off-by: Louis Kuo <louis.kuo@xxxxxxxxxxxx>
> ---
>  .../bindings/media/mediatek-seninf.yaml       | 223 ++++++++++++++++++
>  1 file changed, 223 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/media/mediatek-seninf.yaml
> 
> diff --git a/Documentation/devicetree/bindings/media/mediatek-seninf.yaml b/Documentation/devicetree/bindings/media/mediatek-seninf.yaml
> new file mode 100644
> index 000000000000..917b393acc0c
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/media/mediatek-seninf.yaml
> @@ -0,0 +1,223 @@
> +# SPDX-License-Identifier: (GPL-2.0+ OR MIT)

Not the right choice:

(GPL-2.0-only OR BSD-2-Clause)

> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/media/mediatek-seninf.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Mediatek Sensor Interface (CSI) Device Tree Bindings
> +
> +maintainers:
> +  - Louis Kuo <louis.kuo@xxxxxxxxxxxx>
> +
> +description: |
> +  Seninf MIPI-CSI2 host driver is a HW camera interface controller. It support
> +  a widely adopted, simple, high-speed protocol primarily intended for
> +  point-to-point image and video transmission between cameras and host devices.
> +
> +properties:
> +  compatible:
> +    const: mediatek,mt8183-seninf
> +
> +  reg:
> +    minItems: 1
> +
> +  interrupts:
> +    maxItems: 1
> +
> +  power-domains:
> +    maxItems: 1
> +
> +  clocks:
> +    items:
> +      - description: Seninf camsys clock
> +      - description: Seninf top mux clock
> +
> +  clock-names:
> +    items:
> +      - const: cam_seninf
> +      - const: top_mux_seninf
> +
> +  phys:
> +    items:
> +      - description: Seninf mipi dphy
> +
> +  phy-names:
> +    items:
> +      - const: seninf
> +
> +  # See ./video-interfaces.txt for details
> +  ports:
> +    type: object
> +    additionalProperties: false
> +
> +    properties:
> +      port@0:
> +        type: object
> +        description: connection point for sensor at port 0
> +        additionalProperties: false
> +
> +        properties:
> +          reg:
> +            const: 0
> +
> +        patternProperties:
> +          endpoint:
> +            type: object
> +            additionalProperties: false
> +
> +            properties:
> +              data-lanes:
> +                minItems: 1
> +                maxItems: 4
> +
> +              remote-endpoint: true
> +
> +      port@1:
> +        type: object
> +        description: connection point for sensor at port 1
> +        additionalProperties: false
> +
> +        properties:
> +          reg:
> +            const: 1
> +
> +        patternProperties:
> +          endpoint:
> +            type: object
> +            additionalProperties: false
> +
> +            properties:
> +              data-lanes:
> +                minItems: 1
> +                maxItems: 4
> +
> +              remote-endpoint: true
> +
> +      port@4:
> +        type: object
> +        description: connection point for camsys
> +        additionalProperties: false
> +
> +        properties:
> +          reg:
> +            const: 4
> +
> +        patternProperties:
> +          endpoint:
> +            type: object
> +            additionalProperties: false
> +
> +            properties:
> +              remote-endpoint: true
> +
> +    required:
> +      - port@0
> +      - port@1
> +      - port@4
> +
> +required:
> +  - compatible
> +  - interrupts
> +  - clocks
> +  - clock-names
> +  - power-domains
> +  - ports
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +
> +    #include <dt-bindings/clock/mt8183-clk.h>
> +    #include <dt-bindings/interrupt-controller/irq.h>
> +    #include <dt-bindings/interrupt-controller/arm-gic.h>
> +    #include <dt-bindings/power/mt8183-power.h>
> +
> +    parent {
> +        #address-cells = <2>;
> +        #size-cells = <2>;
> +
> +        seninf: seninf@1a040000 {
> +            compatible = "mediatek,mt8183-seninf";
> +            reg = <0 0x1a040000 0 0x8000>;
> +            interrupts = <GIC_SPI 251 IRQ_TYPE_LEVEL_LOW>;
> +            power-domains = <&scpsys MT8183_POWER_DOMAIN_CAM>;
> +            clocks = <&camsys CLK_CAM_SENINF>,
> +                <&topckgen CLK_TOP_MUX_SENINF>;
> +            clock-names = "cam_seninf", "top_mux_seninf";
> +            phys = <&mipi_dphy 0>;
> +            phy-names = "seninf";
> +
> +            ports {
> +                #address-cells = <1>;
> +                #size-cells = <0>;
> +
> +                port@0 {
> +                    reg = <0>;
> +                    mipi_in_bcam: endpoint {
> +                        data-lanes = <0 1 3 4>;
> +                        remote-endpoint = <&bcam_out>;
> +                    };
> +                };
> +
> +                port@1 {
> +                    reg = <1>;
> +                    mipi_in_fcam: endpoint {
> +                        data-lanes = <1>;
> +                        remote-endpoint = <&fcam_out>;
> +                    };
> +                };
> +
> +                port@4 {
> +                    reg = <4>;
> +                    seninf_camisp_endpoint: endpoint {
> +                        remote-endpoint = <&camisp_endpoint>;
> +                    };
> +                };
> +            };
> +        };
> +
> +        mipi_dphy: mipi_dphy@11c80000 {

phy@...

> +            compatible = "mediatek,mt8183-mipi_dphy";
> +            reg = <0 0x11C80000 0 0x6000>;
> +            #phy-cells = <1>;
> +        };
> +
> +        i2c2: i2c@11009000 {
> +            reg = <0 0x11009000 0 0x1000>;
> +            clock-frequency = <400000>;
> +            #address-cells = <1>;
> +            #size-cells = <0>;
> +
> +            wcam: camera@36 {
> +                compatible = "ovti,ov5695";
> +                reg = <0x36>;
> +
> +                port {
> +                    bcam_out: endpoint {
> +                        remote-endpoint = <&mipi_in_bcam>;
> +                        data-lanes = <0 1 3 4>;
> +                    };
> +                };
> +            };
> +        };
> +
> +        i2c4: i2c@11008000 {
> +            reg = <0 0x11008000 0 0x1000>;
> +            clock-frequency = <400000>;
> +            #address-cells = <1>;
> +            #size-cells = <0>;
> +
> +            ucam: camera@3c {
> +                compatible = "ovti,ov2685";
> +                reg = <0x3c>;
> +
> +                port {
> +                    fcam_out: endpoint {
> +                        remote-endpoint = <&mipi_in_fcam>;
> +                        data-lanes = <1>;
> +                    };
> +                };
> +            };
> +        };
> +    };
> \ No newline at end of file
> --
> 2.18.0



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux