Add documentation for the newly added DTS support in the shtc1 driver. To align with the drivers logic to have high precision by default a boolean sensirion,low_precision is used to switch to low precision. Signed-off-by: Chris Ruehl <chris.ruehl@xxxxxxxxxxxx> --- .../bindings/hwmon/sensirion,shtc1.yaml | 60 +++++++++++++++++++ 1 file changed, 60 insertions(+) create mode 100644 Documentation/devicetree/bindings/hwmon/sensirion,shtc1.yaml diff --git a/Documentation/devicetree/bindings/hwmon/sensirion,shtc1.yaml b/Documentation/devicetree/bindings/hwmon/sensirion,shtc1.yaml new file mode 100644 index 000000000000..6725a7b646b7 --- /dev/null +++ b/Documentation/devicetree/bindings/hwmon/sensirion,shtc1.yaml @@ -0,0 +1,60 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/hwmon/sensirion,shtc1.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Sensirion SHTC1 Humidity and Temperature Sensor IC + +maintainers: + - chris.ruehl@xxxxxxxxxxxx + +description: | + The SHTC1, SHTW1 and SHTC3 are digital humidity and temperature sensor + designed especially for battery-driven high-volume consumer electronics + applications. + For further information refere to Documentation/hwmon/shtc1.rst + + This binding document describes the binding for the hardware monitor + portion of the driver. + +properties: + compatible: + enum: + - sensirion,shtc1 + - sensirion,shtw1 + - sensirion,shtc3 + + reg: + maxItems: 1 + description: I2C address 0x70 + + sensirion,blocking_io: + $ref: /schemas/types.yaml#definitions/flag + description: + If set the i2c bus hold until measure finished. + + sensirion,low_precision: + $ref: /schemas/types.yaml#definitions/flag + description: + If set aquire data with low precision (not recommended). + The driver aquire data with high precision by default. + +required: + - compatible + - reg + +examples: + - | + i2c1 { + status = "okay"; + clock-frequency = <400000>; + + shtc3@70 { + compatible = "sensirion,shtc3"; + reg = <0x70> + sensirion,blocking_io; + status = "okay"; + }; + }; +... -- 2.20.1
